1. 0.00 s $ /nix/store/9ypz3flqsrl5xl495mm8h645gadjsxi1-coreutils-9.11/bin/timeout --kill-after=15s 7200s /nix/store/23zk8sgzamrbmj1fday15szf7f2279s8-nix-2.34.7/bin/nix --extra-experimental-features nix-command --extra-experimental-features flakes --log-format internal-json build --no-link --print-out-paths git+https://github.com/alphal00p/gammaloop?ref=advanced_sampling&rev=570bfeb7853ea307faf1a1ba57bad34ea6e0c55b&shallow=1#checks.x86_64-linux.gammaloop-clippy --print-build-logs
  2. 4.11 s
  3. 5.51 s Building /nix/store/chlmhmgq6rv00z64gh1dl1zxzvaxdj0f-gammaloop-workspace-clippy-0.1.0.drv
  4. 5.61 s [gammaloop-workspace-clippy] Phase: unpackPhase
  5. 5.61 s [gammaloop-workspace-clippy] unpacking source archive /nix/store/42m9v5ar5shnj6429lwrdlzclflxikj0-source
  6. 5.78 s [gammaloop-workspace-clippy] source root is source
  7. 5.82 s [gammaloop-workspace-clippy] Phase: patchPhase
  8. 5.82 s [gammaloop-workspace-clippy] Executing configureCargoCommonVars
  9. 5.82 s [gammaloop-workspace-clippy] decompressing cargo artifacts from /nix/store/50vpxlcgfxf2d57i27v3d10zjwxxbm2r-gammaloop-workspace-deps-deps-0.1.0/target.tar.zst to target
  10. 9.34 s [gammaloop-workspace-clippy] Phase: updateAutotoolsGnuConfigScriptsPhase
  11. 9.41 s [gammaloop-workspace-clippy] Phase: configurePhase
  12. 9.41 s [gammaloop-workspace-clippy] will append /build/source/.cargo-home/config.toml with contents of /nix/store/5drf77x6km4ky7gwlrzdx9bbd6fz09g3-vendor-cargo-deps/config.toml
  13. 9.42 s [gammaloop-workspace-clippy] default configurePhase, nothing to do
  14. 9.42 s [gammaloop-workspace-clippy] Phase: buildPhase
  15. 9.43 s [gammaloop-workspace-clippy] +++ command cargo --version
  16. 9.43 s [gammaloop-workspace-clippy] cargo 1.97.0 (c980f4866 2026-06-30)
  17. 9.48 s [gammaloop-workspace-clippy] +++ command cargo clippy --profile ci-optim --locked --workspace --features gammaloop-tracing-filter/clap,gammaloop-tracing-filter/symbolica,idenso/bincode,idenso/reference-cases,linnet/bincode,linnet/drawing,linnet/rkyv,linnet/serde,linnet/symbolica,spenso-macros/shadowing,spenso/shadowing,symbolica/tracing_max_level_info,three-dimensional-reps/display,three-dimensional-reps/eval,three-dimensional-reps/serde --all-targets --no-deps -- --deny warnings
  18. 10.47 s [gammaloop-workspace-clippy] Checking cfg-if v1.0.4
  19. 10.47 s [gammaloop-workspace-clippy] Checking memchr v2.8.0
  20. 10.47 s [gammaloop-workspace-clippy] Checking once_cell v1.21.4
  21. 10.50 s [gammaloop-workspace-clippy] Checking either v1.15.0
  22. 10.50 s [gammaloop-workspace-clippy] Checking serde_core v1.0.228
  23. 10.51 s [gammaloop-workspace-clippy] Checking libc v0.2.186
  24. 10.53 s [gammaloop-workspace-clippy] Checking libm v0.2.16
  25. 10.56 s [gammaloop-workspace-clippy] Checking itoa v1.0.18
  26. 10.56 s [gammaloop-workspace-clippy] Checking log v0.4.29
  27. 10.56 s [gammaloop-workspace-clippy] Checking regex-syntax v0.8.10
  28. 10.61 s [gammaloop-workspace-clippy] Checking zerocopy v0.8.48
  29. 10.62 s [gammaloop-workspace-clippy] Checking crossbeam-utils v0.8.21
  30. 10.62 s [gammaloop-workspace-clippy] Checking equivalent v1.0.2
  31. 10.62 s [gammaloop-workspace-clippy] Checking zmij v1.0.21
  32. 10.64 s [gammaloop-workspace-clippy] Checking lazy_static v1.5.0
  33. 10.64 s [gammaloop-workspace-clippy] Checking bytemuck v1.25.0
  34. 10.64 s [gammaloop-workspace-clippy] Compiling target-lexicon v0.13.5
  35. 10.74 s [gammaloop-workspace-clippy] Checking arrayvec v0.7.6
  36. 10.83 s [gammaloop-workspace-clippy] Checking powerfmt v0.2.0
  37. 10.90 s [gammaloop-workspace-clippy] Checking pin-project-lite v0.2.17
  38. 11.02 s [gammaloop-workspace-clippy] Checking num_threads v0.1.7
  39. 11.04 s [gammaloop-workspace-clippy] Checking num-conv v0.2.1
  40. 11.09 s [gammaloop-workspace-clippy] Checking itertools v0.14.0
  41. 11.10 s [gammaloop-workspace-clippy] Checking time-core v0.1.8
  42. 11.16 s [gammaloop-workspace-clippy] Checking deranged v0.5.8
  43. 11.19 s [gammaloop-workspace-clippy] Checking tracing-core v0.1.36
  44. 11.20 s [gammaloop-workspace-clippy] Checking foldhash v0.2.0
  45. 11.27 s [gammaloop-workspace-clippy] Checking allocator-api2 v0.2.21
  46. 11.36 s [gammaloop-workspace-clippy] Checking const-random v0.1.18
  47. 11.39 s [gammaloop-workspace-clippy] Checking safe_arch v0.7.4
  48. 11.45 s [gammaloop-workspace-clippy] Checking static_assertions v1.1.0
  49. 11.47 s [gammaloop-workspace-clippy] Checking winnow v1.0.2
  50. 11.54 s [gammaloop-workspace-clippy] Checking nu-ansi-term v0.50.3
  51. 11.80 s [gammaloop-workspace-clippy] Checking hashbrown v0.16.1
  52. 11.95 s [gammaloop-workspace-clippy] Checking unty v0.0.4
  53. 12.01 s [gammaloop-workspace-clippy] Checking safe_arch v1.0.0
  54. 12.17 s [gammaloop-workspace-clippy] Checking sharded-slab v0.1.7
  55. 12.23 s [gammaloop-workspace-clippy] Checking crossbeam-epoch v0.9.18
  56. 12.30 s [gammaloop-workspace-clippy] Checking aho-corasick v1.1.4
  57. 12.33 s [gammaloop-workspace-clippy] Checking tracing v0.1.44
  58. 12.64 s [gammaloop-workspace-clippy] Checking wide v0.7.33
  59. 12.86 s [gammaloop-workspace-clippy] Checking crossbeam-deque v0.8.6
  60. 13.08 s [gammaloop-workspace-clippy] Checking tracing-log v0.2.0
  61. 13.21 s [gammaloop-workspace-clippy] Checking thread_local v1.1.9
  62. 13.32 s [gammaloop-workspace-clippy] Checking toml_writer v1.1.1+spec-1.1.0
  63. 13.33 s [gammaloop-workspace-clippy] Checking az v1.3.0
  64. 13.46 s [gammaloop-workspace-clippy] Checking indenter v0.3.4
  65. 13.53 s [gammaloop-workspace-clippy] Checking wide v1.3.0
  66. 13.70 s [gammaloop-workspace-clippy] Compiling phf_shared v0.11.3
  67. 13.71 s [gammaloop-workspace-clippy] Checking anyhow v1.0.102
  68. 13.83 s [gammaloop-workspace-clippy] Checking utf8parse v0.2.2
  69. 13.85 s [gammaloop-workspace-clippy] Checking rayon-core v1.13.0
  70. 13.93 s [gammaloop-workspace-clippy] Checking alloc-no-stdlib v2.0.4
  71. 13.99 s [gammaloop-workspace-clippy] Checking rawpointer v0.2.1
  72. 14.08 s [gammaloop-workspace-clippy] Checking dyn-clone v1.0.20
  73. 14.19 s [gammaloop-workspace-clippy] Checking matrixmultiply v0.3.10
  74. 14.32 s [gammaloop-workspace-clippy] Checking getrandom v0.3.4
  75. 14.34 s [gammaloop-workspace-clippy] Checking time v0.3.47
  76. 14.36 s [gammaloop-workspace-clippy] Checking gmp-mpfr-sys v1.7.1
  77. 14.46 s [gammaloop-workspace-clippy] Checking alloc-stdlib v0.2.2
  78. 14.60 s [gammaloop-workspace-clippy] Checking anstyle-parse v1.0.0
  79. 14.63 s [gammaloop-workspace-clippy] Checking rand_core v0.9.5
  80. 14.86 s [gammaloop-workspace-clippy] Checking rayon v1.12.0
  81. 14.97 s [gammaloop-workspace-clippy] Checking colorchoice v1.0.5
  82. 15.00 s [gammaloop-workspace-clippy] Checking colored v3.1.1
  83. 15.05 s [gammaloop-workspace-clippy] Checking toml_parser v1.1.2+spec-1.1.0
  84. 15.08 s [gammaloop-workspace-clippy] Checking anstyle-query v1.1.5
  85. 15.09 s [gammaloop-workspace-clippy] Checking is_terminal_polyfill v1.70.2
  86. 15.12 s [gammaloop-workspace-clippy] Checking num-traits v0.2.19
  87. 15.15 s [gammaloop-workspace-clippy] Checking anstyle v1.0.14
  88. 15.26 s [gammaloop-workspace-clippy] Compiling phf_generator v0.11.3
  89. 15.32 s [gammaloop-workspace-clippy] Checking eyre v0.6.12
  90. 15.48 s [gammaloop-workspace-clippy] Checking bitflags v1.3.2
  91. 15.60 s [gammaloop-workspace-clippy] Checking unicode-width v0.2.2
  92. 15.62 s [gammaloop-workspace-clippy] Checking region v3.0.2
  93. 15.65 s [gammaloop-workspace-clippy] Checking anstream v1.0.0
  94. 15.81 s [gammaloop-workspace-clippy] Compiling phf_codegen v0.11.3
  95. 15.96 s [gammaloop-workspace-clippy] Checking brotli-decompressor v5.0.0
  96. 15.97 s [gammaloop-workspace-clippy] Checking hugepage-rs v0.1.1
  97. 16.08 s [gammaloop-workspace-clippy] Checking wasmtime-jit-icache-coherence v34.0.2
  98. 16.11 s [gammaloop-workspace-clippy] Compiling pyo3-build-config v0.28.3
  99. 16.15 s [gammaloop-workspace-clippy] Checking spec_math v0.1.6
  100. 16.16 s [gammaloop-workspace-clippy] Checking inventory v0.3.24
  101. 16.17 s [gammaloop-workspace-clippy] Checking thiserror v2.0.18
  102. 16.20 s [gammaloop-workspace-clippy] Compiling getopts v0.2.24
  103. 16.23 s [gammaloop-workspace-clippy] Checking libloading v0.9.0
  104. 16.26 s [gammaloop-workspace-clippy] Checking bytes v1.11.1
  105. 16.28 s [gammaloop-workspace-clippy] Checking byteorder v1.5.0
  106. 16.33 s [gammaloop-workspace-clippy] Checking self_cell v1.2.2
  107. 16.38 s [gammaloop-workspace-clippy] Checking tinyjson v2.5.1
  108. 16.41 s [gammaloop-workspace-clippy] Checking append-only-vec v0.1.8
  109. 16.54 s [gammaloop-workspace-clippy] Compiling unicode_names2_generator v1.3.0
  110. 16.59 s [gammaloop-workspace-clippy] Checking linux-raw-sys v0.12.1
  111. 16.61 s [gammaloop-workspace-clippy] Compiling unic-char-range v0.9.0
  112. 16.70 s [gammaloop-workspace-clippy] Checking regex-automata v0.4.14
  113. 16.75 s [gammaloop-workspace-clippy] Checking approx v0.5.1
  114. 16.79 s [gammaloop-workspace-clippy] Checking num-integer v0.1.46
  115. 16.85 s [gammaloop-workspace-clippy] Compiling unic-common v0.9.0
  116. 16.87 s [gammaloop-workspace-clippy] Compiling unic-char-property v0.9.0
  117. 16.90 s [gammaloop-workspace-clippy] Compiling is-macro v0.3.7
  118. 16.92 s [gammaloop-workspace-clippy] Checking serde v1.0.228
  119. 17.04 s [gammaloop-workspace-clippy] Checking serde_json v1.0.149
  120. 17.05 s [gammaloop-workspace-clippy] Checking bitflags v2.11.1
  121. 17.12 s [gammaloop-workspace-clippy] Checking serde_spanned v1.1.1
  122. 17.16 s [gammaloop-workspace-clippy] Checking toml_datetime v1.1.1+spec-1.1.0
  123. 17.18 s [gammaloop-workspace-clippy] Checking brotli v8.0.2
  124. 17.31 s [gammaloop-workspace-clippy] Checking rustix v1.1.4
  125. 17.32 s [gammaloop-workspace-clippy] Compiling unic-ucd-version v0.9.0
  126. 17.43 s [gammaloop-workspace-clippy] Compiling rustpython-parser-vendored v0.4.0
  127. 17.45 s [gammaloop-workspace-clippy] Checking iana-time-zone v0.1.65
  128. 17.48 s [gammaloop-workspace-clippy] Checking toml v1.1.2+spec-1.1.0
  129. 17.58 s [gammaloop-workspace-clippy] Checking smallvec v1.15.1
  130. 17.62 s [gammaloop-workspace-clippy] Checking num-complex v0.4.6
  131. 17.91 s [gammaloop-workspace-clippy] Checking bincode v2.0.1
  132. 18.01 s [gammaloop-workspace-clippy] Checking tracing-serde v0.2.0
  133. 18.07 s [gammaloop-workspace-clippy] Checking smartstring v1.0.1
  134. 18.15 s [gammaloop-workspace-clippy] Checking chrono v0.4.44
  135. 18.28 s [gammaloop-workspace-clippy] Compiling rustpython-parser v0.4.0
  136. 18.32 s [gammaloop-workspace-clippy] Checking simba v0.9.1
  137. 18.42 s [gammaloop-workspace-clippy] Compiling phf v0.11.3
  138. 18.45 s [gammaloop-workspace-clippy] Checking rustc-hash v2.1.2
  139. 18.52 s [gammaloop-workspace-clippy] Checking ndarray v0.17.2
  140. 18.55 s [gammaloop-workspace-clippy] Compiling unic-emoji-char v0.9.0
  141. 18.62 s [gammaloop-workspace-clippy] Compiling unic-ucd-ident v0.9.0
  142. 18.91 s [gammaloop-workspace-clippy] Compiling lalrpop-util v0.20.2
  143. 18.96 s [gammaloop-workspace-clippy] Compiling rustc-hash v1.1.0
  144. 18.99 s [gammaloop-workspace-clippy] Checking rug v1.30.0
  145. 19.16 s [gammaloop-workspace-clippy] Compiling symbolica v2.2.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  146. 19.31 s [gammaloop-workspace-clippy] Checking unicode-segmentation v1.13.2
  147. 19.54 s [gammaloop-workspace-clippy] Checking typenum v1.20.0
  148. 19.55 s [gammaloop-workspace-clippy] Checking getrandom v0.2.17
  149. 19.64 s [gammaloop-workspace-clippy] Checking ppv-lite86 v0.2.21
  150. 19.80 s [gammaloop-workspace-clippy] Checking ahash v0.8.12
  151. 20.25 s [gammaloop-workspace-clippy] Checking scopeguard v1.2.0
  152. 20.29 s [gammaloop-workspace-clippy] Checking parking_lot_core v0.9.12
  153. 20.35 s [gammaloop-workspace-clippy] Checking unicode-ident v1.0.24
  154. 20.37 s [gammaloop-workspace-clippy] Checking hashbrown v0.17.0
  155. 20.39 s [gammaloop-workspace-clippy] Checking lock_api v0.4.14
  156. 20.39 s [gammaloop-workspace-clippy] Checking terminal_size v0.4.4
  157. 20.44 s [gammaloop-workspace-clippy] Checking errno v0.3.14
  158. 20.53 s [gammaloop-workspace-clippy] Checking rand_chacha v0.9.0
  159. 20.55 s [gammaloop-workspace-clippy] Checking clap_lex v1.1.0
  160. 20.61 s [gammaloop-workspace-clippy] Checking unicase v2.9.0
  161. 20.63 s [gammaloop-workspace-clippy] Checking strsim v0.11.1
  162. 20.73 s [gammaloop-workspace-clippy] Checking signal-hook-registry v1.4.8
  163. 20.80 s [gammaloop-workspace-clippy] Checking rand v0.9.4
  164. 20.88 s [gammaloop-workspace-clippy] Checking vte v0.14.1
  165. 20.93 s [gammaloop-workspace-clippy] Checking parking_lot v0.12.5
  166. 20.98 s [gammaloop-workspace-clippy] Checking clap_builder v4.6.0
  167. 20.98 s [gammaloop-workspace-clippy] Checking generic-array v0.14.7
  168. 21.01 s [gammaloop-workspace-clippy] Checking same-file v1.0.6
  169. 21.21 s [gammaloop-workspace-clippy] Checking walkdir v2.5.0
  170. 21.23 s [gammaloop-workspace-clippy] Checking signal-hook v0.3.18
  171. 21.25 s [gammaloop-workspace-clippy] Checking half v2.7.1
  172. 21.32 s [gammaloop-workspace-clippy] Checking indexmap v2.14.0
  173. 21.50 s [gammaloop-workspace-clippy] Checking mio v1.2.0
  174. 21.56 s [gammaloop-workspace-clippy] Checking symjit v2.21.0
  175. 21.66 s [gammaloop-workspace-clippy] Checking ciborium-io v0.2.2
  176. 21.68 s [gammaloop-workspace-clippy] Checking matchers v0.2.0
  177. 21.70 s [gammaloop-workspace-clippy] Checking regex v1.12.3
  178. 21.78 s [gammaloop-workspace-clippy] Checking minimal-lexical v0.2.1
  179. 21.88 s [gammaloop-workspace-clippy] Checking tracing-subscriber v0.3.23
  180. 22.09 s [gammaloop-workspace-clippy] Checking signal-hook-mio v0.2.5
  181. 22.12 s [gammaloop-workspace-clippy] Checking nom v7.1.3
  182. 22.24 s [gammaloop-workspace-clippy] Checking ciborium-ll v0.2.2
  183. 22.29 s [gammaloop-workspace-clippy] Checking derive_more v2.1.1
  184. 22.39 s [gammaloop-workspace-clippy] Checking num-bigint v0.4.6
  185. 22.44 s [gammaloop-workspace-clippy] Checking crypto-common v0.1.7
  186. 22.51 s [gammaloop-workspace-clippy] Checking block-buffer v0.10.4
  187. 22.58 s [gammaloop-workspace-clippy] Checking console v0.16.3
  188. 22.61 s [gammaloop-workspace-clippy] Checking bstr v1.12.1
  189. 22.73 s [gammaloop-workspace-clippy] Checking digest v0.10.7
  190. 23.00 s [gammaloop-workspace-clippy] Checking linux-raw-sys v0.4.15
  191. 23.20 s [gammaloop-workspace-clippy] Checking cpufeatures v0.2.17
  192. 23.23 s [gammaloop-workspace-clippy] Checking winnow v0.7.15
  193. 23.25 s [gammaloop-workspace-clippy] Checking sha2 v0.10.9
  194. 23.38 s [gammaloop-workspace-clippy] Compiling unicode_names2 v1.3.0
  195. 23.44 s [gammaloop-workspace-clippy] Checking globset v0.4.18
  196. 23.73 s [gammaloop-workspace-clippy] Checking clap v4.6.1
  197. 23.82 s [gammaloop-workspace-clippy] Checking ciborium v0.2.2
  198. 23.86 s [gammaloop-workspace-clippy] Checking getrandom v0.4.2
  199. 23.90 s [gammaloop-workspace-clippy] Checking rustix v0.38.44
  200. 24.08 s [gammaloop-workspace-clippy] Checking rand_core v0.6.4
  201. 24.21 s [gammaloop-workspace-clippy] Checking fastrand v2.4.1
  202. 24.27 s [gammaloop-workspace-clippy] Checking ansitok v0.3.0
  203. 24.36 s [gammaloop-workspace-clippy] Checking fnv v1.0.7
  204. 24.38 s [gammaloop-workspace-clippy] Checking plotters-backend v0.3.7
  205. 24.48 s [gammaloop-workspace-clippy] Checking rust-embed-utils v8.11.0
  206. 24.50 s [gammaloop-workspace-clippy] Checking serde_spanned v0.6.9
  207. 24.57 s [gammaloop-workspace-clippy] Checking tempfile v3.27.0
  208. 24.62 s [gammaloop-workspace-clippy] Checking toml_datetime v0.6.11
  209. 24.68 s [gammaloop-workspace-clippy] Checking itertools v0.10.5
  210. 24.75 s [gammaloop-workspace-clippy] Checking tap v1.0.1
  211. 24.85 s [gammaloop-workspace-clippy] Checking crossterm v0.28.1
  212. 24.86 s [gammaloop-workspace-clippy] Checking cast v0.3.0
  213. 24.90 s [gammaloop-workspace-clippy] Checking toml_write v0.1.2
  214. 24.94 s [gammaloop-workspace-clippy] Checking plotters-svg v0.3.7
  215. 24.95 s [gammaloop-workspace-clippy] Checking wyz v0.5.1
  216. 25.06 s [gammaloop-workspace-clippy] Checking rand_chacha v0.3.1
  217. 25.16 s [gammaloop-workspace-clippy] Checking radium v0.7.0
  218. 25.16 s [gammaloop-workspace-clippy] Checking ansi-str v0.9.0
  219. 25.19 s [gammaloop-workspace-clippy] Checking typeid v1.0.3
  220. 25.22 s [gammaloop-workspace-clippy] Checking plotters v0.3.7
  221. 25.26 s [gammaloop-workspace-clippy] Checking similar v2.7.0
  222. 25.31 s [gammaloop-workspace-clippy] Checking tinytemplate v1.2.1
  223. 25.38 s [gammaloop-workspace-clippy] Checking is-terminal v0.4.17
  224. 25.52 s [gammaloop-workspace-clippy] Checking bytecount v0.6.9
  225. 25.67 s [gammaloop-workspace-clippy] Checking oorandom v11.1.5
  226. 25.68 s [gammaloop-workspace-clippy] Checking funty v2.0.0
  227. 25.75 s [gammaloop-workspace-clippy] Checking toml_edit v0.22.27
  228. 25.79 s [gammaloop-workspace-clippy] Checking anes v0.1.6
  229. 25.96 s [gammaloop-workspace-clippy] Checking papergrid v0.17.0
  230. 26.08 s [gammaloop-workspace-clippy] Checking rand v0.8.6
  231. 26.17 s [gammaloop-workspace-clippy] Checking ron v0.12.1
  232. 26.23 s [gammaloop-workspace-clippy] Checking criterion-plot v0.5.0
  233. 26.26 s [gammaloop-workspace-clippy] Checking testing_table v0.3.0
  234. 26.27 s [gammaloop-workspace-clippy] Checking xprec v0.2.2
  235. 26.27 s [gammaloop-workspace-clippy] Checking toml_edit v0.25.11+spec-1.1.0
  236. 26.40 s [gammaloop-workspace-clippy] Checking env_filter v1.0.1
  237. 26.62 s [gammaloop-workspace-clippy] Checking bitvec v1.0.1
  238. 26.65 s [gammaloop-workspace-clippy] Checking uncased v0.9.10
  239. 26.66 s [gammaloop-workspace-clippy] Checking jiff v0.2.24
  240. 26.66 s [gammaloop-workspace-clippy] Checking ptr_meta v0.1.4
  241. 26.68 s [gammaloop-workspace-clippy] Checking ucd-trie v0.1.7
  242. 26.77 s [gammaloop-workspace-clippy] Checking simdutf8 v0.1.5
  243. 26.79 s [gammaloop-workspace-clippy] Checking criterion v0.5.1
  244. 26.81 s [gammaloop-workspace-clippy] Compiling pyo3-macros-backend v0.28.3
  245. 26.83 s [gammaloop-workspace-clippy] Compiling pyo3-ffi v0.28.3
  246. 26.88 s [gammaloop-workspace-clippy] Compiling pyo3 v0.28.3
  247. 27.17 s [gammaloop-workspace-clippy] Compiling numpy v0.28.0
  248. 27.18 s [gammaloop-workspace-clippy] Checking bytecheck v0.6.12
  249. 27.52 s [gammaloop-workspace-clippy] Checking pest v2.8.6
  250. 27.71 s [gammaloop-workspace-clippy] Checking ahash v0.7.8
  251. 27.73 s [gammaloop-workspace-clippy] Checking tabled v0.20.0
  252. 27.77 s [gammaloop-workspace-clippy] Checking approx v0.4.0
  253. 27.89 s [gammaloop-workspace-clippy] Checking insta v1.47.2
  254. 27.91 s [gammaloop-workspace-clippy] Checking seahash v4.1.0
  255. 27.92 s [gammaloop-workspace-clippy] Checking hashbrown v0.12.3
  256. 28.00 s [gammaloop-workspace-clippy] Checking cgmath v0.18.0
  257. 28.28 s [gammaloop-workspace-clippy] Checking num-rational v0.4.2
  258. 28.42 s [gammaloop-workspace-clippy] Checking rend v0.4.2
  259. 28.59 s [gammaloop-workspace-clippy] Checking num-iter v0.1.45
  260. 28.62 s [gammaloop-workspace-clippy] Checking toml v0.8.23
  261. 28.76 s [gammaloop-workspace-clippy] Checking ref-ops v0.2.5
  262. 28.83 s [gammaloop-workspace-clippy] Checking rand_xoshiro v0.6.0
  263. 28.95 s [gammaloop-workspace-clippy] Checking num v0.4.3
  264. 29.03 s [gammaloop-workspace-clippy] Checking features v0.10.0
  265. 29.08 s [gammaloop-workspace-clippy] Checking constcat v0.5.1
  266. 29.12 s [gammaloop-workspace-clippy] Checking gat-lending-iterator v0.1.8
  267. 29.18 s [gammaloop-workspace-clippy] Checking colored v2.2.0
  268. 29.23 s [gammaloop-workspace-clippy] Checking cpufeatures v0.3.0
  269. 29.34 s [gammaloop-workspace-clippy] Checking constant_time_eq v0.4.2
  270. 29.40 s [gammaloop-workspace-clippy] Checking arrayref v0.3.9
  271. 29.47 s [gammaloop-workspace-clippy] Checking base64 v0.22.1
  272. 29.47 s [gammaloop-workspace-clippy] Checking joinery v2.1.0
  273. 29.50 s [gammaloop-workspace-clippy] Checking blake3 v1.8.5
  274. 29.55 s [gammaloop-workspace-clippy] Checking dot-parser v0.5.1
  275. 29.57 s [gammaloop-workspace-clippy] Checking figment v0.10.19
  276. 29.68 s [gammaloop-workspace-clippy] Checking siphasher v1.0.2
  277. 29.70 s [gammaloop-workspace-clippy] Checking titlecase v2.2.1
  278. 29.85 s [gammaloop-workspace-clippy] Checking phf_shared v0.13.1
  279. 29.85 s [gammaloop-workspace-clippy] Checking rust_lisp v0.18.0
  280. 29.96 s [gammaloop-workspace-clippy] Checking subprocess v0.2.15
  281. 30.07 s [gammaloop-workspace-clippy] Compiling vakint v0.1.2 (/build/source/crates/vakint)
  282. 30.14 s [gammaloop-workspace-clippy] Checking version-compare v0.2.1
  283. 30.27 s [gammaloop-workspace-clippy] Checking xpct v0.5.1
  284. 30.33 s [gammaloop-workspace-clippy] Checking phf v0.13.1
  285. 30.43 s [gammaloop-workspace-clippy] Checking ryu v1.0.23
  286. 30.54 s [gammaloop-workspace-clippy] Compiling rustpython-parser-core v0.4.0
  287. 30.65 s [gammaloop-workspace-clippy] Checking castaway v0.2.4
  288. 30.68 s [gammaloop-workspace-clippy] Checking toml_datetime v0.7.5+spec-1.1.0
  289. 30.75 s [gammaloop-workspace-clippy] Checking strum v0.27.2
  290. 30.79 s [gammaloop-workspace-clippy] Checking unicode-truncate v2.0.1
  291. 30.83 s [gammaloop-workspace-clippy] Checking kasuari v0.4.12
  292. 30.85 s [gammaloop-workspace-clippy] Checking compact_str v0.9.0
  293. 30.95 s [gammaloop-workspace-clippy] Checking lru v0.16.4
  294. 31.01 s [gammaloop-workspace-clippy] Checking vte v0.15.0
  295. 31.10 s [gammaloop-workspace-clippy] Checking portable-atomic v1.13.1
  296. 31.16 s [gammaloop-workspace-clippy] Compiling rustpython-ast v0.4.0
  297. 31.21 s [gammaloop-workspace-clippy] Checking vt100 v0.16.2
  298. 31.24 s [gammaloop-workspace-clippy] Checking toml v0.9.12+spec-1.1.0
  299. 31.26 s [gammaloop-workspace-clippy] Checking unit-prefix v0.5.2
  300. 31.31 s [gammaloop-workspace-clippy] Checking rand_distr v0.4.3
  301. 31.45 s [gammaloop-workspace-clippy] Checking simba v0.6.0
  302. 31.55 s [gammaloop-workspace-clippy] Checking line-clipping v0.3.7
  303. 31.56 s [gammaloop-workspace-clippy] Checking adler2 v2.0.1
  304. 31.58 s [gammaloop-workspace-clippy] Checking string-template-plus v0.4.3
  305. 31.65 s [gammaloop-workspace-clippy] Compiling three-dimensional-reps v0.1.0 (/build/source/crates/three-dimensional-reps)
  306. 31.71 s [gammaloop-workspace-clippy] Checking gimli v0.32.3
  307. 31.86 s [gammaloop-workspace-clippy] Checking miniz_oxide v0.8.9
  308. 32.06 s [gammaloop-workspace-clippy] Checking thiserror v1.0.69
  309. 32.16 s [gammaloop-workspace-clippy] Checking derive_builder v0.11.2
  310. 32.18 s [gammaloop-workspace-clippy] Checking crossterm v0.29.0
  311. 32.32 s [gammaloop-workspace-clippy] Checking object v0.37.3
  312. 32.34 s [gammaloop-workspace-clippy] Checking owo-colors v4.3.0
  313. 32.39 s [gammaloop-workspace-clippy] Checking tracing-error v0.2.1
  314. 32.45 s [gammaloop-workspace-clippy] Checking typed-index-collections v3.5.0
  315. 32.63 s [gammaloop-workspace-clippy] Checking ratatui-core v0.1.0
  316. 32.71 s [gammaloop-workspace-clippy] Checking serde-big-array v0.5.1
  317. 32.95 s [gammaloop-workspace-clippy] Checking amd v0.2.2
  318. 32.97 s [gammaloop-workspace-clippy] Checking indicatif v0.18.4
  319. 33.10 s [gammaloop-workspace-clippy] Checking itertools v0.11.0
  320. 33.21 s [gammaloop-workspace-clippy] Compiling gammaloop-tracing-filter-macros v0.1.0 (/build/source/crates/gammaloop-tracing-filter-macros)
  321. 33.50 s [gammaloop-workspace-clippy] Checking option-ext v0.2.0
  322. 33.52 s [gammaloop-workspace-clippy] Checking rustc-demangle v0.1.27
  323. 33.63 s [gammaloop-workspace-clippy] Checking dirs-sys v0.5.0
  324. 33.94 s [gammaloop-workspace-clippy] Checking color-spantrace v0.3.0
  325. 33.95 s [gammaloop-workspace-clippy] Checking ref-cast v1.0.25
  326. 34.04 s [gammaloop-workspace-clippy] Checking nix v0.31.2
  327. 34.05 s [gammaloop-workspace-clippy] Checking integer-sqrt v0.1.5
  328. 34.14 s [gammaloop-workspace-clippy] Checking brotli-decompressor v4.0.3
  329. 34.19 s [gammaloop-workspace-clippy] Checking crossbeam-channel v0.5.15
  330. 34.25 s [gammaloop-workspace-clippy] Checking itertools v0.12.1
  331. 34.28 s [gammaloop-workspace-clippy] Checking symlink v0.1.0
  332. 34.44 s [gammaloop-workspace-clippy] Checking unsafe-libyaml v0.2.11
  333. 34.49 s [gammaloop-workspace-clippy] Compiling gammalooprs v0.3.4 (/build/source/crates/gammalooprs)
  334. 34.60 s [gammaloop-workspace-clippy] Checking ratatui-widgets v0.3.0
  335. 34.69 s [gammaloop-workspace-clippy] Checking env_logger v0.11.10
  336. 35.22 s [gammaloop-workspace-clippy] Checking ratatui-crossterm v0.1.0
  337. 35.37 s [gammaloop-workspace-clippy] Checking tracing-appender v0.2.5
  338. 35.64 s [gammaloop-workspace-clippy] Checking tracing-indicatif v0.3.14
  339. 35.79 s [gammaloop-workspace-clippy] Checking ctrlc v3.5.2
  340. 35.92 s [gammaloop-workspace-clippy] Checking include_dir v0.7.4
  341. 35.94 s [gammaloop-workspace-clippy] Checking pathfinding v4.15.0
  342. 36.07 s [gammaloop-workspace-clippy] Checking rkyv v0.7.46
  343. 36.37 s [gammaloop-workspace-clippy] Checking schemars v1.2.1
  344. 36.40 s [gammaloop-workspace-clippy] Checking dirs v6.0.0
  345. 36.55 s [gammaloop-workspace-clippy] Checking slotmap v1.1.1
  346. 36.74 s [gammaloop-workspace-clippy] Checking serde_yaml v0.9.34+deprecated
  347. 36.93 s [gammaloop-workspace-clippy] Checking json5 v0.4.1
  348. 37.13 s [gammaloop-workspace-clippy] Checking clarabel v0.11.1
  349. 37.20 s [gammaloop-workspace-clippy] Checking vectorize v0.2.0
  350. 37.29 s [gammaloop-workspace-clippy] Checking base62 v2.2.4
  351. 37.43 s [gammaloop-workspace-clippy] Checking brotli v7.0.0
  352. 37.52 s [gammaloop-workspace-clippy] Checking ringbuffer v0.16.0
  353. 38.23 s [gammaloop-workspace-clippy] Checking rust-embed v8.11.0
  354. 38.28 s [gammaloop-workspace-clippy] Checking addr2line v0.25.1
  355. 38.34 s [gammaloop-workspace-clippy] Checking clap_complete v4.6.3
  356. 38.44 s [gammaloop-workspace-clippy] Checking strip-ansi-escapes v0.2.1
  357. 38.48 s [gammaloop-workspace-clippy] Checking fd-lock v4.0.4
  358. 38.72 s [gammaloop-workspace-clippy] Compiling gammaloop-api v0.1.0 (/build/source/crates/gammaloop-api)
  359. 38.74 s [gammaloop-workspace-clippy] Checking itertools v0.13.0
  360. 38.88 s [gammaloop-workspace-clippy] Compiling numerica v2.2.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  361. 39.08 s [gammaloop-workspace-clippy] Checking strum v0.26.3
  362. 39.16 s [gammaloop-workspace-clippy] Checking sysinfo v0.33.1
  363. 39.26 s [gammaloop-workspace-clippy] Checking ratatui-macros v0.7.0
  364. 39.26 s [gammaloop-workspace-clippy] Checking shlex v1.3.0
  365. 39.36 s [gammaloop-workspace-clippy] Checking ratatui v0.30.0
  366. 39.44 s [gammaloop-workspace-clippy] Checking futures-core v0.3.32
  367. 39.46 s [gammaloop-workspace-clippy] Checking clap_complete_nushell v4.6.0
  368. 39.52 s [gammaloop-workspace-clippy] Checking futures-task v0.3.32
  369. 39.65 s [gammaloop-workspace-clippy] Checking slab v0.4.12
  370. 39.67 s [gammaloop-workspace-clippy] Checking sdd v3.0.10
  371. 39.74 s [gammaloop-workspace-clippy] Compiling gammaloop-integration-tests v0.1.0 (/build/source/tests)
  372. 39.78 s [gammaloop-workspace-clippy] Compiling test-log-core v0.2.20
  373. 39.81 s [gammaloop-workspace-clippy] Checking futures-util v0.3.32
  374. 39.92 s [gammaloop-workspace-clippy] Checking scc v2.4.0
  375. 40.01 s [gammaloop-workspace-clippy] Compiling rustc_version v0.4.1
  376. 40.23 s [gammaloop-workspace-clippy] Checking backtrace v0.3.76
  377. 40.53 s [gammaloop-workspace-clippy] Checking which v8.0.2
  378. 40.84 s [gammaloop-workspace-clippy] Checking bincode v1.3.3
  379. 40.85 s [gammaloop-workspace-clippy] Checking color-eyre v0.6.5
  380. 40.89 s [gammaloop-workspace-clippy] Compiling gungraun-runner v0.18.2
  381. 41.07 s [gammaloop-workspace-clippy] Checking reedline v0.42.0
  382. 41.48 s [gammaloop-workspace-clippy] Checking proc-macro2 v1.0.106
  383. 41.59 s [gammaloop-workspace-clippy] Compiling gungraun-macros v0.8.0
  384. 41.63 s [gammaloop-workspace-clippy] Checking maplit v1.0.2
  385. 41.65 s [gammaloop-workspace-clippy] Checking base64 v0.21.7
  386. 41.67 s [gammaloop-workspace-clippy] Checking nalgebra v0.29.0
  387. 41.73 s [gammaloop-workspace-clippy] Compiling iai-callgrind-runner v0.14.2
  388. 42.01 s [gammaloop-workspace-clippy] Checking ron v0.8.1
  389. 42.13 s [gammaloop-workspace-clippy] Checking quote v1.0.45
  390. 42.21 s [gammaloop-workspace-clippy] Checking kurbo v0.13.0
  391. 42.33 s [gammaloop-workspace-clippy] Checking wait-timeout v0.2.1
  392. 42.44 s [gammaloop-workspace-clippy] Checking futures-executor v0.3.32
  393. 42.51 s [gammaloop-workspace-clippy] Checking quick-error v1.2.3
  394. 42.53 s [gammaloop-workspace-clippy] Checking serial_test v3.4.0
  395. 42.54 s [gammaloop-workspace-clippy] Compiling test-log-macros v0.2.20
  396. 42.57 s [gammaloop-workspace-clippy] Compiling iai-callgrind v0.14.2
  397. 42.67 s [gammaloop-workspace-clippy] Checking bit-vec v0.8.0
  398. 42.69 s [gammaloop-workspace-clippy] Checking rusty-fork v0.3.1
  399. 42.70 s [gammaloop-workspace-clippy] Checking syn v2.0.117
  400. 42.81 s [gammaloop-workspace-clippy] Checking bit-set v0.8.0
  401. 42.90 s [gammaloop-workspace-clippy] Compiling iai-callgrind-macros v0.5.1
  402. 42.91 s [gammaloop-workspace-clippy] Checking rand_xorshift v0.4.0
  403. 42.92 s [gammaloop-workspace-clippy] Checking console v0.15.11
  404. 43.02 s [gammaloop-workspace-clippy] Checking unarray v0.1.4
  405. 43.12 s [gammaloop-workspace-clippy] Checking pathdiff v0.2.3
  406. 43.15 s [gammaloop-workspace-clippy] Checking proptest v1.11.0
  407. 43.26 s [gammaloop-workspace-clippy] Checking similar-asserts v1.7.0
  408. 43.46 s [gammaloop-workspace-clippy] Checking kurvst v0.1.0 (/build/source/crates/kurvst)
  409. 43.74 s [gammaloop-workspace-clippy] Checking clinnet v0.1.8 (/build/source/crates/clinnet)
  410. 44.53 s [gammaloop-workspace-clippy] Compiling graphica v2.1.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  411. 45.44 s [gammaloop-workspace-clippy] Checking test-log v0.2.20
  412. 47.57 s [gammaloop-workspace-clippy] Checking statrs v0.16.1
  413. 48.36 s [gammaloop-workspace-clippy] Checking momtrop v0.3.0
  414. 50.98 s [gammaloop-workspace-clippy] Compiling pyo3-stub-gen-derive v0.17.2
  415. 51.05 s [gammaloop-workspace-clippy] Checking gungraun v0.18.2
  416. 51.59 s [gammaloop-workspace-clippy] Compiling pyo3-macros v0.28.3
  417. 57.66 s [gammaloop-workspace-clippy] Checking pyo3-stub-gen v0.17.2
  418. 67.74 s [gammaloop-workspace-clippy] Checking symbolica-utils v0.1.0 (/build/source/crates/symbolica-utils)
  419. 67.74 s [gammaloop-workspace-clippy] Checking spenso-macros v0.3.2 (/build/source/crates/spenso-macros)
  420. 318.47 s [gammaloop-workspace-clippy] Compiling gammaloop-workspace-hack v0.1.0 (/build/source/crates/gammaloop-workspace-hack)
  421. 318.75 s [gammaloop-workspace-clippy] Checking linnet v0.17.0 (/build/source/crates/linnet)
  422. 324.87 s [gammaloop-workspace-clippy] Checking spenso v0.6.0 (/build/source/crates/spenso)
  423. 324.87 s [gammaloop-workspace-clippy] Checking linnet-py v0.1.0 (/build/source/crates/linnet-py)
  424. 324.87 s [gammaloop-workspace-clippy] Checking linnest v0.1.0 (/build/source/crates/linnest)
  425. 333.00 s [gammaloop-workspace-clippy] Checking idenso v0.3.0 (/build/source/crates/idenso)
  426. 333.00 s [gammaloop-workspace-clippy] Checking gammaloop-tracing-filter v0.1.0 (/build/source/crates/gammaloop-tracing-filter)
  427. 335.72 s [gammaloop-workspace-clippy] Checking spenso-hep-lib v0.1.7 (/build/source/crates/spenso-hep-lib)
  428. 335.97 s [gammaloop-workspace-clippy] Checking spynso3 v0.1.2 (/build/source/crates/spynso3)
  429. 366.82 s [gammaloop-workspace-clippy] error: manual implementation of an assign operation
  430. 366.82 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/gammaloop_sample.rs:700:21
  431. 366.82 s [gammaloop-workspace-clippy] |
  432. 366.82 s [gammaloop-workspace-clippy] 700 | sample.sample.jacobian = sample.sample.jacobian * F::from_f64(partition_weight);
  433. 366.82 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace it with: `sample.sample.jacobian *= F::from_f64(partition_weight)`
  434. 366.82 s [gammaloop-workspace-clippy] |
  435. 366.82 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#assign_op_pattern
  436. 366.82 s [gammaloop-workspace-clippy] = note: `-D clippy::assign-op-pattern` implied by `-D warnings`
  437. 366.82 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::assign_op_pattern)]`
  438. 366.82 s [gammaloop-workspace-clippy]
  439. 366.97 s [gammaloop-workspace-clippy] error: doc list item without indentation
  440. 366.97 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:311:5
  441. 366.97 s [gammaloop-workspace-clippy] |
  442. 366.97 s [gammaloop-workspace-clippy] 311 | /// a selected LMB into a parent frame; graph code supplies the matrix and
  443. 366.97 s [gammaloop-workspace-clippy] | ^
  444. 366.97 s [gammaloop-workspace-clippy] |
  445. 366.97 s [gammaloop-workspace-clippy] = help: if this is supposed to be its own paragraph, add a blank line
  446. 366.97 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#doc_lazy_continuation
  447. 366.97 s [gammaloop-workspace-clippy] = note: `-D clippy::doc-lazy-continuation` implied by `-D warnings`
  448. 366.97 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::doc_lazy_continuation)]`
  449. 366.97 s [gammaloop-workspace-clippy] help: indent this line
  450. 366.97 s [gammaloop-workspace-clippy] |
  451. 366.97 s [gammaloop-workspace-clippy] 311 | /// a selected LMB into a parent frame; graph code supplies the matrix and
  452. 366.97 s [gammaloop-workspace-clippy] | ++
  453. 366.97 s [gammaloop-workspace-clippy]
  454. 366.97 s [gammaloop-workspace-clippy] error: doc list item without indentation
  455. 366.97 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:312:5
  456. 366.97 s [gammaloop-workspace-clippy] |
  457. 366.97 s [gammaloop-workspace-clippy] 312 | /// translation after resolving the relevant edge signatures and external data.
  458. 366.97 s [gammaloop-workspace-clippy] | ^
  459. 366.97 s [gammaloop-workspace-clippy] |
  460. 366.97 s [gammaloop-workspace-clippy] = help: if this is supposed to be its own paragraph, add a blank line
  461. 366.97 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#doc_lazy_continuation
  462. 366.97 s [gammaloop-workspace-clippy] help: indent this line
  463. 366.97 s [gammaloop-workspace-clippy] |
  464. 366.97 s [gammaloop-workspace-clippy] 312 | /// translation after resolving the relevant edge signatures and external data.
  465. 366.97 s [gammaloop-workspace-clippy] | ++
  466. 366.97 s [gammaloop-workspace-clippy]
  467. 366.98 s [gammaloop-workspace-clippy] error: the loop variable `column` is only used to index `augmented`
  468. 366.98 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:404:31
  469. 366.98 s [gammaloop-workspace-clippy] |
  470. 366.98 s [gammaloop-workspace-clippy] 404 | for column in 0..2 * dimension {
  471. 366.98 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^
  472. 366.98 s [gammaloop-workspace-clippy] |
  473. 366.98 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#needless_range_loop
  474. 366.98 s [gammaloop-workspace-clippy] = note: `-D clippy::needless-range-loop` implied by `-D warnings`
  475. 366.98 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::needless_range_loop)]`
  476. 366.98 s [gammaloop-workspace-clippy] help: consider using an iterator
  477. 366.98 s [gammaloop-workspace-clippy] |
  478. 366.98 s [gammaloop-workspace-clippy] 404 - for column in 0..2 * dimension {
  479. 366.98 s [gammaloop-workspace-clippy] 404 + for <item> in augmented.iter_mut().take(2 * dimension) {
  480. 366.98 s [gammaloop-workspace-clippy] |
  481. 366.98 s [gammaloop-workspace-clippy]
  482. 367.03 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  483. 367.03 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:1857:9
  484. 367.03 s [gammaloop-workspace-clippy] |
  485. 367.03 s [gammaloop-workspace-clippy] 1857 | / if let SamplingMapDefinition::Lmb(edges) = &definition {
  486. 367.03 s [gammaloop-workspace-clippy] 1858 | | if edges.len() != n_loop_momenta {
  487. 367.03 s [gammaloop-workspace-clippy] 1859 | | return Err(eyre!(
  488. 367.03 s [gammaloop-workspace-clippy] 1860 | | "lmb definition has {} edges, but the kernel has {} loop coordinates",
  489. 367.03 s [gammaloop-workspace-clippy] ... |
  490. 367.03 s [gammaloop-workspace-clippy] 1865 | | }
  491. 367.03 s [gammaloop-workspace-clippy] | |_________^
  492. 367.03 s [gammaloop-workspace-clippy] |
  493. 367.03 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  494. 367.03 s [gammaloop-workspace-clippy] = note: `-D clippy::collapsible-if` implied by `-D warnings`
  495. 367.03 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::collapsible_if)]`
  496. 367.03 s [gammaloop-workspace-clippy] help: collapse nested if block
  497. 367.03 s [gammaloop-workspace-clippy] |
  498. 367.03 s [gammaloop-workspace-clippy] 1857 ~ if let SamplingMapDefinition::Lmb(edges) = &definition
  499. 367.03 s [gammaloop-workspace-clippy] 1858 ~ && edges.len() != n_loop_momenta {
  500. 367.03 s [gammaloop-workspace-clippy] 1859 | return Err(eyre!(
  501. 367.03 s [gammaloop-workspace-clippy] ...
  502. 367.03 s [gammaloop-workspace-clippy] 1863 | ));
  503. 367.03 s [gammaloop-workspace-clippy] 1864 ~ }
  504. 367.03 s [gammaloop-workspace-clippy] |
  505. 367.03 s [gammaloop-workspace-clippy]
  506. 367.05 s [gammaloop-workspace-clippy] error: manual implementation of `.is_multiple_of()`
  507. 367.05 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_reference.rs:135:12
  508. 367.05 s [gammaloop-workspace-clippy] |
  509. 367.05 s [gammaloop-workspace-clippy] 135 | if center.len() % 3 != 0 {
  510. 367.05 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^ help: replace with: `!center.len().is_multiple_of(3)`
  511. 367.05 s [gammaloop-workspace-clippy] |
  512. 367.05 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#manual_is_multiple_of
  513. 367.05 s [gammaloop-workspace-clippy] = note: `-D clippy::manual-is-multiple-of` implied by `-D warnings`
  514. 367.05 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::manual_is_multiple_of)]`
  515. 367.05 s [gammaloop-workspace-clippy]
  516. 367.08 s [gammaloop-workspace-clippy] error: manual implementation of `.is_multiple_of()`
  517. 367.08 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:562:47
  518. 367.08 s [gammaloop-workspace-clippy] |
  519. 367.08 s [gammaloop-workspace-clippy] 562 | if self.raw_coordinates.is_empty() || self.raw_coordinates.len() % 3 != 0 {
  520. 367.08 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `!self.raw_coordinates.len().is_multiple_of(3)`
  521. 367.08 s [gammaloop-workspace-clippy] |
  522. 367.08 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#manual_is_multiple_of
  523. 367.08 s [gammaloop-workspace-clippy]
  524. 367.09 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  525. 367.09 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1018:5
  526. 367.09 s [gammaloop-workspace-clippy] |
  527. 367.09 s [gammaloop-workspace-clippy] 1018 | / if let Some(graph_id) = context.graph_id {
  528. 367.09 s [gammaloop-workspace-clippy] 1019 | | if graph_id != prepared.graph_id {
  529. 367.09 s [gammaloop-workspace-clippy] 1020 | | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  530. 367.09 s [gammaloop-workspace-clippy] 1021 | | channel: channel.to_owned(),
  531. 367.09 s [gammaloop-workspace-clippy] ... |
  532. 367.09 s [gammaloop-workspace-clippy] 1028 | | }
  533. 367.09 s [gammaloop-workspace-clippy] | |_____^
  534. 367.10 s [gammaloop-workspace-clippy] |
  535. 367.10 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  536. 367.10 s [gammaloop-workspace-clippy] help: collapse nested if block
  537. 367.10 s [gammaloop-workspace-clippy] |
  538. 367.10 s [gammaloop-workspace-clippy] 1018 ~ if let Some(graph_id) = context.graph_id
  539. 367.10 s [gammaloop-workspace-clippy] 1019 ~ && graph_id != prepared.graph_id {
  540. 367.10 s [gammaloop-workspace-clippy] 1020 | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  541. 367.10 s [gammaloop-workspace-clippy] ...
  542. 367.10 s [gammaloop-workspace-clippy] 1026 | });
  543. 367.10 s [gammaloop-workspace-clippy] 1027 ~ }
  544. 367.10 s [gammaloop-workspace-clippy] |
  545. 367.10 s [gammaloop-workspace-clippy]
  546. 367.10 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  547. 367.10 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1038:5
  548. 367.10 s [gammaloop-workspace-clippy] |
  549. 367.10 s [gammaloop-workspace-clippy] 1038 | / if let Some(cut_id) = context.cut_id {
  550. 367.10 s [gammaloop-workspace-clippy] 1039 | | if cut_id != prepared.cut_id {
  551. 367.10 s [gammaloop-workspace-clippy] 1040 | | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  552. 367.10 s [gammaloop-workspace-clippy] 1041 | | channel: channel.to_owned(),
  553. 367.10 s [gammaloop-workspace-clippy] ... |
  554. 367.10 s [gammaloop-workspace-clippy] 1048 | | }
  555. 367.10 s [gammaloop-workspace-clippy] | |_____^
  556. 367.10 s [gammaloop-workspace-clippy] |
  557. 367.10 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  558. 367.10 s [gammaloop-workspace-clippy] help: collapse nested if block
  559. 367.10 s [gammaloop-workspace-clippy] |
  560. 367.10 s [gammaloop-workspace-clippy] 1038 ~ if let Some(cut_id) = context.cut_id
  561. 367.10 s [gammaloop-workspace-clippy] 1039 ~ && cut_id != prepared.cut_id {
  562. 367.10 s [gammaloop-workspace-clippy] 1040 | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  563. 367.10 s [gammaloop-workspace-clippy] ...
  564. 367.10 s [gammaloop-workspace-clippy] 1046 | });
  565. 367.10 s [gammaloop-workspace-clippy] 1047 ~ }
  566. 367.10 s [gammaloop-workspace-clippy] |
  567. 367.10 s [gammaloop-workspace-clippy]
  568. 367.11 s [gammaloop-workspace-clippy] error: very complex type used. Consider factoring parts into `type` definitions
  569. 367.11 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1347:6
  570. 367.11 s [gammaloop-workspace-clippy] |
  571. 367.11 s [gammaloop-workspace-clippy] 1347 | ) -> Result<
  572. 367.11 s [gammaloop-workspace-clippy] | ______^
  573. 367.11 s [gammaloop-workspace-clippy] 1348 | | (
  574. 367.11 s [gammaloop-workspace-clippy] 1349 | | Vec<Box<dyn SamplingMapComponent>>,
  575. 367.11 s [gammaloop-workspace-clippy] 1350 | | Vec<Vec<usize>>,
  576. 367.11 s [gammaloop-workspace-clippy] ... |
  577. 367.11 s [gammaloop-workspace-clippy] 1353 | | SamplingChannelCompileError,
  578. 367.11 s [gammaloop-workspace-clippy] 1354 | | > {
  579. 367.11 s [gammaloop-workspace-clippy] | |_^
  580. 367.11 s [gammaloop-workspace-clippy] |
  581. 367.11 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#type_complexity
  582. 367.11 s [gammaloop-workspace-clippy] = note: `-D clippy::type-complexity` implied by `-D warnings`
  583. 367.11 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::type_complexity)]`
  584. 367.11 s [gammaloop-workspace-clippy]
  585. 367.13 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  586. 367.13 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1962:13
  587. 367.13 s [gammaloop-workspace-clippy] |
  588. 367.13 s [gammaloop-workspace-clippy] 1962 | / if let SamplingChannelSelector::Named(name) = selector {
  589. 367.13 s [gammaloop-workspace-clippy] 1963 | | if let Some(channel) = resolved.named(name) {
  590. 367.13 s [gammaloop-workspace-clippy] 1964 | | let entry = SamplingCatalogueEntry::Named(channel.clone());
  591. 367.13 s [gammaloop-workspace-clippy] 1965 | | if !entries.contains(&entry) {
  592. 367.13 s [gammaloop-workspace-clippy] ... |
  593. 367.13 s [gammaloop-workspace-clippy] 1969 | | }
  594. 367.13 s [gammaloop-workspace-clippy] | |_____________^
  595. 367.13 s [gammaloop-workspace-clippy] |
  596. 367.13 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  597. 367.13 s [gammaloop-workspace-clippy] help: collapse nested if block
  598. 367.13 s [gammaloop-workspace-clippy] |
  599. 367.13 s [gammaloop-workspace-clippy] 1962 ~ if let SamplingChannelSelector::Named(name) = selector
  600. 367.13 s [gammaloop-workspace-clippy] 1963 ~ && let Some(channel) = resolved.named(name) {
  601. 367.13 s [gammaloop-workspace-clippy] 1964 | let entry = SamplingCatalogueEntry::Named(channel.clone());
  602. 367.13 s [gammaloop-workspace-clippy] ...
  603. 367.13 s [gammaloop-workspace-clippy] 1967 | }
  604. 367.13 s [gammaloop-workspace-clippy] 1968 ~ }
  605. 367.13 s [gammaloop-workspace-clippy] |
  606. 367.13 s [gammaloop-workspace-clippy]
  607. 367.26 s [gammaloop-workspace-clippy] error: using `clone` on type `Complex<F<f64>>` which implements the `Copy` trait
  608. 367.26 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:160:32
  609. 367.26 s [gammaloop-workspace-clippy] |
  610. 367.26 s [gammaloop-workspace-clippy] 160 | value: value.values[0].clone(),
  611. 367.26 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `value.values[0]`
  612. 367.26 s [gammaloop-workspace-clippy] |
  613. 367.26 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  614. 367.26 s [gammaloop-workspace-clippy] = note: `-D clippy::clone-on-copy` implied by `-D warnings`
  615. 367.26 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::clone_on_copy)]`
  616. 367.26 s [gammaloop-workspace-clippy]
  617. 367.27 s [gammaloop-workspace-clippy] error: the loop variable `column` is only used to index `work`
  618. 367.27 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:324:27
  619. 367.27 s [gammaloop-workspace-clippy] |
  620. 367.27 s [gammaloop-workspace-clippy] 324 | for column in (pivot + 1)..dimension {
  621. 367.27 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^
  622. 367.27 s [gammaloop-workspace-clippy] |
  623. 367.27 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#needless_range_loop
  624. 367.27 s [gammaloop-workspace-clippy] help: consider using an iterator
  625. 367.27 s [gammaloop-workspace-clippy] |
  626. 367.27 s [gammaloop-workspace-clippy] 324 - for column in (pivot + 1)..dimension {
  627. 367.27 s [gammaloop-workspace-clippy] 324 + for <item> in work.iter_mut().take(dimension).skip((pivot + 1)) {
  628. 367.27 s [gammaloop-workspace-clippy] |
  629. 367.27 s [gammaloop-workspace-clippy]
  630. 370.59 s [gammaloop-workspace-clippy] error: this `impl` can be derived
  631. 370.59 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/settings/runtime.rs:1259:1
  632. 370.59 s [gammaloop-workspace-clippy] |
  633. 370.59 s [gammaloop-workspace-clippy] 1259 | / impl Default for SamplingChannelDefinition {
  634. 370.59 s [gammaloop-workspace-clippy] 1260 | | fn default() -> Self {
  635. 370.59 s [gammaloop-workspace-clippy] 1261 | | Self {
  636. 370.59 s [gammaloop-workspace-clippy] 1262 | | around: String::new(),
  637. 370.59 s [gammaloop-workspace-clippy] ... |
  638. 370.59 s [gammaloop-workspace-clippy] 1268 | | }
  639. 370.59 s [gammaloop-workspace-clippy] | |_^
  640. 370.59 s [gammaloop-workspace-clippy] |
  641. 370.59 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#derivable_impls
  642. 370.59 s [gammaloop-workspace-clippy] = note: `-D clippy::derivable-impls` implied by `-D warnings`
  643. 370.59 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::derivable_impls)]`
  644. 370.59 s [gammaloop-workspace-clippy] help: replace the manual implementation with a derive attribute
  645. 370.59 s [gammaloop-workspace-clippy] |
  646. 370.59 s [gammaloop-workspace-clippy] 1249 + #[derive(Default)]
  647. 370.59 s [gammaloop-workspace-clippy] 1250 | pub struct SamplingChannelDefinition {
  648. 370.59 s [gammaloop-workspace-clippy] |
  649. 370.59 s [gammaloop-workspace-clippy]
  650. 370.60 s [gammaloop-workspace-clippy] error: this `impl` can be derived
  651. 370.60 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/settings/runtime.rs:1285:1
  652. 370.60 s [gammaloop-workspace-clippy] |
  653. 370.60 s [gammaloop-workspace-clippy] 1285 | / impl Default for SamplingChannelSelection {
  654. 370.60 s [gammaloop-workspace-clippy] 1286 | | fn default() -> Self {
  655. 370.60 s [gammaloop-workspace-clippy] 1287 | | Self {
  656. 370.60 s [gammaloop-workspace-clippy] 1288 | | weight: SamplingChannelWeight::default(),
  657. 370.60 s [gammaloop-workspace-clippy] ... |
  658. 370.60 s [gammaloop-workspace-clippy] 1294 | | }
  659. 370.60 s [gammaloop-workspace-clippy] | |_^
  660. 370.60 s [gammaloop-workspace-clippy] |
  661. 370.60 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#derivable_impls
  662. 370.60 s [gammaloop-workspace-clippy] help: replace the manual implementation with a derive attribute
  663. 370.60 s [gammaloop-workspace-clippy] |
  664. 370.60 s [gammaloop-workspace-clippy] 1277 + #[derive(Default)]
  665. 370.60 s [gammaloop-workspace-clippy] 1278 | pub struct SamplingChannelSelection {
  666. 370.60 s [gammaloop-workspace-clippy] |
  667. 370.60 s [gammaloop-workspace-clippy]
  668. 373.20 s [gammaloop-workspace-clippy] error: could not compile `gammalooprs` (lib) due to 15 previous errors
  669. 373.20 s [gammaloop-workspace-clippy] warning: build failed, waiting for other jobs to finish...
  670. 376.31 s [gammaloop-workspace-clippy] error: using `clone` on type `F<f64>` which implements the `Copy` trait
  671. 376.31 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:2300:14
  672. 376.31 s [gammaloop-workspace-clippy] |
  673. 376.31 s [gammaloop-workspace-clippy] 2300 | (point.jacobian.clone() * point.inverse_jacobian.clone() - F(1.0)).abs() < F(1.0e-12)
  674. 376.31 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `point.jacobian`
  675. 376.31 s [gammaloop-workspace-clippy] |
  676. 376.31 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  677. 376.31 s [gammaloop-workspace-clippy] = note: `-D clippy::clone-on-copy` implied by `-D warnings`
  678. 376.31 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::clone_on_copy)]`
  679. 376.31 s [gammaloop-workspace-clippy]
  680. 376.31 s [gammaloop-workspace-clippy] error: using `clone` on type `F<f64>` which implements the `Copy` trait
  681. 376.31 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:2300:39
  682. 376.31 s [gammaloop-workspace-clippy] |
  683. 376.31 s [gammaloop-workspace-clippy] 2300 | (point.jacobian.clone() * point.inverse_jacobian.clone() - F(1.0)).abs() < F(1.0e-12)
  684. 376.31 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `point.inverse_jacobian`
  685. 376.31 s [gammaloop-workspace-clippy] |
  686. 376.31 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  687. 376.31 s [gammaloop-workspace-clippy]
  688. 376.49 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  689. 376.49 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2428:9
  690. 376.49 s [gammaloop-workspace-clippy] |
  691. 376.49 s [gammaloop-workspace-clippy] 2428 | selection.default_channel_selection = vec!["missing".into()];
  692. 376.50 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  693. 376.50 s [gammaloop-workspace-clippy] |
  694. 376.50 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["missing".into()], ..Default::default() }` and removing relevant reassignments
  695. 376.50 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2427:9
  696. 376.50 s [gammaloop-workspace-clippy] |
  697. 376.50 s [gammaloop-workspace-clippy] 2427 | let mut selection = SamplingChannelSelection::default();
  698. 376.50 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  699. 376.50 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  700. 376.50 s [gammaloop-workspace-clippy] = note: `-D clippy::field-reassign-with-default` implied by `-D warnings`
  701. 376.50 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::field_reassign_with_default)]`
  702. 376.50 s [gammaloop-workspace-clippy]
  703. 376.50 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  704. 376.50 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2448:9
  705. 376.50 s [gammaloop-workspace-clippy] |
  706. 376.50 s [gammaloop-workspace-clippy] 2448 | selection.default_channel_selection = vec!["named".into()];
  707. 376.50 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  708. 376.50 s [gammaloop-workspace-clippy] |
  709. 376.50 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["named".into()], ..Default::default() }` and removing relevant reassignments
  710. 376.50 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2447:9
  711. 376.50 s [gammaloop-workspace-clippy] |
  712. 376.50 s [gammaloop-workspace-clippy] 2447 | let mut selection = SamplingChannelSelection::default();
  713. 376.50 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  714. 376.50 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  715. 376.50 s [gammaloop-workspace-clippy]
  716. 376.50 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  717. 376.50 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2471:9
  718. 376.50 s [gammaloop-workspace-clippy] |
  719. 376.50 s [gammaloop-workspace-clippy] 2471 | selection.default_channel_selection = vec!["threshold".into()];
  720. 376.50 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  721. 376.50 s [gammaloop-workspace-clippy] |
  722. 376.50 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  723. 376.50 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2470:9
  724. 376.50 s [gammaloop-workspace-clippy] |
  725. 376.50 s [gammaloop-workspace-clippy] 2470 | let mut selection = SamplingChannelSelection::default();
  726. 376.50 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  727. 376.50 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  728. 376.50 s [gammaloop-workspace-clippy]
  729. 376.50 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  730. 376.50 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2523:9
  731. 376.50 s [gammaloop-workspace-clippy] |
  732. 376.50 s [gammaloop-workspace-clippy] 2523 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  733. 376.50 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  734. 376.50 s [gammaloop-workspace-clippy] |
  735. 376.50 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  736. 376.50 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2522:9
  737. 376.50 s [gammaloop-workspace-clippy] |
  738. 376.50 s [gammaloop-workspace-clippy] 2522 | let mut selection = SamplingChannelSelection::default();
  739. 376.50 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  740. 376.50 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  741. 376.50 s [gammaloop-workspace-clippy]
  742. 376.51 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  743. 376.51 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2540:9
  744. 376.51 s [gammaloop-workspace-clippy] |
  745. 376.51 s [gammaloop-workspace-clippy] 2540 | selection.default_channel_selection = vec!["auto:surfaces".into(), "auto:lmb".into()];
  746. 376.51 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  747. 376.51 s [gammaloop-workspace-clippy] |
  748. 376.51 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:surfaces".into(), "auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  749. 376.51 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2539:9
  750. 376.51 s [gammaloop-workspace-clippy] |
  751. 376.51 s [gammaloop-workspace-clippy] 2539 | let mut selection = SamplingChannelSelection::default();
  752. 376.51 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  753. 376.51 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  754. 376.51 s [gammaloop-workspace-clippy]
  755. 376.51 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  756. 376.51 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2550:9
  757. 376.51 s [gammaloop-workspace-clippy] |
  758. 376.51 s [gammaloop-workspace-clippy] 2550 | selection.default_channel_selection = vec!["auto:surfaces".into()];
  759. 376.51 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  760. 376.51 s [gammaloop-workspace-clippy] |
  761. 376.51 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:surfaces".into()], ..Default::default() }` and removing relevant reassignments
  762. 376.51 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2549:9
  763. 376.51 s [gammaloop-workspace-clippy] |
  764. 376.51 s [gammaloop-workspace-clippy] 2549 | let mut selection = SamplingChannelSelection::default();
  765. 376.51 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  766. 376.51 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  767. 376.51 s [gammaloop-workspace-clippy]
  768. 376.51 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  769. 376.51 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2627:13
  770. 376.51 s [gammaloop-workspace-clippy] |
  771. 376.51 s [gammaloop-workspace-clippy] 2627 | selection.default_channel_selection = vec![name.to_owned()];
  772. 376.51 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  773. 376.51 s [gammaloop-workspace-clippy] |
  774. 376.51 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec![name.to_owned()], ..Default::default() }` and removing relevant reassignments
  775. 376.51 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2626:13
  776. 376.51 s [gammaloop-workspace-clippy] |
  777. 376.51 s [gammaloop-workspace-clippy] 2626 | let mut selection = SamplingChannelSelection::default();
  778. 376.51 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  779. 376.51 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  780. 376.51 s [gammaloop-workspace-clippy]
  781. 376.52 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  782. 376.52 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2661:9
  783. 376.52 s [gammaloop-workspace-clippy] |
  784. 376.52 s [gammaloop-workspace-clippy] 2661 | selection.default_channel_selection = vec!["threshold".into()];
  785. 376.52 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  786. 376.52 s [gammaloop-workspace-clippy] |
  787. 376.52 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  788. 376.52 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2660:9
  789. 376.52 s [gammaloop-workspace-clippy] |
  790. 376.52 s [gammaloop-workspace-clippy] 2660 | let mut selection = SamplingChannelSelection::default();
  791. 376.52 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  792. 376.52 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  793. 376.52 s [gammaloop-workspace-clippy]
  794. 376.52 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  795. 376.52 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2706:9
  796. 376.52 s [gammaloop-workspace-clippy] |
  797. 376.52 s [gammaloop-workspace-clippy] 2706 | selection.default_channel_selection = vec!["conditional".into()];
  798. 376.52 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  799. 376.52 s [gammaloop-workspace-clippy] |
  800. 376.52 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["conditional".into()], ..Default::default() }` and removing relevant reassignments
  801. 376.52 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2705:9
  802. 376.52 s [gammaloop-workspace-clippy] |
  803. 376.52 s [gammaloop-workspace-clippy] 2705 | let mut selection = SamplingChannelSelection::default();
  804. 376.52 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  805. 376.52 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  806. 376.52 s [gammaloop-workspace-clippy]
  807. 376.52 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  808. 376.52 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2768:9
  809. 376.52 s [gammaloop-workspace-clippy] |
  810. 376.52 s [gammaloop-workspace-clippy] 2768 | selection.default_channel_selection = vec!["h".into(), "z".into()];
  811. 376.52 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  812. 376.52 s [gammaloop-workspace-clippy] |
  813. 376.52 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["h".into(), "z".into()], ..Default::default() }` and removing relevant reassignments
  814. 376.52 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2767:9
  815. 376.52 s [gammaloop-workspace-clippy] |
  816. 376.52 s [gammaloop-workspace-clippy] 2767 | let mut selection = SamplingChannelSelection::default();
  817. 376.52 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  818. 376.52 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  819. 376.52 s [gammaloop-workspace-clippy]
  820. 376.53 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  821. 376.53 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2812:9
  822. 376.53 s [gammaloop-workspace-clippy] |
  823. 376.53 s [gammaloop-workspace-clippy] 2812 | selection.default_channel_selection = vec!["auto:lmb".into()];
  824. 376.53 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  825. 376.53 s [gammaloop-workspace-clippy] |
  826. 376.53 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  827. 376.53 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2811:9
  828. 376.53 s [gammaloop-workspace-clippy] |
  829. 376.53 s [gammaloop-workspace-clippy] 2811 | let mut selection = SamplingChannelSelection::default();
  830. 376.53 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  831. 376.53 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  832. 376.53 s [gammaloop-workspace-clippy]
  833. 376.53 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  834. 376.53 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2834:9
  835. 376.53 s [gammaloop-workspace-clippy] |
  836. 376.53 s [gammaloop-workspace-clippy] 2834 | selection.default_channel_selection = vec!["auto:lmb".into()];
  837. 376.53 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  838. 376.53 s [gammaloop-workspace-clippy] |
  839. 376.53 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  840. 376.53 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2833:9
  841. 376.53 s [gammaloop-workspace-clippy] |
  842. 376.53 s [gammaloop-workspace-clippy] 2833 | let mut selection = SamplingChannelSelection::default();
  843. 376.53 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  844. 376.53 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  845. 376.53 s [gammaloop-workspace-clippy]
  846. 376.53 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  847. 376.53 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2886:9
  848. 376.53 s [gammaloop-workspace-clippy] |
  849. 376.53 s [gammaloop-workspace-clippy] 2886 | selection.default_channel_selection = vec!["named".into()];
  850. 376.53 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  851. 376.53 s [gammaloop-workspace-clippy] |
  852. 376.53 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["named".into()], ..Default::default() }` and removing relevant reassignments
  853. 376.53 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2885:9
  854. 376.53 s [gammaloop-workspace-clippy] |
  855. 376.53 s [gammaloop-workspace-clippy] 2885 | let mut selection = SamplingChannelSelection::default();
  856. 376.54 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  857. 376.54 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  858. 376.54 s [gammaloop-workspace-clippy]
  859. 376.54 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  860. 376.54 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2935:9
  861. 376.54 s [gammaloop-workspace-clippy] |
  862. 376.54 s [gammaloop-workspace-clippy] 2935 | selection.default_channel_selection = vec!["threshold".into()];
  863. 376.54 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  864. 376.54 s [gammaloop-workspace-clippy] |
  865. 376.54 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  866. 376.54 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2934:9
  867. 376.54 s [gammaloop-workspace-clippy] |
  868. 376.54 s [gammaloop-workspace-clippy] 2934 | let mut selection = SamplingChannelSelection::default();
  869. 376.54 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  870. 376.54 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  871. 376.54 s [gammaloop-workspace-clippy]
  872. 376.54 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  873. 376.54 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2982:9
  874. 376.54 s [gammaloop-workspace-clippy] |
  875. 376.54 s [gammaloop-workspace-clippy] 2982 | selection.default_channel_selection = vec!["cut_channel".into()];
  876. 376.54 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  877. 376.54 s [gammaloop-workspace-clippy] |
  878. 376.54 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_channel".into()], ..Default::default() }` and removing relevant reassignments
  879. 376.54 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2981:9
  880. 376.54 s [gammaloop-workspace-clippy] |
  881. 376.54 s [gammaloop-workspace-clippy] 2981 | let mut selection = SamplingChannelSelection::default();
  882. 376.54 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  883. 376.54 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  884. 376.54 s [gammaloop-workspace-clippy]
  885. 376.54 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  886. 376.54 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3012:9
  887. 376.54 s [gammaloop-workspace-clippy] |
  888. 376.54 s [gammaloop-workspace-clippy] 3012 | selection.default_channel_selection = vec!["right_channel".into()];
  889. 376.54 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  890. 376.54 s [gammaloop-workspace-clippy] |
  891. 376.54 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["right_channel".into()], ..Default::default() }` and removing relevant reassignments
  892. 376.54 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3011:9
  893. 376.54 s [gammaloop-workspace-clippy] |
  894. 376.54 s [gammaloop-workspace-clippy] 3011 | let mut selection = SamplingChannelSelection::default();
  895. 376.54 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  896. 376.54 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  897. 376.54 s [gammaloop-workspace-clippy]
  898. 376.54 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  899. 376.54 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3039:9
  900. 376.54 s [gammaloop-workspace-clippy] |
  901. 376.54 s [gammaloop-workspace-clippy] 3039 | selection.default_channel_selection = vec!["cut_chart".into()];
  902. 376.54 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  903. 376.54 s [gammaloop-workspace-clippy] |
  904. 376.54 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_chart".into()], ..Default::default() }` and removing relevant reassignments
  905. 376.54 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3038:9
  906. 376.54 s [gammaloop-workspace-clippy] |
  907. 376.54 s [gammaloop-workspace-clippy] 3038 | let mut selection = SamplingChannelSelection::default();
  908. 376.54 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  909. 376.54 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  910. 376.54 s [gammaloop-workspace-clippy]
  911. 376.55 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  912. 376.55 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3065:9
  913. 376.55 s [gammaloop-workspace-clippy] |
  914. 376.55 s [gammaloop-workspace-clippy] 3065 | selection.default_channel_selection = vec!["cut_chart".into()];
  915. 376.55 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  916. 376.55 s [gammaloop-workspace-clippy] |
  917. 376.55 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_chart".into()], ..Default::default() }` and removing relevant reassignments
  918. 376.55 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3064:9
  919. 376.55 s [gammaloop-workspace-clippy] |
  920. 376.55 s [gammaloop-workspace-clippy] 3064 | let mut selection = SamplingChannelSelection::default();
  921. 376.55 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  922. 376.55 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  923. 376.55 s [gammaloop-workspace-clippy]
  924. 376.55 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  925. 376.55 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3114:9
  926. 376.55 s [gammaloop-workspace-clippy] |
  927. 376.55 s [gammaloop-workspace-clippy] 3114 | selection.default_channel_selection = vec!["left_target".into()];
  928. 376.55 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  929. 376.55 s [gammaloop-workspace-clippy] |
  930. 376.55 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["left_target".into()], ..Default::default() }` and removing relevant reassignments
  931. 376.55 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3113:9
  932. 376.55 s [gammaloop-workspace-clippy] |
  933. 376.55 s [gammaloop-workspace-clippy] 3113 | let mut selection = SamplingChannelSelection::default();
  934. 376.55 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  935. 376.55 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  936. 376.55 s [gammaloop-workspace-clippy]
  937. 376.55 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  938. 376.55 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3158:9
  939. 376.55 s [gammaloop-workspace-clippy] |
  940. 376.55 s [gammaloop-workspace-clippy] 3158 | selection.default_channel_selection = vec!["threshold".into()];
  941. 376.55 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  942. 376.55 s [gammaloop-workspace-clippy] |
  943. 376.55 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  944. 376.55 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3157:9
  945. 376.55 s [gammaloop-workspace-clippy] |
  946. 376.55 s [gammaloop-workspace-clippy] 3157 | let mut selection = SamplingChannelSelection::default();
  947. 376.55 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  948. 376.55 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  949. 376.55 s [gammaloop-workspace-clippy]
  950. 376.55 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  951. 376.55 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3182:9
  952. 376.55 s [gammaloop-workspace-clippy] |
  953. 376.55 s [gammaloop-workspace-clippy] 3182 | selection.default_channel_selection = vec!["joint".into()];
  954. 376.55 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  955. 376.55 s [gammaloop-workspace-clippy] |
  956. 376.55 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  957. 376.55 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3181:9
  958. 376.55 s [gammaloop-workspace-clippy] |
  959. 376.55 s [gammaloop-workspace-clippy] 3181 | let mut selection = SamplingChannelSelection::default();
  960. 376.55 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  961. 376.55 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  962. 376.55 s [gammaloop-workspace-clippy]
  963. 376.56 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  964. 376.56 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3215:9
  965. 376.56 s [gammaloop-workspace-clippy] |
  966. 376.56 s [gammaloop-workspace-clippy] 3215 | selection.default_channel_selection = vec!["joint".into()];
  967. 376.56 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  968. 376.56 s [gammaloop-workspace-clippy] |
  969. 376.56 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  970. 376.56 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3214:9
  971. 376.56 s [gammaloop-workspace-clippy] |
  972. 376.56 s [gammaloop-workspace-clippy] 3214 | let mut selection = SamplingChannelSelection::default();
  973. 376.56 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  974. 376.56 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  975. 376.56 s [gammaloop-workspace-clippy]
  976. 376.56 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  977. 376.56 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3272:9
  978. 376.56 s [gammaloop-workspace-clippy] |
  979. 376.56 s [gammaloop-workspace-clippy] 3272 | selection.default_channel_selection = vec!["joint".into()];
  980. 376.56 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  981. 376.56 s [gammaloop-workspace-clippy] |
  982. 376.56 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  983. 376.56 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3271:9
  984. 376.56 s [gammaloop-workspace-clippy] |
  985. 376.56 s [gammaloop-workspace-clippy] 3271 | let mut selection = SamplingChannelSelection::default();
  986. 376.56 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  987. 376.56 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  988. 376.56 s [gammaloop-workspace-clippy]
  989. 376.56 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  990. 376.56 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3376:9
  991. 376.56 s [gammaloop-workspace-clippy] |
  992. 376.56 s [gammaloop-workspace-clippy] 3376 | selection.default_channel_selection = vec!["auto:lmb".into()];
  993. 376.56 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  994. 376.56 s [gammaloop-workspace-clippy] |
  995. 376.56 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  996. 376.56 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3375:9
  997. 376.56 s [gammaloop-workspace-clippy] |
  998. 376.56 s [gammaloop-workspace-clippy] 3375 | let mut selection = SamplingChannelSelection::default();
  999. 376.56 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1000. 376.56 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1001. 376.56 s [gammaloop-workspace-clippy]
  1002. 376.78 s [gammaloop-workspace-clippy] error: using `clone` on type `Complex<F<f64>>` which implements the `Copy` trait
  1003. 376.78 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:160:32
  1004. 376.78 s [gammaloop-workspace-clippy] |
  1005. 376.78 s [gammaloop-workspace-clippy] 160 | value: value.values[0].clone(),
  1006. 376.78 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `value.values[0]`
  1007. 376.78 s [gammaloop-workspace-clippy] |
  1008. 376.78 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  1009. 376.78 s [gammaloop-workspace-clippy]
  1010. 377.34 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1011. 377.34 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:5396:9
  1012. 377.34 s [gammaloop-workspace-clippy] |
  1013. 377.34 s [gammaloop-workspace-clippy] 5396 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  1014. 377.34 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1015. 377.34 s [gammaloop-workspace-clippy] |
  1016. 377.34 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  1017. 377.34 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:5395:9
  1018. 377.34 s [gammaloop-workspace-clippy] |
  1019. 377.34 s [gammaloop-workspace-clippy] 5395 | let mut selection = SamplingChannelSelection::default();
  1020. 377.34 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1021. 377.34 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1022. 377.34 s [gammaloop-workspace-clippy]
  1023. 377.34 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1024. 377.34 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:5399:9
  1025. 377.34 s [gammaloop-workspace-clippy] |
  1026. 377.34 s [gammaloop-workspace-clippy] 5399 | parameterization_settings.sampling_channels = selection;
  1027. 377.34 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1028. 377.34 s [gammaloop-workspace-clippy] |
  1029. 377.34 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::ParameterizationSettings { sampling_channels: selection, ..Default::default() }` and removing relevant reassignments
  1030. 377.34 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:5398:9
  1031. 377.34 s [gammaloop-workspace-clippy] |
  1032. 377.34 s [gammaloop-workspace-clippy] 5398 | let mut parameterization_settings = ParameterizationSettings::default();
  1033. 377.34 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1034. 377.34 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1035. 377.34 s [gammaloop-workspace-clippy]
  1036. 387.52 s [gammaloop-workspace-clippy] error: could not compile `gammalooprs` (lib test) due to 43 previous errors
  1037. 388.58 s Progress: 0 of 1 built (1 failed)
  1038. 388.58 s Failed to build gammaloop-workspace-clippy after 6m23s
  1039. 388.61 s Cannot build '/nix/store/chlmhmgq6rv00z64gh1dl1zxzvaxdj0f-gammaloop-workspace-clippy-0.1.0.drv'.
  1040. 388.61 s Reason: builder failed with exit code 101.
  1041. 388.61 s Output paths:
  1042. 388.61 s /nix/store/d71x0sslkrsh40bjkrk4xlkbncfrj32a-gammaloop-workspace-clippy-0.1.0
  1043. 388.61 s Last 1033 log lines:
  1044. 388.61 s > Running phase: unpackPhase
  1045. 388.61 s > unpacking source archive /nix/store/42m9v5ar5shnj6429lwrdlzclflxikj0-source
  1046. 388.61 s > source root is source
  1047. 388.61 s > Running phase: patchPhase
  1048. 388.61 s > Executing configureCargoCommonVars
  1049. 388.61 s > decompressing cargo artifacts from /nix/store/50vpxlcgfxf2d57i27v3d10zjwxxbm2r-gammaloop-workspace-deps-deps-0.1.0/target.tar.zst to target
  1050. 388.61 s > Running phase: updateAutotoolsGnuConfigScriptsPhase
  1051. 388.61 s > Running phase: configurePhase
  1052. 388.61 s > will append /build/source/.cargo-home/config.toml with contents of /nix/store/5drf77x6km4ky7gwlrzdx9bbd6fz09g3-vendor-cargo-deps/config.toml
  1053. 388.61 s > default configurePhase, nothing to do
  1054. 388.61 s > Running phase: buildPhase
  1055. 388.61 s > +++ command cargo --version
  1056. 388.61 s > cargo 1.97.0 (c980f4866 2026-06-30)
  1057. 388.61 s > +++ command cargo clippy --profile ci-optim --locked --workspace --features gammaloop-tracing-filter/clap,gammaloop-tracing-filter/symbolica,idenso/bincode,idenso/reference-cases,linnet/bincode,linnet/drawing,linnet/rkyv,linnet/serde,linnet/symbolica,spenso-macros/shadowing,spenso/shadowing,symbolica/tracing_max_level_info,three-dimensional-reps/display,three-dimensional-reps/eval,three-dimensional-reps/serde --all-targets --no-deps -- --deny warnings
  1058. 388.61 s > Checking cfg-if v1.0.4
  1059. 388.61 s > Checking memchr v2.8.0
  1060. 388.61 s > Checking once_cell v1.21.4
  1061. 388.61 s > Checking either v1.15.0
  1062. 388.61 s > Checking serde_core v1.0.228
  1063. 388.61 s > Checking libc v0.2.186
  1064. 388.61 s > Checking libm v0.2.16
  1065. 388.61 s > Checking itoa v1.0.18
  1066. 388.61 s > Checking log v0.4.29
  1067. 388.61 s > Checking regex-syntax v0.8.10
  1068. 388.61 s > Checking zerocopy v0.8.48
  1069. 388.61 s > Checking crossbeam-utils v0.8.21
  1070. 388.61 s > Checking equivalent v1.0.2
  1071. 388.61 s > Checking zmij v1.0.21
  1072. 388.61 s > Checking lazy_static v1.5.0
  1073. 388.61 s > Checking bytemuck v1.25.0
  1074. 388.61 s > Compiling target-lexicon v0.13.5
  1075. 388.61 s > Checking arrayvec v0.7.6
  1076. 388.61 s > Checking powerfmt v0.2.0
  1077. 388.61 s > Checking pin-project-lite v0.2.17
  1078. 388.61 s > Checking num_threads v0.1.7
  1079. 388.61 s > Checking num-conv v0.2.1
  1080. 388.61 s > Checking itertools v0.14.0
  1081. 388.61 s > Checking time-core v0.1.8
  1082. 388.61 s > Checking deranged v0.5.8
  1083. 388.61 s > Checking tracing-core v0.1.36
  1084. 388.61 s > Checking foldhash v0.2.0
  1085. 388.61 s > Checking allocator-api2 v0.2.21
  1086. 388.61 s > Checking const-random v0.1.18
  1087. 388.61 s > Checking safe_arch v0.7.4
  1088. 388.61 s > Checking static_assertions v1.1.0
  1089. 388.61 s > Checking winnow v1.0.2
  1090. 388.61 s > Checking nu-ansi-term v0.50.3
  1091. 388.61 s > Checking hashbrown v0.16.1
  1092. 388.61 s > Checking unty v0.0.4
  1093. 388.61 s > Checking safe_arch v1.0.0
  1094. 388.61 s > Checking sharded-slab v0.1.7
  1095. 388.61 s > Checking crossbeam-epoch v0.9.18
  1096. 388.61 s > Checking aho-corasick v1.1.4
  1097. 388.61 s > Checking tracing v0.1.44
  1098. 388.61 s > Checking wide v0.7.33
  1099. 388.61 s > Checking crossbeam-deque v0.8.6
  1100. 388.61 s > Checking tracing-log v0.2.0
  1101. 388.61 s > Checking thread_local v1.1.9
  1102. 388.61 s > Checking toml_writer v1.1.1+spec-1.1.0
  1103. 388.61 s > Checking az v1.3.0
  1104. 388.61 s > Checking indenter v0.3.4
  1105. 388.61 s > Checking wide v1.3.0
  1106. 388.61 s > Compiling phf_shared v0.11.3
  1107. 388.61 s > Checking anyhow v1.0.102
  1108. 388.61 s > Checking utf8parse v0.2.2
  1109. 388.61 s > Checking rayon-core v1.13.0
  1110. 388.61 s > Checking alloc-no-stdlib v2.0.4
  1111. 388.61 s > Checking rawpointer v0.2.1
  1112. 388.61 s > Checking dyn-clone v1.0.20
  1113. 388.61 s > Checking matrixmultiply v0.3.10
  1114. 388.61 s > Checking getrandom v0.3.4
  1115. 388.61 s > Checking time v0.3.47
  1116. 388.61 s > Checking gmp-mpfr-sys v1.7.1
  1117. 388.61 s > Checking alloc-stdlib v0.2.2
  1118. 388.61 s > Checking anstyle-parse v1.0.0
  1119. 388.61 s > Checking rand_core v0.9.5
  1120. 388.61 s > Checking rayon v1.12.0
  1121. 388.61 s > Checking colorchoice v1.0.5
  1122. 388.61 s > Checking colored v3.1.1
  1123. 388.61 s > Checking toml_parser v1.1.2+spec-1.1.0
  1124. 388.61 s > Checking anstyle-query v1.1.5
  1125. 388.61 s > Checking is_terminal_polyfill v1.70.2
  1126. 388.61 s > Checking num-traits v0.2.19
  1127. 388.61 s > Checking anstyle v1.0.14
  1128. 388.61 s > Compiling phf_generator v0.11.3
  1129. 388.61 s > Checking eyre v0.6.12
  1130. 388.61 s > Checking bitflags v1.3.2
  1131. 388.61 s > Checking unicode-width v0.2.2
  1132. 388.61 s > Checking region v3.0.2
  1133. 388.61 s > Checking anstream v1.0.0
  1134. 388.61 s > Compiling phf_codegen v0.11.3
  1135. 388.61 s > Checking brotli-decompressor v5.0.0
  1136. 388.61 s > Checking hugepage-rs v0.1.1
  1137. 388.61 s > Checking wasmtime-jit-icache-coherence v34.0.2
  1138. 388.61 s > Compiling pyo3-build-config v0.28.3
  1139. 388.61 s > Checking spec_math v0.1.6
  1140. 388.61 s > Checking inventory v0.3.24
  1141. 388.61 s > Checking thiserror v2.0.18
  1142. 388.61 s > Compiling getopts v0.2.24
  1143. 388.61 s > Checking libloading v0.9.0
  1144. 388.61 s > Checking bytes v1.11.1
  1145. 388.61 s > Checking byteorder v1.5.0
  1146. 388.61 s > Checking self_cell v1.2.2
  1147. 388.61 s > Checking tinyjson v2.5.1
  1148. 388.61 s > Checking append-only-vec v0.1.8
  1149. 388.61 s > Compiling unicode_names2_generator v1.3.0
  1150. 388.61 s > Checking linux-raw-sys v0.12.1
  1151. 388.61 s > Compiling unic-char-range v0.9.0
  1152. 388.61 s > Checking regex-automata v0.4.14
  1153. 388.61 s > Checking approx v0.5.1
  1154. 388.61 s > Checking num-integer v0.1.46
  1155. 388.61 s > Compiling unic-common v0.9.0
  1156. 388.61 s > Compiling unic-char-property v0.9.0
  1157. 388.61 s > Compiling is-macro v0.3.7
  1158. 388.61 s > Checking serde v1.0.228
  1159. 388.61 s > Checking serde_json v1.0.149
  1160. 388.61 s > Checking bitflags v2.11.1
  1161. 388.61 s > Checking serde_spanned v1.1.1
  1162. 388.61 s > Checking toml_datetime v1.1.1+spec-1.1.0
  1163. 388.61 s > Checking brotli v8.0.2
  1164. 388.61 s > Checking rustix v1.1.4
  1165. 388.61 s > Compiling unic-ucd-version v0.9.0
  1166. 388.61 s > Compiling rustpython-parser-vendored v0.4.0
  1167. 388.61 s > Checking iana-time-zone v0.1.65
  1168. 388.61 s > Checking toml v1.1.2+spec-1.1.0
  1169. 388.61 s > Checking smallvec v1.15.1
  1170. 388.61 s > Checking num-complex v0.4.6
  1171. 388.61 s > Checking bincode v2.0.1
  1172. 388.61 s > Checking tracing-serde v0.2.0
  1173. 388.61 s > Checking smartstring v1.0.1
  1174. 388.61 s > Checking chrono v0.4.44
  1175. 388.61 s > Compiling rustpython-parser v0.4.0
  1176. 388.61 s > Checking simba v0.9.1
  1177. 388.61 s > Compiling phf v0.11.3
  1178. 388.61 s > Checking rustc-hash v2.1.2
  1179. 388.61 s > Checking ndarray v0.17.2
  1180. 388.61 s > Compiling unic-emoji-char v0.9.0
  1181. 388.61 s > Compiling unic-ucd-ident v0.9.0
  1182. 388.61 s > Compiling lalrpop-util v0.20.2
  1183. 388.61 s > Compiling rustc-hash v1.1.0
  1184. 388.61 s > Checking rug v1.30.0
  1185. 388.61 s > Compiling symbolica v2.2.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  1186. 388.61 s > Checking unicode-segmentation v1.13.2
  1187. 388.61 s > Checking typenum v1.20.0
  1188. 388.61 s > Checking getrandom v0.2.17
  1189. 388.61 s > Checking ppv-lite86 v0.2.21
  1190. 388.61 s > Checking ahash v0.8.12
  1191. 388.61 s > Checking scopeguard v1.2.0
  1192. 388.61 s > Checking parking_lot_core v0.9.12
  1193. 388.61 s > Checking unicode-ident v1.0.24
  1194. 388.61 s > Checking hashbrown v0.17.0
  1195. 388.61 s > Checking lock_api v0.4.14
  1196. 388.61 s > Checking terminal_size v0.4.4
  1197. 388.61 s > Checking errno v0.3.14
  1198. 388.61 s > Checking rand_chacha v0.9.0
  1199. 388.61 s > Checking clap_lex v1.1.0
  1200. 388.61 s > Checking unicase v2.9.0
  1201. 388.61 s > Checking strsim v0.11.1
  1202. 388.61 s > Checking signal-hook-registry v1.4.8
  1203. 388.61 s > Checking rand v0.9.4
  1204. 388.61 s > Checking vte v0.14.1
  1205. 388.61 s > Checking parking_lot v0.12.5
  1206. 388.61 s > Checking clap_builder v4.6.0
  1207. 388.61 s > Checking generic-array v0.14.7
  1208. 388.61 s > Checking same-file v1.0.6
  1209. 388.61 s > Checking walkdir v2.5.0
  1210. 388.61 s > Checking signal-hook v0.3.18
  1211. 388.61 s > Checking half v2.7.1
  1212. 388.61 s > Checking indexmap v2.14.0
  1213. 388.61 s > Checking mio v1.2.0
  1214. 388.61 s > Checking symjit v2.21.0
  1215. 388.61 s > Checking ciborium-io v0.2.2
  1216. 388.61 s > Checking matchers v0.2.0
  1217. 388.61 s > Checking regex v1.12.3
  1218. 388.61 s > Checking minimal-lexical v0.2.1
  1219. 388.61 s > Checking tracing-subscriber v0.3.23
  1220. 388.61 s > Checking signal-hook-mio v0.2.5
  1221. 388.61 s > Checking nom v7.1.3
  1222. 388.61 s > Checking ciborium-ll v0.2.2
  1223. 388.61 s > Checking derive_more v2.1.1
  1224. 388.61 s > Checking num-bigint v0.4.6
  1225. 388.61 s > Checking crypto-common v0.1.7
  1226. 388.61 s > Checking block-buffer v0.10.4
  1227. 388.61 s > Checking console v0.16.3
  1228. 388.61 s > Checking bstr v1.12.1
  1229. 388.61 s > Checking digest v0.10.7
  1230. 388.61 s > Checking linux-raw-sys v0.4.15
  1231. 388.61 s > Checking cpufeatures v0.2.17
  1232. 388.61 s > Checking winnow v0.7.15
  1233. 388.61 s > Checking sha2 v0.10.9
  1234. 388.61 s > Compiling unicode_names2 v1.3.0
  1235. 388.61 s > Checking globset v0.4.18
  1236. 388.61 s > Checking clap v4.6.1
  1237. 388.61 s > Checking ciborium v0.2.2
  1238. 388.61 s > Checking getrandom v0.4.2
  1239. 388.61 s > Checking rustix v0.38.44
  1240. 388.61 s > Checking rand_core v0.6.4
  1241. 388.61 s > Checking fastrand v2.4.1
  1242. 388.61 s > Checking ansitok v0.3.0
  1243. 388.61 s > Checking fnv v1.0.7
  1244. 388.61 s > Checking plotters-backend v0.3.7
  1245. 388.61 s > Checking rust-embed-utils v8.11.0
  1246. 388.61 s > Checking serde_spanned v0.6.9
  1247. 388.61 s > Checking tempfile v3.27.0
  1248. 388.61 s > Checking toml_datetime v0.6.11
  1249. 388.61 s > Checking itertools v0.10.5
  1250. 388.61 s > Checking tap v1.0.1
  1251. 388.61 s > Checking crossterm v0.28.1
  1252. 388.61 s > Checking cast v0.3.0
  1253. 388.61 s > Checking toml_write v0.1.2
  1254. 388.61 s > Checking plotters-svg v0.3.7
  1255. 388.61 s > Checking wyz v0.5.1
  1256. 388.61 s > Checking rand_chacha v0.3.1
  1257. 388.61 s > Checking radium v0.7.0
  1258. 388.61 s > Checking ansi-str v0.9.0
  1259. 388.61 s > Checking typeid v1.0.3
  1260. 388.61 s > Checking plotters v0.3.7
  1261. 388.61 s > Checking similar v2.7.0
  1262. 388.61 s > Checking tinytemplate v1.2.1
  1263. 388.61 s > Checking is-terminal v0.4.17
  1264. 388.61 s > Checking bytecount v0.6.9
  1265. 388.61 s > Checking oorandom v11.1.5
  1266. 388.61 s > Checking funty v2.0.0
  1267. 388.61 s > Checking toml_edit v0.22.27
  1268. 388.61 s > Checking anes v0.1.6
  1269. 388.61 s > Checking papergrid v0.17.0
  1270. 388.61 s > Checking rand v0.8.6
  1271. 388.61 s > Checking ron v0.12.1
  1272. 388.61 s > Checking criterion-plot v0.5.0
  1273. 388.61 s > Checking testing_table v0.3.0
  1274. 388.61 s > Checking xprec v0.2.2
  1275. 388.61 s > Checking toml_edit v0.25.11+spec-1.1.0
  1276. 388.61 s > Checking env_filter v1.0.1
  1277. 388.61 s > Checking bitvec v1.0.1
  1278. 388.61 s > Checking uncased v0.9.10
  1279. 388.61 s > Checking jiff v0.2.24
  1280. 388.61 s > Checking ptr_meta v0.1.4
  1281. 388.61 s > Checking ucd-trie v0.1.7
  1282. 388.61 s > Checking simdutf8 v0.1.5
  1283. 388.61 s > Checking criterion v0.5.1
  1284. 388.61 s > Compiling pyo3-macros-backend v0.28.3
  1285. 388.61 s > Compiling pyo3-ffi v0.28.3
  1286. 388.61 s > Compiling pyo3 v0.28.3
  1287. 388.61 s > Compiling numpy v0.28.0
  1288. 388.61 s > Checking bytecheck v0.6.12
  1289. 388.61 s > Checking pest v2.8.6
  1290. 388.61 s > Checking ahash v0.7.8
  1291. 388.61 s > Checking tabled v0.20.0
  1292. 388.61 s > Checking approx v0.4.0
  1293. 388.61 s > Checking insta v1.47.2
  1294. 388.61 s > Checking seahash v4.1.0
  1295. 388.61 s > Checking hashbrown v0.12.3
  1296. 388.61 s > Checking cgmath v0.18.0
  1297. 388.61 s > Checking num-rational v0.4.2
  1298. 388.61 s > Checking rend v0.4.2
  1299. 388.61 s > Checking num-iter v0.1.45
  1300. 388.61 s > Checking toml v0.8.23
  1301. 388.61 s > Checking ref-ops v0.2.5
  1302. 388.61 s > Checking rand_xoshiro v0.6.0
  1303. 388.61 s > Checking num v0.4.3
  1304. 388.61 s > Checking features v0.10.0
  1305. 388.61 s > Checking constcat v0.5.1
  1306. 388.61 s > Checking gat-lending-iterator v0.1.8
  1307. 388.61 s > Checking colored v2.2.0
  1308. 388.61 s > Checking cpufeatures v0.3.0
  1309. 388.61 s > Checking constant_time_eq v0.4.2
  1310. 388.61 s > Checking arrayref v0.3.9
  1311. 388.61 s > Checking base64 v0.22.1
  1312. 388.61 s > Checking joinery v2.1.0
  1313. 388.61 s > Checking blake3 v1.8.5
  1314. 388.61 s > Checking dot-parser v0.5.1
  1315. 388.61 s > Checking figment v0.10.19
  1316. 388.61 s > Checking siphasher v1.0.2
  1317. 388.61 s > Checking titlecase v2.2.1
  1318. 388.61 s > Checking phf_shared v0.13.1
  1319. 388.61 s > Checking rust_lisp v0.18.0
  1320. 388.61 s > Checking subprocess v0.2.15
  1321. 388.61 s > Compiling vakint v0.1.2 (/build/source/crates/vakint)
  1322. 388.61 s > Checking version-compare v0.2.1
  1323. 388.61 s > Checking xpct v0.5.1
  1324. 388.61 s > Checking phf v0.13.1
  1325. 388.61 s > Checking ryu v1.0.23
  1326. 388.61 s > Compiling rustpython-parser-core v0.4.0
  1327. 388.61 s > Checking castaway v0.2.4
  1328. 388.61 s > Checking toml_datetime v0.7.5+spec-1.1.0
  1329. 388.61 s > Checking strum v0.27.2
  1330. 388.61 s > Checking unicode-truncate v2.0.1
  1331. 388.61 s > Checking kasuari v0.4.12
  1332. 388.61 s > Checking compact_str v0.9.0
  1333. 388.61 s > Checking lru v0.16.4
  1334. 388.61 s > Checking vte v0.15.0
  1335. 388.61 s > Checking portable-atomic v1.13.1
  1336. 388.61 s > Compiling rustpython-ast v0.4.0
  1337. 388.61 s > Checking vt100 v0.16.2
  1338. 388.61 s > Checking toml v0.9.12+spec-1.1.0
  1339. 388.61 s > Checking unit-prefix v0.5.2
  1340. 388.61 s > Checking rand_distr v0.4.3
  1341. 388.61 s > Checking simba v0.6.0
  1342. 388.61 s > Checking line-clipping v0.3.7
  1343. 388.61 s > Checking adler2 v2.0.1
  1344. 388.61 s > Checking string-template-plus v0.4.3
  1345. 388.61 s > Compiling three-dimensional-reps v0.1.0 (/build/source/crates/three-dimensional-reps)
  1346. 388.61 s > Checking gimli v0.32.3
  1347. 388.61 s > Checking miniz_oxide v0.8.9
  1348. 388.61 s > Checking thiserror v1.0.69
  1349. 388.61 s > Checking derive_builder v0.11.2
  1350. 388.61 s > Checking crossterm v0.29.0
  1351. 388.61 s > Checking object v0.37.3
  1352. 388.61 s > Checking owo-colors v4.3.0
  1353. 388.61 s > Checking tracing-error v0.2.1
  1354. 388.61 s > Checking typed-index-collections v3.5.0
  1355. 388.61 s > Checking ratatui-core v0.1.0
  1356. 388.61 s > Checking serde-big-array v0.5.1
  1357. 388.61 s > Checking amd v0.2.2
  1358. 388.61 s > Checking indicatif v0.18.4
  1359. 388.61 s > Checking itertools v0.11.0
  1360. 388.61 s > Compiling gammaloop-tracing-filter-macros v0.1.0 (/build/source/crates/gammaloop-tracing-filter-macros)
  1361. 388.61 s > Checking option-ext v0.2.0
  1362. 388.61 s > Checking rustc-demangle v0.1.27
  1363. 388.61 s > Checking dirs-sys v0.5.0
  1364. 388.61 s > Checking color-spantrace v0.3.0
  1365. 388.61 s > Checking ref-cast v1.0.25
  1366. 388.61 s > Checking nix v0.31.2
  1367. 388.61 s > Checking integer-sqrt v0.1.5
  1368. 388.61 s > Checking brotli-decompressor v4.0.3
  1369. 388.61 s > Checking crossbeam-channel v0.5.15
  1370. 388.61 s > Checking itertools v0.12.1
  1371. 388.61 s > Checking symlink v0.1.0
  1372. 388.61 s > Checking unsafe-libyaml v0.2.11
  1373. 388.61 s > Compiling gammalooprs v0.3.4 (/build/source/crates/gammalooprs)
  1374. 388.61 s > Checking ratatui-widgets v0.3.0
  1375. 388.61 s > Checking env_logger v0.11.10
  1376. 388.61 s > Checking ratatui-crossterm v0.1.0
  1377. 388.61 s > Checking tracing-appender v0.2.5
  1378. 388.61 s > Checking tracing-indicatif v0.3.14
  1379. 388.61 s > Checking ctrlc v3.5.2
  1380. 388.61 s > Checking include_dir v0.7.4
  1381. 388.61 s > Checking pathfinding v4.15.0
  1382. 388.61 s > Checking rkyv v0.7.46
  1383. 388.61 s > Checking schemars v1.2.1
  1384. 388.61 s > Checking dirs v6.0.0
  1385. 388.61 s > Checking slotmap v1.1.1
  1386. 388.61 s > Checking serde_yaml v0.9.34+deprecated
  1387. 388.61 s > Checking json5 v0.4.1
  1388. 388.61 s > Checking clarabel v0.11.1
  1389. 388.61 s > Checking vectorize v0.2.0
  1390. 388.61 s > Checking base62 v2.2.4
  1391. 388.61 s > Checking brotli v7.0.0
  1392. 388.61 s > Checking ringbuffer v0.16.0
  1393. 388.61 s > Checking rust-embed v8.11.0
  1394. 388.61 s > Checking addr2line v0.25.1
  1395. 388.61 s > Checking clap_complete v4.6.3
  1396. 388.61 s > Checking strip-ansi-escapes v0.2.1
  1397. 388.61 s > Checking fd-lock v4.0.4
  1398. 388.61 s > Compiling gammaloop-api v0.1.0 (/build/source/crates/gammaloop-api)
  1399. 388.61 s > Checking itertools v0.13.0
  1400. 388.61 s > Compiling numerica v2.2.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  1401. 388.61 s > Checking strum v0.26.3
  1402. 388.61 s > Checking sysinfo v0.33.1
  1403. 388.61 s > Checking ratatui-macros v0.7.0
  1404. 388.61 s > Checking shlex v1.3.0
  1405. 388.61 s > Checking ratatui v0.30.0
  1406. 388.61 s > Checking futures-core v0.3.32
  1407. 388.61 s > Checking clap_complete_nushell v4.6.0
  1408. 388.61 s > Checking futures-task v0.3.32
  1409. 388.61 s > Checking slab v0.4.12
  1410. 388.61 s > Checking sdd v3.0.10
  1411. 388.61 s > Compiling gammaloop-integration-tests v0.1.0 (/build/source/tests)
  1412. 388.61 s > Compiling test-log-core v0.2.20
  1413. 388.61 s > Checking futures-util v0.3.32
  1414. 388.61 s > Checking scc v2.4.0
  1415. 388.61 s > Compiling rustc_version v0.4.1
  1416. 388.61 s > Checking backtrace v0.3.76
  1417. 388.61 s > Checking which v8.0.2
  1418. 388.61 s > Checking bincode v1.3.3
  1419. 388.61 s > Checking color-eyre v0.6.5
  1420. 388.61 s > Compiling gungraun-runner v0.18.2
  1421. 388.61 s > Checking reedline v0.42.0
  1422. 388.61 s > Checking proc-macro2 v1.0.106
  1423. 388.61 s > Compiling gungraun-macros v0.8.0
  1424. 388.61 s > Checking maplit v1.0.2
  1425. 388.61 s > Checking base64 v0.21.7
  1426. 388.61 s > Checking nalgebra v0.29.0
  1427. 388.61 s > Compiling iai-callgrind-runner v0.14.2
  1428. 388.61 s > Checking ron v0.8.1
  1429. 388.61 s > Checking quote v1.0.45
  1430. 388.61 s > Checking kurbo v0.13.0
  1431. 388.61 s > Checking wait-timeout v0.2.1
  1432. 388.61 s > Checking futures-executor v0.3.32
  1433. 388.61 s > Checking quick-error v1.2.3
  1434. 388.61 s > Checking serial_test v3.4.0
  1435. 388.61 s > Compiling test-log-macros v0.2.20
  1436. 388.61 s > Compiling iai-callgrind v0.14.2
  1437. 388.61 s > Checking bit-vec v0.8.0
  1438. 388.61 s > Checking rusty-fork v0.3.1
  1439. 388.61 s > Checking syn v2.0.117
  1440. 388.61 s > Checking bit-set v0.8.0
  1441. 388.61 s > Compiling iai-callgrind-macros v0.5.1
  1442. 388.61 s > Checking rand_xorshift v0.4.0
  1443. 388.61 s > Checking console v0.15.11
  1444. 388.61 s > Checking unarray v0.1.4
  1445. 388.61 s > Checking pathdiff v0.2.3
  1446. 388.61 s > Checking proptest v1.11.0
  1447. 388.61 s > Checking similar-asserts v1.7.0
  1448. 388.61 s > Checking kurvst v0.1.0 (/build/source/crates/kurvst)
  1449. 388.61 s > Checking clinnet v0.1.8 (/build/source/crates/clinnet)
  1450. 388.61 s > Compiling graphica v2.1.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  1451. 388.61 s > Checking test-log v0.2.20
  1452. 388.61 s > Checking statrs v0.16.1
  1453. 388.61 s > Checking momtrop v0.3.0
  1454. 388.61 s > Compiling pyo3-stub-gen-derive v0.17.2
  1455. 388.61 s > Checking gungraun v0.18.2
  1456. 388.61 s > Compiling pyo3-macros v0.28.3
  1457. 388.61 s > Checking pyo3-stub-gen v0.17.2
  1458. 388.61 s > Checking symbolica-utils v0.1.0 (/build/source/crates/symbolica-utils)
  1459. 388.61 s > Checking spenso-macros v0.3.2 (/build/source/crates/spenso-macros)
  1460. 388.61 s > Compiling gammaloop-workspace-hack v0.1.0 (/build/source/crates/gammaloop-workspace-hack)
  1461. 388.61 s > Checking linnet v0.17.0 (/build/source/crates/linnet)
  1462. 388.61 s > Checking spenso v0.6.0 (/build/source/crates/spenso)
  1463. 388.61 s > Checking linnet-py v0.1.0 (/build/source/crates/linnet-py)
  1464. 388.61 s > Checking linnest v0.1.0 (/build/source/crates/linnest)
  1465. 388.61 s > Checking idenso v0.3.0 (/build/source/crates/idenso)
  1466. 388.61 s > Checking gammaloop-tracing-filter v0.1.0 (/build/source/crates/gammaloop-tracing-filter)
  1467. 388.61 s > Checking spenso-hep-lib v0.1.7 (/build/source/crates/spenso-hep-lib)
  1468. 388.61 s > Checking spynso3 v0.1.2 (/build/source/crates/spynso3)
  1469. 388.61 s > error: manual implementation of an assign operation
  1470. 388.61 s > --> crates/gammalooprs/src/integrands/process/gammaloop_sample.rs:700:21
  1471. 388.61 s > |
  1472. 388.61 s > 700 | sample.sample.jacobian = sample.sample.jacobian * F::from_f64(partition_weight);
  1473. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace it with: `sample.sample.jacobian *= F::from_f64(partition_weight)`
  1474. 388.61 s > |
  1475. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#assign_op_pattern
  1476. 388.61 s > = note: `-D clippy::assign-op-pattern` implied by `-D warnings`
  1477. 388.61 s > = help: to override `-D warnings` add `#[allow(clippy::assign_op_pattern)]`
  1478. 388.61 s >
  1479. 388.61 s > error: doc list item without indentation
  1480. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:311:5
  1481. 388.61 s > |
  1482. 388.61 s > 311 | /// a selected LMB into a parent frame; graph code supplies the matrix and
  1483. 388.61 s > | ^
  1484. 388.61 s > |
  1485. 388.61 s > = help: if this is supposed to be its own paragraph, add a blank line
  1486. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#doc_lazy_continuation
  1487. 388.61 s > = note: `-D clippy::doc-lazy-continuation` implied by `-D warnings`
  1488. 388.61 s > = help: to override `-D warnings` add `#[allow(clippy::doc_lazy_continuation)]`
  1489. 388.61 s > help: indent this line
  1490. 388.61 s > |
  1491. 388.61 s > 311 | /// a selected LMB into a parent frame; graph code supplies the matrix and
  1492. 388.61 s > | ++
  1493. 388.61 s >
  1494. 388.61 s > error: doc list item without indentation
  1495. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:312:5
  1496. 388.61 s > |
  1497. 388.61 s > 312 | /// translation after resolving the relevant edge signatures and external data.
  1498. 388.61 s > | ^
  1499. 388.61 s > |
  1500. 388.61 s > = help: if this is supposed to be its own paragraph, add a blank line
  1501. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#doc_lazy_continuation
  1502. 388.61 s > help: indent this line
  1503. 388.61 s > |
  1504. 388.61 s > 312 | /// translation after resolving the relevant edge signatures and external data.
  1505. 388.61 s > | ++
  1506. 388.61 s >
  1507. 388.61 s > error: the loop variable `column` is only used to index `augmented`
  1508. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:404:31
  1509. 388.61 s > |
  1510. 388.61 s > 404 | for column in 0..2 * dimension {
  1511. 388.61 s > | ^^^^^^^^^^^^^^^^
  1512. 388.61 s > |
  1513. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#needless_range_loop
  1514. 388.61 s > = note: `-D clippy::needless-range-loop` implied by `-D warnings`
  1515. 388.61 s > = help: to override `-D warnings` add `#[allow(clippy::needless_range_loop)]`
  1516. 388.61 s > help: consider using an iterator
  1517. 388.61 s > |
  1518. 388.61 s > 404 - for column in 0..2 * dimension {
  1519. 388.61 s > 404 + for <item> in augmented.iter_mut().take(2 * dimension) {
  1520. 388.61 s > |
  1521. 388.61 s >
  1522. 388.61 s > error: this `if` statement can be collapsed
  1523. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:1857:9
  1524. 388.61 s > |
  1525. 388.61 s > 1857 | / if let SamplingMapDefinition::Lmb(edges) = &definition {
  1526. 388.61 s > 1858 | | if edges.len() != n_loop_momenta {
  1527. 388.61 s > 1859 | | return Err(eyre!(
  1528. 388.61 s > 1860 | | "lmb definition has {} edges, but the kernel has {} loop coordinates",
  1529. 388.61 s > ... |
  1530. 388.61 s > 1865 | | }
  1531. 388.61 s > | |_________^
  1532. 388.61 s > |
  1533. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1534. 388.61 s > = note: `-D clippy::collapsible-if` implied by `-D warnings`
  1535. 388.61 s > = help: to override `-D warnings` add `#[allow(clippy::collapsible_if)]`
  1536. 388.61 s > help: collapse nested if block
  1537. 388.61 s > |
  1538. 388.61 s > 1857 ~ if let SamplingMapDefinition::Lmb(edges) = &definition
  1539. 388.61 s > 1858 ~ && edges.len() != n_loop_momenta {
  1540. 388.61 s > 1859 | return Err(eyre!(
  1541. 388.61 s > ...
  1542. 388.61 s > 1863 | ));
  1543. 388.61 s > 1864 ~ }
  1544. 388.61 s > |
  1545. 388.61 s >
  1546. 388.61 s > error: manual implementation of `.is_multiple_of()`
  1547. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_reference.rs:135:12
  1548. 388.61 s > |
  1549. 388.61 s > 135 | if center.len() % 3 != 0 {
  1550. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^ help: replace with: `!center.len().is_multiple_of(3)`
  1551. 388.61 s > |
  1552. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#manual_is_multiple_of
  1553. 388.61 s > = note: `-D clippy::manual-is-multiple-of` implied by `-D warnings`
  1554. 388.61 s > = help: to override `-D warnings` add `#[allow(clippy::manual_is_multiple_of)]`
  1555. 388.61 s >
  1556. 388.61 s > error: manual implementation of `.is_multiple_of()`
  1557. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:562:47
  1558. 388.61 s > |
  1559. 388.61 s > 562 | if self.raw_coordinates.is_empty() || self.raw_coordinates.len() % 3 != 0 {
  1560. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `!self.raw_coordinates.len().is_multiple_of(3)`
  1561. 388.61 s > |
  1562. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#manual_is_multiple_of
  1563. 388.61 s >
  1564. 388.61 s > error: this `if` statement can be collapsed
  1565. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1018:5
  1566. 388.61 s > |
  1567. 388.61 s > 1018 | / if let Some(graph_id) = context.graph_id {
  1568. 388.61 s > 1019 | | if graph_id != prepared.graph_id {
  1569. 388.61 s > 1020 | | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  1570. 388.61 s > 1021 | | channel: channel.to_owned(),
  1571. 388.61 s > ... |
  1572. 388.61 s > 1028 | | }
  1573. 388.61 s > | |_____^
  1574. 388.61 s > |
  1575. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1576. 388.61 s > help: collapse nested if block
  1577. 388.61 s > |
  1578. 388.61 s > 1018 ~ if let Some(graph_id) = context.graph_id
  1579. 388.61 s > 1019 ~ && graph_id != prepared.graph_id {
  1580. 388.61 s > 1020 | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  1581. 388.61 s > ...
  1582. 388.61 s > 1026 | });
  1583. 388.61 s > 1027 ~ }
  1584. 388.61 s > |
  1585. 388.61 s >
  1586. 388.61 s > error: this `if` statement can be collapsed
  1587. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1038:5
  1588. 388.61 s > |
  1589. 388.61 s > 1038 | / if let Some(cut_id) = context.cut_id {
  1590. 388.61 s > 1039 | | if cut_id != prepared.cut_id {
  1591. 388.61 s > 1040 | | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  1592. 388.61 s > 1041 | | channel: channel.to_owned(),
  1593. 388.61 s > ... |
  1594. 388.61 s > 1048 | | }
  1595. 388.61 s > | |_____^
  1596. 388.61 s > |
  1597. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1598. 388.61 s > help: collapse nested if block
  1599. 388.61 s > |
  1600. 388.61 s > 1038 ~ if let Some(cut_id) = context.cut_id
  1601. 388.61 s > 1039 ~ && cut_id != prepared.cut_id {
  1602. 388.61 s > 1040 | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  1603. 388.61 s > ...
  1604. 388.61 s > 1046 | });
  1605. 388.61 s > 1047 ~ }
  1606. 388.61 s > |
  1607. 388.61 s >
  1608. 388.61 s > error: very complex type used. Consider factoring parts into `type` definitions
  1609. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1347:6
  1610. 388.61 s > |
  1611. 388.61 s > 1347 | ) -> Result<
  1612. 388.61 s > | ______^
  1613. 388.61 s > 1348 | | (
  1614. 388.61 s > 1349 | | Vec<Box<dyn SamplingMapComponent>>,
  1615. 388.61 s > 1350 | | Vec<Vec<usize>>,
  1616. 388.61 s > ... |
  1617. 388.61 s > 1353 | | SamplingChannelCompileError,
  1618. 388.61 s > 1354 | | > {
  1619. 388.61 s > | |_^
  1620. 388.61 s > |
  1621. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#type_complexity
  1622. 388.61 s > = note: `-D clippy::type-complexity` implied by `-D warnings`
  1623. 388.61 s > = help: to override `-D warnings` add `#[allow(clippy::type_complexity)]`
  1624. 388.61 s >
  1625. 388.61 s > error: this `if` statement can be collapsed
  1626. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1962:13
  1627. 388.61 s > |
  1628. 388.61 s > 1962 | / if let SamplingChannelSelector::Named(name) = selector {
  1629. 388.61 s > 1963 | | if let Some(channel) = resolved.named(name) {
  1630. 388.61 s > 1964 | | let entry = SamplingCatalogueEntry::Named(channel.clone());
  1631. 388.61 s > 1965 | | if !entries.contains(&entry) {
  1632. 388.61 s > ... |
  1633. 388.61 s > 1969 | | }
  1634. 388.61 s > | |_____________^
  1635. 388.61 s > |
  1636. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1637. 388.61 s > help: collapse nested if block
  1638. 388.61 s > |
  1639. 388.61 s > 1962 ~ if let SamplingChannelSelector::Named(name) = selector
  1640. 388.61 s > 1963 ~ && let Some(channel) = resolved.named(name) {
  1641. 388.61 s > 1964 | let entry = SamplingCatalogueEntry::Named(channel.clone());
  1642. 388.61 s > ...
  1643. 388.61 s > 1967 | }
  1644. 388.61 s > 1968 ~ }
  1645. 388.61 s > |
  1646. 388.61 s >
  1647. 388.61 s > error: using `clone` on type `Complex<F<f64>>` which implements the `Copy` trait
  1648. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:160:32
  1649. 388.61 s > |
  1650. 388.61 s > 160 | value: value.values[0].clone(),
  1651. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `value.values[0]`
  1652. 388.61 s > |
  1653. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  1654. 388.61 s > = note: `-D clippy::clone-on-copy` implied by `-D warnings`
  1655. 388.61 s > = help: to override `-D warnings` add `#[allow(clippy::clone_on_copy)]`
  1656. 388.61 s >
  1657. 388.61 s > error: the loop variable `column` is only used to index `work`
  1658. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:324:27
  1659. 388.61 s > |
  1660. 388.61 s > 324 | for column in (pivot + 1)..dimension {
  1661. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^
  1662. 388.61 s > |
  1663. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#needless_range_loop
  1664. 388.61 s > help: consider using an iterator
  1665. 388.61 s > |
  1666. 388.61 s > 324 - for column in (pivot + 1)..dimension {
  1667. 388.61 s > 324 + for <item> in work.iter_mut().take(dimension).skip((pivot + 1)) {
  1668. 388.61 s > |
  1669. 388.61 s >
  1670. 388.61 s > error: this `impl` can be derived
  1671. 388.61 s > --> crates/gammalooprs/src/settings/runtime.rs:1259:1
  1672. 388.61 s > |
  1673. 388.61 s > 1259 | / impl Default for SamplingChannelDefinition {
  1674. 388.61 s > 1260 | | fn default() -> Self {
  1675. 388.61 s > 1261 | | Self {
  1676. 388.61 s > 1262 | | around: String::new(),
  1677. 388.61 s > ... |
  1678. 388.61 s > 1268 | | }
  1679. 388.61 s > | |_^
  1680. 388.61 s > |
  1681. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#derivable_impls
  1682. 388.61 s > = note: `-D clippy::derivable-impls` implied by `-D warnings`
  1683. 388.61 s > = help: to override `-D warnings` add `#[allow(clippy::derivable_impls)]`
  1684. 388.61 s > help: replace the manual implementation with a derive attribute
  1685. 388.61 s > |
  1686. 388.61 s > 1249 + #[derive(Default)]
  1687. 388.61 s > 1250 | pub struct SamplingChannelDefinition {
  1688. 388.61 s > |
  1689. 388.61 s >
  1690. 388.61 s > error: this `impl` can be derived
  1691. 388.61 s > --> crates/gammalooprs/src/settings/runtime.rs:1285:1
  1692. 388.61 s > |
  1693. 388.61 s > 1285 | / impl Default for SamplingChannelSelection {
  1694. 388.61 s > 1286 | | fn default() -> Self {
  1695. 388.61 s > 1287 | | Self {
  1696. 388.61 s > 1288 | | weight: SamplingChannelWeight::default(),
  1697. 388.61 s > ... |
  1698. 388.61 s > 1294 | | }
  1699. 388.61 s > | |_^
  1700. 388.61 s > |
  1701. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#derivable_impls
  1702. 388.61 s > help: replace the manual implementation with a derive attribute
  1703. 388.61 s > |
  1704. 388.61 s > 1277 + #[derive(Default)]
  1705. 388.61 s > 1278 | pub struct SamplingChannelSelection {
  1706. 388.61 s > |
  1707. 388.61 s >
  1708. 388.61 s > error: could not compile `gammalooprs` (lib) due to 15 previous errors
  1709. 388.61 s > warning: build failed, waiting for other jobs to finish...
  1710. 388.61 s > error: using `clone` on type `F<f64>` which implements the `Copy` trait
  1711. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:2300:14
  1712. 388.61 s > |
  1713. 388.61 s > 2300 | (point.jacobian.clone() * point.inverse_jacobian.clone() - F(1.0)).abs() < F(1.0e-12)
  1714. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `point.jacobian`
  1715. 388.61 s > |
  1716. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  1717. 388.61 s > = note: `-D clippy::clone-on-copy` implied by `-D warnings`
  1718. 388.61 s > = help: to override `-D warnings` add `#[allow(clippy::clone_on_copy)]`
  1719. 388.61 s >
  1720. 388.61 s > error: using `clone` on type `F<f64>` which implements the `Copy` trait
  1721. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:2300:39
  1722. 388.61 s > |
  1723. 388.61 s > 2300 | (point.jacobian.clone() * point.inverse_jacobian.clone() - F(1.0)).abs() < F(1.0e-12)
  1724. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `point.inverse_jacobian`
  1725. 388.61 s > |
  1726. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  1727. 388.61 s >
  1728. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1729. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2428:9
  1730. 388.61 s > |
  1731. 388.61 s > 2428 | selection.default_channel_selection = vec!["missing".into()];
  1732. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1733. 388.61 s > |
  1734. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["missing".into()], ..Default::default() }` and removing relevant reassignments
  1735. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2427:9
  1736. 388.61 s > |
  1737. 388.61 s > 2427 | let mut selection = SamplingChannelSelection::default();
  1738. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1739. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1740. 388.61 s > = note: `-D clippy::field-reassign-with-default` implied by `-D warnings`
  1741. 388.61 s > = help: to override `-D warnings` add `#[allow(clippy::field_reassign_with_default)]`
  1742. 388.61 s >
  1743. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1744. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2448:9
  1745. 388.61 s > |
  1746. 388.61 s > 2448 | selection.default_channel_selection = vec!["named".into()];
  1747. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1748. 388.61 s > |
  1749. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["named".into()], ..Default::default() }` and removing relevant reassignments
  1750. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2447:9
  1751. 388.61 s > |
  1752. 388.61 s > 2447 | let mut selection = SamplingChannelSelection::default();
  1753. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1754. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1755. 388.61 s >
  1756. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1757. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2471:9
  1758. 388.61 s > |
  1759. 388.61 s > 2471 | selection.default_channel_selection = vec!["threshold".into()];
  1760. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1761. 388.61 s > |
  1762. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  1763. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2470:9
  1764. 388.61 s > |
  1765. 388.61 s > 2470 | let mut selection = SamplingChannelSelection::default();
  1766. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1767. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1768. 388.61 s >
  1769. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1770. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2523:9
  1771. 388.61 s > |
  1772. 388.61 s > 2523 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  1773. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1774. 388.61 s > |
  1775. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  1776. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2522:9
  1777. 388.61 s > |
  1778. 388.61 s > 2522 | let mut selection = SamplingChannelSelection::default();
  1779. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1780. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1781. 388.61 s >
  1782. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1783. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2540:9
  1784. 388.61 s > |
  1785. 388.61 s > 2540 | selection.default_channel_selection = vec!["auto:surfaces".into(), "auto:lmb".into()];
  1786. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1787. 388.61 s > |
  1788. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:surfaces".into(), "auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  1789. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2539:9
  1790. 388.61 s > |
  1791. 388.61 s > 2539 | let mut selection = SamplingChannelSelection::default();
  1792. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1793. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1794. 388.61 s >
  1795. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1796. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2550:9
  1797. 388.61 s > |
  1798. 388.61 s > 2550 | selection.default_channel_selection = vec!["auto:surfaces".into()];
  1799. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1800. 388.61 s > |
  1801. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:surfaces".into()], ..Default::default() }` and removing relevant reassignments
  1802. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2549:9
  1803. 388.61 s > |
  1804. 388.61 s > 2549 | let mut selection = SamplingChannelSelection::default();
  1805. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1806. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1807. 388.61 s >
  1808. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1809. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2627:13
  1810. 388.61 s > |
  1811. 388.61 s > 2627 | selection.default_channel_selection = vec![name.to_owned()];
  1812. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1813. 388.61 s > |
  1814. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec![name.to_owned()], ..Default::default() }` and removing relevant reassignments
  1815. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2626:13
  1816. 388.61 s > |
  1817. 388.61 s > 2626 | let mut selection = SamplingChannelSelection::default();
  1818. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1819. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1820. 388.61 s >
  1821. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1822. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2661:9
  1823. 388.61 s > |
  1824. 388.61 s > 2661 | selection.default_channel_selection = vec!["threshold".into()];
  1825. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1826. 388.61 s > |
  1827. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  1828. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2660:9
  1829. 388.61 s > |
  1830. 388.61 s > 2660 | let mut selection = SamplingChannelSelection::default();
  1831. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1832. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1833. 388.61 s >
  1834. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1835. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2706:9
  1836. 388.61 s > |
  1837. 388.61 s > 2706 | selection.default_channel_selection = vec!["conditional".into()];
  1838. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1839. 388.61 s > |
  1840. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["conditional".into()], ..Default::default() }` and removing relevant reassignments
  1841. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2705:9
  1842. 388.61 s > |
  1843. 388.61 s > 2705 | let mut selection = SamplingChannelSelection::default();
  1844. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1845. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1846. 388.61 s >
  1847. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1848. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2768:9
  1849. 388.61 s > |
  1850. 388.61 s > 2768 | selection.default_channel_selection = vec!["h".into(), "z".into()];
  1851. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1852. 388.61 s > |
  1853. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["h".into(), "z".into()], ..Default::default() }` and removing relevant reassignments
  1854. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2767:9
  1855. 388.61 s > |
  1856. 388.61 s > 2767 | let mut selection = SamplingChannelSelection::default();
  1857. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1858. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1859. 388.61 s >
  1860. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1861. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2812:9
  1862. 388.61 s > |
  1863. 388.61 s > 2812 | selection.default_channel_selection = vec!["auto:lmb".into()];
  1864. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1865. 388.61 s > |
  1866. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  1867. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2811:9
  1868. 388.61 s > |
  1869. 388.61 s > 2811 | let mut selection = SamplingChannelSelection::default();
  1870. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1871. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1872. 388.61 s >
  1873. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1874. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2834:9
  1875. 388.61 s > |
  1876. 388.61 s > 2834 | selection.default_channel_selection = vec!["auto:lmb".into()];
  1877. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1878. 388.61 s > |
  1879. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  1880. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2833:9
  1881. 388.61 s > |
  1882. 388.61 s > 2833 | let mut selection = SamplingChannelSelection::default();
  1883. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1884. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1885. 388.61 s >
  1886. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1887. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2886:9
  1888. 388.61 s > |
  1889. 388.61 s > 2886 | selection.default_channel_selection = vec!["named".into()];
  1890. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1891. 388.61 s > |
  1892. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["named".into()], ..Default::default() }` and removing relevant reassignments
  1893. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2885:9
  1894. 388.61 s > |
  1895. 388.61 s > 2885 | let mut selection = SamplingChannelSelection::default();
  1896. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1897. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1898. 388.61 s >
  1899. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1900. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2935:9
  1901. 388.61 s > |
  1902. 388.61 s > 2935 | selection.default_channel_selection = vec!["threshold".into()];
  1903. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1904. 388.61 s > |
  1905. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  1906. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2934:9
  1907. 388.61 s > |
  1908. 388.61 s > 2934 | let mut selection = SamplingChannelSelection::default();
  1909. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1910. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1911. 388.61 s >
  1912. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1913. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2982:9
  1914. 388.61 s > |
  1915. 388.61 s > 2982 | selection.default_channel_selection = vec!["cut_channel".into()];
  1916. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1917. 388.61 s > |
  1918. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_channel".into()], ..Default::default() }` and removing relevant reassignments
  1919. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2981:9
  1920. 388.61 s > |
  1921. 388.61 s > 2981 | let mut selection = SamplingChannelSelection::default();
  1922. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1923. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1924. 388.61 s >
  1925. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1926. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3012:9
  1927. 388.61 s > |
  1928. 388.61 s > 3012 | selection.default_channel_selection = vec!["right_channel".into()];
  1929. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1930. 388.61 s > |
  1931. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["right_channel".into()], ..Default::default() }` and removing relevant reassignments
  1932. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3011:9
  1933. 388.61 s > |
  1934. 388.61 s > 3011 | let mut selection = SamplingChannelSelection::default();
  1935. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1936. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1937. 388.61 s >
  1938. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1939. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3039:9
  1940. 388.61 s > |
  1941. 388.61 s > 3039 | selection.default_channel_selection = vec!["cut_chart".into()];
  1942. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1943. 388.61 s > |
  1944. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_chart".into()], ..Default::default() }` and removing relevant reassignments
  1945. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3038:9
  1946. 388.61 s > |
  1947. 388.61 s > 3038 | let mut selection = SamplingChannelSelection::default();
  1948. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1949. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1950. 388.61 s >
  1951. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1952. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3065:9
  1953. 388.61 s > |
  1954. 388.61 s > 3065 | selection.default_channel_selection = vec!["cut_chart".into()];
  1955. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1956. 388.61 s > |
  1957. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_chart".into()], ..Default::default() }` and removing relevant reassignments
  1958. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3064:9
  1959. 388.61 s > |
  1960. 388.61 s > 3064 | let mut selection = SamplingChannelSelection::default();
  1961. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1962. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1963. 388.61 s >
  1964. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1965. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3114:9
  1966. 388.61 s > |
  1967. 388.61 s > 3114 | selection.default_channel_selection = vec!["left_target".into()];
  1968. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1969. 388.61 s > |
  1970. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["left_target".into()], ..Default::default() }` and removing relevant reassignments
  1971. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3113:9
  1972. 388.61 s > |
  1973. 388.61 s > 3113 | let mut selection = SamplingChannelSelection::default();
  1974. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1975. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1976. 388.61 s >
  1977. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1978. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3158:9
  1979. 388.61 s > |
  1980. 388.61 s > 3158 | selection.default_channel_selection = vec!["threshold".into()];
  1981. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1982. 388.61 s > |
  1983. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  1984. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3157:9
  1985. 388.61 s > |
  1986. 388.61 s > 3157 | let mut selection = SamplingChannelSelection::default();
  1987. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1988. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1989. 388.61 s >
  1990. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  1991. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3182:9
  1992. 388.61 s > |
  1993. 388.61 s > 3182 | selection.default_channel_selection = vec!["joint".into()];
  1994. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1995. 388.61 s > |
  1996. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  1997. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3181:9
  1998. 388.61 s > |
  1999. 388.61 s > 3181 | let mut selection = SamplingChannelSelection::default();
  2000. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2001. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2002. 388.61 s >
  2003. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  2004. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3215:9
  2005. 388.61 s > |
  2006. 388.61 s > 3215 | selection.default_channel_selection = vec!["joint".into()];
  2007. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2008. 388.61 s > |
  2009. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  2010. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3214:9
  2011. 388.61 s > |
  2012. 388.61 s > 3214 | let mut selection = SamplingChannelSelection::default();
  2013. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2014. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2015. 388.61 s >
  2016. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  2017. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3272:9
  2018. 388.61 s > |
  2019. 388.61 s > 3272 | selection.default_channel_selection = vec!["joint".into()];
  2020. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2021. 388.61 s > |
  2022. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  2023. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3271:9
  2024. 388.61 s > |
  2025. 388.61 s > 3271 | let mut selection = SamplingChannelSelection::default();
  2026. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2027. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2028. 388.61 s >
  2029. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  2030. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3376:9
  2031. 388.61 s > |
  2032. 388.61 s > 3376 | selection.default_channel_selection = vec!["auto:lmb".into()];
  2033. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2034. 388.61 s > |
  2035. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  2036. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3375:9
  2037. 388.61 s > |
  2038. 388.61 s > 3375 | let mut selection = SamplingChannelSelection::default();
  2039. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2040. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2041. 388.61 s >
  2042. 388.61 s > error: using `clone` on type `Complex<F<f64>>` which implements the `Copy` trait
  2043. 388.61 s > --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:160:32
  2044. 388.61 s > |
  2045. 388.61 s > 160 | value: value.values[0].clone(),
  2046. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `value.values[0]`
  2047. 388.61 s > |
  2048. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  2049. 388.61 s >
  2050. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  2051. 388.61 s > --> crates/gammalooprs/src/integrands/process/mod.rs:5396:9
  2052. 388.61 s > |
  2053. 388.61 s > 5396 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  2054. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2055. 388.61 s > |
  2056. 388.61 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  2057. 388.61 s > --> crates/gammalooprs/src/integrands/process/mod.rs:5395:9
  2058. 388.61 s > |
  2059. 388.61 s > 5395 | let mut selection = SamplingChannelSelection::default();
  2060. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2061. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2062. 388.61 s >
  2063. 388.61 s > error: field assignment outside of initializer for an instance created with Default::default()
  2064. 388.61 s > --> crates/gammalooprs/src/integrands/process/mod.rs:5399:9
  2065. 388.61 s > |
  2066. 388.61 s > 5399 | parameterization_settings.sampling_channels = selection;
  2067. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2068. 388.61 s > |
  2069. 388.61 s > note: consider initializing the variable with `settings::runtime::ParameterizationSettings { sampling_channels: selection, ..Default::default() }` and removing relevant reassignments
  2070. 388.61 s > --> crates/gammalooprs/src/integrands/process/mod.rs:5398:9
  2071. 388.61 s > |
  2072. 388.61 s > 5398 | let mut parameterization_settings = ParameterizationSettings::default();
  2073. 388.61 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2074. 388.61 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2075. 388.61 s >
  2076. 388.61 s > error: could not compile `gammalooprs` (lib test) due to 43 previous errors
  2077. 388.61 s For full logs, run:
  2078. 388.61 s nix log /nix/store/chlmhmgq6rv00z64gh1dl1zxzvaxdj0f-gammaloop-workspace-clippy-0.1.0.drv
  2079. 388.76 s Build failed.
Tail Raw Logs