build checks.x86_64-linux.gammaloop-clippy

Reproduce this run
Retry Run
  1. 0.00 s $ /nix/store/9ypz3flqsrl5xl495mm8h645gadjsxi1-coreutils-9.11/bin/timeout --kill-after=15s 7200s /nix/store/23zk8sgzamrbmj1fday15szf7f2279s8-nix-2.34.7/bin/nix --extra-experimental-features nix-command --extra-experimental-features flakes --log-format internal-json build --no-link --print-out-paths git+https://github.com/alphal00p/gammaloop?ref=advanced_sampling&rev=7f1b3e01a47455d6940cbc5093e6c9f7a9777a60&shallow=1#checks.x86_64-linux.gammaloop-clippy --print-build-logs
  2. 2.28 s
  3. 2.98 s Building /nix/store/l6s72cbhcyppdy6qmrlx5xxbmnbpfaza-gammaloop-workspace-clippy-0.1.0.drv
  4. 3.08 s [gammaloop-workspace-clippy] Phase: unpackPhase
  5. 3.09 s [gammaloop-workspace-clippy] unpacking source archive /nix/store/f4j1b4vzvikvpimn1dm8pnf1v07qz7i7-source
  6. 3.24 s [gammaloop-workspace-clippy] source root is source
  7. 3.29 s [gammaloop-workspace-clippy] Phase: patchPhase
  8. 3.30 s [gammaloop-workspace-clippy] Executing configureCargoCommonVars
  9. 3.30 s [gammaloop-workspace-clippy] decompressing cargo artifacts from /nix/store/50vpxlcgfxf2d57i27v3d10zjwxxbm2r-gammaloop-workspace-deps-deps-0.1.0/target.tar.zst to target
  10. 5.06 s [gammaloop-workspace-clippy] Phase: updateAutotoolsGnuConfigScriptsPhase
  11. 5.10 s [gammaloop-workspace-clippy] Phase: configurePhase
  12. 5.11 s [gammaloop-workspace-clippy] will append /build/source/.cargo-home/config.toml with contents of /nix/store/5drf77x6km4ky7gwlrzdx9bbd6fz09g3-vendor-cargo-deps/config.toml
  13. 5.12 s [gammaloop-workspace-clippy] default configurePhase, nothing to do
  14. 5.12 s [gammaloop-workspace-clippy] Phase: buildPhase
  15. 5.12 s [gammaloop-workspace-clippy] +++ command cargo --version
  16. 5.13 s [gammaloop-workspace-clippy] cargo 1.97.0 (c980f4866 2026-06-30)
  17. 5.16 s [gammaloop-workspace-clippy] +++ command cargo clippy --profile ci-optim --locked --workspace --features gammaloop-tracing-filter/clap,gammaloop-tracing-filter/symbolica,idenso/bincode,idenso/reference-cases,linnet/bincode,linnet/drawing,linnet/rkyv,linnet/serde,linnet/symbolica,spenso-macros/shadowing,spenso/shadowing,symbolica/tracing_max_level_info,three-dimensional-reps/display,three-dimensional-reps/eval,three-dimensional-reps/serde --all-targets --no-deps -- --deny warnings
  18. 5.71 s [gammaloop-workspace-clippy] Checking cfg-if v1.0.4
  19. 5.71 s [gammaloop-workspace-clippy] Checking memchr v2.8.0
  20. 5.71 s [gammaloop-workspace-clippy] Checking once_cell v1.21.4
  21. 5.72 s [gammaloop-workspace-clippy] Checking either v1.15.0
  22. 5.73 s [gammaloop-workspace-clippy] Checking serde_core v1.0.228
  23. 5.73 s [gammaloop-workspace-clippy] Checking libc v0.2.186
  24. 5.73 s [gammaloop-workspace-clippy] Checking libm v0.2.16
  25. 5.73 s [gammaloop-workspace-clippy] Checking itoa v1.0.18
  26. 5.75 s [gammaloop-workspace-clippy] Checking log v0.4.29
  27. 5.75 s [gammaloop-workspace-clippy] Checking regex-syntax v0.8.10
  28. 5.75 s [gammaloop-workspace-clippy] Checking zerocopy v0.8.48
  29. 5.78 s [gammaloop-workspace-clippy] Checking crossbeam-utils v0.8.21
  30. 5.79 s [gammaloop-workspace-clippy] Checking equivalent v1.0.2
  31. 5.80 s [gammaloop-workspace-clippy] Checking zmij v1.0.21
  32. 5.81 s [gammaloop-workspace-clippy] Checking bytemuck v1.25.0
  33. 5.81 s [gammaloop-workspace-clippy] Checking lazy_static v1.5.0
  34. 5.81 s [gammaloop-workspace-clippy] Compiling target-lexicon v0.13.5
  35. 6.58 s [gammaloop-workspace-clippy] Checking crossbeam-epoch v0.9.18
  36. 6.58 s [gammaloop-workspace-clippy] Checking arrayvec v0.7.6
  37. 6.58 s [gammaloop-workspace-clippy] Checking safe_arch v0.7.4
  38. 6.58 s [gammaloop-workspace-clippy] Checking itertools v0.14.0
  39. 6.63 s [gammaloop-workspace-clippy] Checking powerfmt v0.2.0
  40. 6.63 s [gammaloop-workspace-clippy] Checking num-traits v0.2.19
  41. 6.63 s [gammaloop-workspace-clippy] Checking aho-corasick v1.1.4
  42. 6.63 s [gammaloop-workspace-clippy] Checking time-core v0.1.8
  43. 6.63 s [gammaloop-workspace-clippy] Checking pin-project-lite v0.2.17
  44. 6.63 s [gammaloop-workspace-clippy] Checking num_threads v0.1.7
  45. 6.73 s [gammaloop-workspace-clippy] Checking num-conv v0.2.1
  46. 6.74 s [gammaloop-workspace-clippy] Checking tracing-core v0.1.36
  47. 6.81 s [gammaloop-workspace-clippy] Checking foldhash v0.2.0
  48. 6.82 s [gammaloop-workspace-clippy] Checking deranged v0.5.8
  49. 6.83 s [gammaloop-workspace-clippy] Checking allocator-api2 v0.2.21
  50. 6.84 s [gammaloop-workspace-clippy] Checking const-random v0.1.18
  51. 6.91 s [gammaloop-workspace-clippy] Checking static_assertions v1.1.0
  52. 6.96 s [gammaloop-workspace-clippy] Checking nu-ansi-term v0.50.3
  53. 6.97 s [gammaloop-workspace-clippy] Checking winnow v1.0.2
  54. 7.00 s [gammaloop-workspace-clippy] Checking getrandom v0.3.4
  55. 7.03 s [gammaloop-workspace-clippy] Checking unty v0.0.4
  56. 7.03 s [gammaloop-workspace-clippy] Checking tracing v0.1.44
  57. 7.07 s [gammaloop-workspace-clippy] Checking tracing-log v0.2.0
  58. 7.13 s [gammaloop-workspace-clippy] Checking rand_core v0.9.5
  59. 7.16 s [gammaloop-workspace-clippy] Checking wide v0.7.33
  60. 7.20 s [gammaloop-workspace-clippy] Checking gmp-mpfr-sys v1.7.1
  61. 7.25 s [gammaloop-workspace-clippy] Checking crossbeam-deque v0.8.6
  62. 7.37 s [gammaloop-workspace-clippy] Checking sharded-slab v0.1.7
  63. 7.39 s [gammaloop-workspace-clippy] Checking safe_arch v1.0.0
  64. 7.44 s [gammaloop-workspace-clippy] Checking thread_local v1.1.9
  65. 7.47 s [gammaloop-workspace-clippy] Checking rayon-core v1.13.0
  66. 7.48 s [gammaloop-workspace-clippy] Checking hashbrown v0.16.1
  67. 7.51 s [gammaloop-workspace-clippy] Checking az v1.3.0
  68. 7.64 s [gammaloop-workspace-clippy] Checking toml_writer v1.1.1+spec-1.1.0
  69. 7.73 s [gammaloop-workspace-clippy] Checking indenter v0.3.4
  70. 7.77 s [gammaloop-workspace-clippy] Compiling phf_shared v0.11.3
  71. 7.81 s [gammaloop-workspace-clippy] Checking anyhow v1.0.102
  72. 7.88 s [gammaloop-workspace-clippy] Checking wide v1.3.0
  73. 8.01 s [gammaloop-workspace-clippy] Checking rawpointer v0.2.1
  74. 8.05 s [gammaloop-workspace-clippy] Checking alloc-no-stdlib v2.0.4
  75. 8.05 s [gammaloop-workspace-clippy] Checking dyn-clone v1.0.20
  76. 8.07 s [gammaloop-workspace-clippy] Checking rayon v1.12.0
  77. 8.08 s [gammaloop-workspace-clippy] Checking utf8parse v0.2.2
  78. 8.13 s [gammaloop-workspace-clippy] Checking anstyle-parse v1.0.0
  79. 8.15 s [gammaloop-workspace-clippy] Checking toml_parser v1.1.2+spec-1.1.0
  80. 8.17 s [gammaloop-workspace-clippy] Checking alloc-stdlib v0.2.2
  81. 8.17 s [gammaloop-workspace-clippy] Checking matrixmultiply v0.3.10
  82. 8.25 s [gammaloop-workspace-clippy] Checking anstyle v1.0.14
  83. 8.29 s [gammaloop-workspace-clippy] Checking colored v3.1.1
  84. 8.39 s [gammaloop-workspace-clippy] Checking is_terminal_polyfill v1.70.2
  85. 8.42 s [gammaloop-workspace-clippy] Checking anstyle-query v1.1.5
  86. 8.43 s [gammaloop-workspace-clippy] Checking serde v1.0.228
  87. 8.51 s [gammaloop-workspace-clippy] Checking serde_json v1.0.149
  88. 8.51 s [gammaloop-workspace-clippy] Checking bitflags v2.11.1
  89. 8.54 s [gammaloop-workspace-clippy] Checking serde_spanned v1.1.1
  90. 8.57 s [gammaloop-workspace-clippy] Checking toml_datetime v1.1.1+spec-1.1.0
  91. 8.58 s [gammaloop-workspace-clippy] Checking colorchoice v1.0.5
  92. 8.59 s [gammaloop-workspace-clippy] Checking approx v0.5.1
  93. 8.67 s [gammaloop-workspace-clippy] Checking num-integer v0.1.46
  94. 8.77 s [gammaloop-workspace-clippy] Checking anstream v1.0.0
  95. 8.83 s [gammaloop-workspace-clippy] Compiling phf_generator v0.11.3
  96. 8.85 s [gammaloop-workspace-clippy] Checking time v0.3.47
  97. 8.88 s [gammaloop-workspace-clippy] Checking eyre v0.6.12
  98. 8.90 s [gammaloop-workspace-clippy] Checking unicode-width v0.2.2
  99. 8.92 s [gammaloop-workspace-clippy] Checking regex-automata v0.4.14
  100. 8.93 s [gammaloop-workspace-clippy] Checking bitflags v1.3.2
  101. 9.01 s [gammaloop-workspace-clippy] Checking region v3.0.2
  102. 9.01 s [gammaloop-workspace-clippy] Checking brotli-decompressor v5.0.0
  103. 9.04 s [gammaloop-workspace-clippy] Compiling pyo3-build-config v0.28.3
  104. 9.16 s [gammaloop-workspace-clippy] Checking smallvec v1.15.1
  105. 9.22 s [gammaloop-workspace-clippy] Checking num-complex v0.4.6
  106. 9.26 s [gammaloop-workspace-clippy] Checking tracing-serde v0.2.0
  107. 9.36 s [gammaloop-workspace-clippy] Checking bincode v2.0.1
  108. 9.43 s [gammaloop-workspace-clippy] Compiling phf_codegen v0.11.3
  109. 9.46 s [gammaloop-workspace-clippy] Checking toml v1.1.2+spec-1.1.0
  110. 9.49 s [gammaloop-workspace-clippy] Checking wasmtime-jit-icache-coherence v34.0.2
  111. 9.59 s [gammaloop-workspace-clippy] Checking hugepage-rs v0.1.1
  112. 9.60 s [gammaloop-workspace-clippy] Checking inventory v0.3.24
  113. 9.66 s [gammaloop-workspace-clippy] Checking spec_math v0.1.6
  114. 9.67 s [gammaloop-workspace-clippy] Checking thiserror v2.0.18
  115. 9.74 s [gammaloop-workspace-clippy] Checking smartstring v1.0.1
  116. 9.78 s [gammaloop-workspace-clippy] Compiling getopts v0.2.24
  117. 9.91 s [gammaloop-workspace-clippy] Checking libloading v0.9.0
  118. 10.05 s [gammaloop-workspace-clippy] Checking bytes v1.11.1
  119. 10.13 s [gammaloop-workspace-clippy] Checking byteorder v1.5.0
  120. 10.59 s [gammaloop-workspace-clippy] Checking self_cell v1.2.2
  121. 10.72 s [gammaloop-workspace-clippy] Checking append-only-vec v0.1.8
  122. 10.77 s [gammaloop-workspace-clippy] Checking tinyjson v2.5.1
  123. 10.94 s [gammaloop-workspace-clippy] Checking simba v0.9.1
  124. 10.97 s [gammaloop-workspace-clippy] Compiling unicode_names2_generator v1.3.0
  125. 11.19 s [gammaloop-workspace-clippy] Checking linux-raw-sys v0.12.1
  126. 11.36 s [gammaloop-workspace-clippy] Compiling unic-char-range v0.9.0
  127. 11.50 s [gammaloop-workspace-clippy] Compiling unic-common v0.9.0
  128. 11.52 s [gammaloop-workspace-clippy] Compiling unic-char-property v0.9.0
  129. 11.60 s [gammaloop-workspace-clippy] Compiling unic-ucd-version v0.9.0
  130. 11.61 s [gammaloop-workspace-clippy] Compiling is-macro v0.3.7
  131. 11.64 s [gammaloop-workspace-clippy] Compiling rustpython-parser-vendored v0.4.0
  132. 11.64 s [gammaloop-workspace-clippy] Checking iana-time-zone v0.1.65
  133. 11.67 s [gammaloop-workspace-clippy] Checking ppv-lite86 v0.2.21
  134. 11.70 s [gammaloop-workspace-clippy] Checking ahash v0.8.12
  135. 11.82 s [gammaloop-workspace-clippy] Checking brotli v8.0.2
  136. 11.84 s [gammaloop-workspace-clippy] Checking chrono v0.4.44
  137. 11.86 s [gammaloop-workspace-clippy] Compiling rustpython-parser v0.4.0
  138. 12.06 s [gammaloop-workspace-clippy] Compiling phf v0.11.3
  139. 12.23 s [gammaloop-workspace-clippy] Checking rand_chacha v0.9.0
  140. 12.29 s [gammaloop-workspace-clippy] Checking rustc-hash v2.1.2
  141. 12.31 s [gammaloop-workspace-clippy] Checking rustix v1.1.4
  142. 12.41 s [gammaloop-workspace-clippy] Compiling unic-ucd-ident v0.9.0
  143. 12.43 s [gammaloop-workspace-clippy] Compiling unic-emoji-char v0.9.0
  144. 12.46 s [gammaloop-workspace-clippy] Checking ndarray v0.17.2
  145. 12.56 s [gammaloop-workspace-clippy] Compiling rustc-hash v1.1.0
  146. 12.69 s [gammaloop-workspace-clippy] Compiling lalrpop-util v0.20.2
  147. 12.84 s [gammaloop-workspace-clippy] Checking rug v1.30.0
  148. 12.86 s [gammaloop-workspace-clippy] Compiling symbolica v2.2.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  149. 12.96 s [gammaloop-workspace-clippy] Checking unicode-segmentation v1.13.2
  150. 12.96 s [gammaloop-workspace-clippy] Checking rand v0.9.4
  151. 13.21 s [gammaloop-workspace-clippy] Checking typenum v1.20.0
  152. 14.31 s [gammaloop-workspace-clippy] Checking getrandom v0.2.17
  153. 14.37 s [gammaloop-workspace-clippy] Checking scopeguard v1.2.0
  154. 14.38 s [gammaloop-workspace-clippy] Checking parking_lot_core v0.9.12
  155. 14.43 s [gammaloop-workspace-clippy] Checking lock_api v0.4.14
  156. 14.51 s [gammaloop-workspace-clippy] Checking unicode-ident v1.0.24
  157. 14.56 s [gammaloop-workspace-clippy] Checking hashbrown v0.17.0
  158. 14.60 s [gammaloop-workspace-clippy] Checking errno v0.3.14
  159. 14.72 s [gammaloop-workspace-clippy] Checking terminal_size v0.4.4
  160. 14.77 s [gammaloop-workspace-clippy] Checking parking_lot v0.12.5
  161. 14.83 s [gammaloop-workspace-clippy] Checking clap_lex v1.1.0
  162. 14.86 s [gammaloop-workspace-clippy] Checking strsim v0.11.1
  163. 14.91 s [gammaloop-workspace-clippy] Checking unicase v2.9.0
  164. 15.08 s [gammaloop-workspace-clippy] Checking signal-hook-registry v1.4.8
  165. 15.15 s [gammaloop-workspace-clippy] Checking vte v0.14.1
  166. 15.17 s [gammaloop-workspace-clippy] Checking symjit v2.21.0
  167. 15.26 s [gammaloop-workspace-clippy] Checking same-file v1.0.6
  168. 15.28 s [gammaloop-workspace-clippy] Checking signal-hook v0.3.18
  169. 15.29 s [gammaloop-workspace-clippy] Checking indexmap v2.14.0
  170. 15.40 s [gammaloop-workspace-clippy] Checking clap_builder v4.6.0
  171. 15.45 s [gammaloop-workspace-clippy] Checking walkdir v2.5.0
  172. 15.57 s [gammaloop-workspace-clippy] Checking half v2.7.1
  173. 15.67 s [gammaloop-workspace-clippy] Checking matchers v0.2.0
  174. 15.78 s [gammaloop-workspace-clippy] Checking regex v1.12.3
  175. 15.82 s [gammaloop-workspace-clippy] Checking generic-array v0.14.7
  176. 15.87 s [gammaloop-workspace-clippy] Checking mio v1.2.0
  177. 15.90 s [gammaloop-workspace-clippy] Checking tracing-subscriber v0.3.23
  178. 15.99 s [gammaloop-workspace-clippy] Checking ciborium-io v0.2.2
  179. 16.09 s [gammaloop-workspace-clippy] Checking minimal-lexical v0.2.1
  180. 16.35 s [gammaloop-workspace-clippy] Checking ciborium-ll v0.2.2
  181. 16.57 s [gammaloop-workspace-clippy] Checking derive_more v2.1.1
  182. 16.62 s [gammaloop-workspace-clippy] Checking signal-hook-mio v0.2.5
  183. 16.67 s [gammaloop-workspace-clippy] Checking num-bigint v0.4.6
  184. 16.77 s [gammaloop-workspace-clippy] Checking console v0.16.3
  185. 16.78 s [gammaloop-workspace-clippy] Checking nom v7.1.3
  186. 16.80 s [gammaloop-workspace-clippy] Checking bstr v1.12.1
  187. 16.82 s [gammaloop-workspace-clippy] Checking block-buffer v0.10.4
  188. 16.94 s [gammaloop-workspace-clippy] Checking crypto-common v0.1.7
  189. 17.02 s [gammaloop-workspace-clippy] Checking digest v0.10.7
  190. 17.45 s [gammaloop-workspace-clippy] Checking cpufeatures v0.2.17
  191. 17.52 s [gammaloop-workspace-clippy] Checking winnow v0.7.15
  192. 17.64 s [gammaloop-workspace-clippy] Checking linux-raw-sys v0.4.15
  193. 17.69 s [gammaloop-workspace-clippy] Checking sha2 v0.10.9
  194. 17.81 s [gammaloop-workspace-clippy] Checking globset v0.4.18
  195. 18.14 s [gammaloop-workspace-clippy] Checking ciborium v0.2.2
  196. 18.16 s [gammaloop-workspace-clippy] Checking rand_core v0.6.4
  197. 18.19 s [gammaloop-workspace-clippy] Checking getrandom v0.4.2
  198. 18.42 s [gammaloop-workspace-clippy] Checking rustix v0.38.44
  199. 18.51 s [gammaloop-workspace-clippy] Checking plotters-backend v0.3.7
  200. 18.59 s [gammaloop-workspace-clippy] Checking fastrand v2.4.1
  201. 18.78 s [gammaloop-workspace-clippy] Checking fnv v1.0.7
  202. 18.83 s [gammaloop-workspace-clippy] Checking tempfile v3.27.0
  203. 18.97 s [gammaloop-workspace-clippy] Checking plotters-svg v0.3.7
  204. 19.03 s [gammaloop-workspace-clippy] Checking xprec v0.2.2
  205. 19.12 s [gammaloop-workspace-clippy] Checking rust-embed-utils v8.11.0
  206. 19.14 s [gammaloop-workspace-clippy] Checking toml_datetime v0.6.11
  207. 19.36 s [gammaloop-workspace-clippy] Compiling unicode_names2 v1.3.0
  208. 19.38 s [gammaloop-workspace-clippy] Checking serde_spanned v0.6.9
  209. 19.44 s [gammaloop-workspace-clippy] Checking itertools v0.10.5
  210. 19.48 s [gammaloop-workspace-clippy] Checking cast v0.3.0
  211. 19.48 s [gammaloop-workspace-clippy] Checking tap v1.0.1
  212. 19.53 s [gammaloop-workspace-clippy] Checking toml_write v0.1.2
  213. 19.57 s [gammaloop-workspace-clippy] Checking wyz v0.5.1
  214. 19.59 s [gammaloop-workspace-clippy] Checking plotters v0.3.7
  215. 19.66 s [gammaloop-workspace-clippy] Checking rand_chacha v0.3.1
  216. 19.83 s [gammaloop-workspace-clippy] Checking radium v0.7.0
  217. 19.91 s [gammaloop-workspace-clippy] Checking typeid v1.0.3
  218. 19.96 s [gammaloop-workspace-clippy] Checking similar v2.7.0
  219. 19.97 s [gammaloop-workspace-clippy] Checking crossterm v0.28.1
  220. 20.07 s [gammaloop-workspace-clippy] Checking tinytemplate v1.2.1
  221. 20.23 s [gammaloop-workspace-clippy] Checking is-terminal v0.4.17
  222. 20.32 s [gammaloop-workspace-clippy] Checking anes v0.1.6
  223. 20.56 s [gammaloop-workspace-clippy] Checking bytecount v0.6.9
  224. 20.58 s [gammaloop-workspace-clippy] Checking oorandom v11.1.5
  225. 20.71 s [gammaloop-workspace-clippy] Checking funty v2.0.0
  226. 20.73 s [gammaloop-workspace-clippy] Checking rand v0.8.6
  227. 20.76 s [gammaloop-workspace-clippy] Checking ansitok v0.3.0
  228. 20.82 s [gammaloop-workspace-clippy] Checking ron v0.12.1
  229. 20.92 s [gammaloop-workspace-clippy] Checking toml_edit v0.25.11+spec-1.1.0
  230. 21.41 s [gammaloop-workspace-clippy] Checking clap v4.6.1
  231. 21.45 s [gammaloop-workspace-clippy] Checking env_filter v1.0.1
  232. 21.52 s [gammaloop-workspace-clippy] Checking uncased v0.9.10
  233. 21.61 s [gammaloop-workspace-clippy] Checking ansi-str v0.9.0
  234. 21.63 s [gammaloop-workspace-clippy] Checking testing_table v0.3.0
  235. 21.66 s [gammaloop-workspace-clippy] Checking jiff v0.2.24
  236. 21.70 s [gammaloop-workspace-clippy] Checking criterion-plot v0.5.0
  237. 21.70 s [gammaloop-workspace-clippy] Checking ptr_meta v0.1.4
  238. 21.75 s [gammaloop-workspace-clippy] Checking simdutf8 v0.1.5
  239. 21.79 s [gammaloop-workspace-clippy] Checking bitvec v1.0.1
  240. 21.79 s [gammaloop-workspace-clippy] Checking ucd-trie v0.1.7
  241. 21.82 s [gammaloop-workspace-clippy] Checking ahash v0.7.8
  242. 22.18 s [gammaloop-workspace-clippy] Checking pest v2.8.6
  243. 22.19 s [gammaloop-workspace-clippy] Checking bytecheck v0.6.12
  244. 22.21 s [gammaloop-workspace-clippy] Checking papergrid v0.17.0
  245. 22.22 s [gammaloop-workspace-clippy] Checking hashbrown v0.12.3
  246. 22.25 s [gammaloop-workspace-clippy] Checking approx v0.4.0
  247. 22.31 s [gammaloop-workspace-clippy] Checking insta v1.47.2
  248. 22.41 s [gammaloop-workspace-clippy] Checking seahash v4.1.0
  249. 22.42 s [gammaloop-workspace-clippy] Checking criterion v0.5.1
  250. 22.57 s [gammaloop-workspace-clippy] Checking cgmath v0.18.0
  251. 22.64 s [gammaloop-workspace-clippy] Checking toml_edit v0.22.27
  252. 22.70 s [gammaloop-workspace-clippy] Checking num-rational v0.4.2
  253. 23.35 s [gammaloop-workspace-clippy] Checking num-iter v0.1.45
  254. 23.46 s [gammaloop-workspace-clippy] Checking rend v0.4.2
  255. 23.53 s [gammaloop-workspace-clippy] Checking ref-ops v0.2.5
  256. 23.59 s [gammaloop-workspace-clippy] Checking num v0.4.3
  257. 23.64 s [gammaloop-workspace-clippy] Checking rand_xoshiro v0.6.0
  258. 23.69 s [gammaloop-workspace-clippy] Checking features v0.10.0
  259. 23.80 s [gammaloop-workspace-clippy] Checking constcat v0.5.1
  260. 23.88 s [gammaloop-workspace-clippy] Checking gat-lending-iterator v0.1.8
  261. 24.01 s [gammaloop-workspace-clippy] Checking colored v2.2.0
  262. 24.21 s [gammaloop-workspace-clippy] Checking constant_time_eq v0.4.2
  263. 24.26 s [gammaloop-workspace-clippy] Checking cpufeatures v0.3.0
  264. 24.34 s [gammaloop-workspace-clippy] Checking arrayref v0.3.9
  265. 24.42 s [gammaloop-workspace-clippy] Checking dot-parser v0.5.1
  266. 24.45 s [gammaloop-workspace-clippy] Checking base64 v0.22.1
  267. 24.53 s [gammaloop-workspace-clippy] Checking joinery v2.1.0
  268. 24.61 s [gammaloop-workspace-clippy] Checking blake3 v1.8.5
  269. 24.72 s [gammaloop-workspace-clippy] Checking siphasher v1.0.2
  270. 24.91 s [gammaloop-workspace-clippy] Checking phf_shared v0.13.1
  271. 25.06 s [gammaloop-workspace-clippy] Checking titlecase v2.2.1
  272. 25.07 s [gammaloop-workspace-clippy] Checking tabled v0.20.0
  273. 25.15 s [gammaloop-workspace-clippy] Checking subprocess v0.2.15
  274. 25.20 s [gammaloop-workspace-clippy] Checking rust_lisp v0.18.0
  275. 25.21 s [gammaloop-workspace-clippy] Compiling vakint v0.1.2 (/build/source/crates/vakint)
  276. 25.26 s [gammaloop-workspace-clippy] Checking phf v0.13.1
  277. 25.61 s [gammaloop-workspace-clippy] Checking version-compare v0.2.1
  278. 25.69 s [gammaloop-workspace-clippy] Checking xpct v0.5.1
  279. 25.70 s [gammaloop-workspace-clippy] Checking ryu v1.0.23
  280. 25.82 s [gammaloop-workspace-clippy] Checking castaway v0.2.4
  281. 25.89 s [gammaloop-workspace-clippy] Checking toml_datetime v0.7.5+spec-1.1.0
  282. 25.90 s [gammaloop-workspace-clippy] Checking strum v0.27.2
  283. 25.91 s [gammaloop-workspace-clippy] Checking unicode-truncate v2.0.1
  284. 26.03 s [gammaloop-workspace-clippy] Checking kasuari v0.4.12
  285. 26.11 s [gammaloop-workspace-clippy] Checking lru v0.16.4
  286. 26.21 s [gammaloop-workspace-clippy] Checking string-template-plus v0.4.3
  287. 26.24 s [gammaloop-workspace-clippy] Checking toml v0.9.12+spec-1.1.0
  288. 26.26 s [gammaloop-workspace-clippy] Checking compact_str v0.9.0
  289. 26.30 s [gammaloop-workspace-clippy] Checking vte v0.15.0
  290. 26.36 s [gammaloop-workspace-clippy] Checking portable-atomic v1.13.1
  291. 26.45 s [gammaloop-workspace-clippy] Checking vt100 v0.16.2
  292. 26.46 s [gammaloop-workspace-clippy] Compiling pyo3-ffi v0.28.3
  293. 26.48 s [gammaloop-workspace-clippy] Compiling pyo3-macros-backend v0.28.3
  294. 26.85 s [gammaloop-workspace-clippy] Compiling pyo3 v0.28.3
  295. 27.10 s [gammaloop-workspace-clippy] Compiling numpy v0.28.0
  296. 27.10 s [gammaloop-workspace-clippy] Checking toml v0.8.23
  297. 27.19 s [gammaloop-workspace-clippy] Checking ratatui-core v0.1.0
  298. 27.21 s [gammaloop-workspace-clippy] Checking unit-prefix v0.5.2
  299. 27.29 s [gammaloop-workspace-clippy] Checking rand_distr v0.4.3
  300. 27.31 s [gammaloop-workspace-clippy] Checking env_logger v0.11.10
  301. 27.38 s [gammaloop-workspace-clippy] Checking simba v0.6.0
  302. 27.39 s [gammaloop-workspace-clippy] Checking line-clipping v0.3.7
  303. 27.41 s [gammaloop-workspace-clippy] Checking gimli v0.32.3
  304. 27.60 s [gammaloop-workspace-clippy] Compiling rustpython-parser-core v0.4.0
  305. 27.66 s [gammaloop-workspace-clippy] Checking indicatif v0.18.4
  306. 27.66 s [gammaloop-workspace-clippy] Compiling three-dimensional-reps v0.1.0 (/build/source/crates/three-dimensional-reps)
  307. 27.74 s [gammaloop-workspace-clippy] Checking adler2 v2.0.1
  308. 27.82 s [gammaloop-workspace-clippy] Checking figment v0.10.19
  309. 27.84 s [gammaloop-workspace-clippy] Checking miniz_oxide v0.8.9
  310. 28.01 s [gammaloop-workspace-clippy] Compiling rustpython-ast v0.4.0
  311. 28.17 s [gammaloop-workspace-clippy] Checking thiserror v1.0.69
  312. 28.18 s [gammaloop-workspace-clippy] Checking derive_builder v0.11.2
  313. 28.28 s [gammaloop-workspace-clippy] Checking object v0.37.3
  314. 28.38 s [gammaloop-workspace-clippy] Checking crossterm v0.29.0
  315. 28.38 s [gammaloop-workspace-clippy] Checking owo-colors v4.3.0
  316. 28.43 s [gammaloop-workspace-clippy] Checking ratatui-widgets v0.3.0
  317. 28.57 s [gammaloop-workspace-clippy] Checking tracing-error v0.2.1
  318. 28.57 s [gammaloop-workspace-clippy] Checking typed-index-collections v3.5.0
  319. 28.62 s [gammaloop-workspace-clippy] Checking serde-big-array v0.5.1
  320. 28.96 s [gammaloop-workspace-clippy] Checking amd v0.2.2
  321. 29.06 s [gammaloop-workspace-clippy] Checking itertools v0.11.0
  322. 29.21 s [gammaloop-workspace-clippy] Compiling gammaloop-tracing-filter-macros v0.1.0 (/build/source/crates/gammaloop-tracing-filter-macros)
  323. 29.24 s [gammaloop-workspace-clippy] Checking option-ext v0.2.0
  324. 29.33 s [gammaloop-workspace-clippy] Checking rustc-demangle v0.1.27
  325. 29.39 s [gammaloop-workspace-clippy] Checking dirs-sys v0.5.0
  326. 29.45 s [gammaloop-workspace-clippy] Checking ref-cast v1.0.25
  327. 29.55 s [gammaloop-workspace-clippy] Checking nix v0.31.2
  328. 29.56 s [gammaloop-workspace-clippy] Checking integer-sqrt v0.1.5
  329. 29.60 s [gammaloop-workspace-clippy] Checking brotli-decompressor v4.0.3
  330. 29.68 s [gammaloop-workspace-clippy] Checking itertools v0.12.1
  331. 29.77 s [gammaloop-workspace-clippy] Checking crossbeam-channel v0.5.15
  332. 29.99 s [gammaloop-workspace-clippy] Compiling gammalooprs v0.3.4 (/build/source/crates/gammalooprs)
  333. 30.47 s [gammaloop-workspace-clippy] Checking color-spantrace v0.3.0
  334. 30.50 s [gammaloop-workspace-clippy] Checking rkyv v0.7.46
  335. 30.58 s [gammaloop-workspace-clippy] Checking ratatui-crossterm v0.1.0
  336. 30.93 s [gammaloop-workspace-clippy] Checking addr2line v0.25.1
  337. 30.96 s [gammaloop-workspace-clippy] Checking symlink v0.1.0
  338. 31.01 s [gammaloop-workspace-clippy] Checking clarabel v0.11.1
  339. 31.03 s [gammaloop-workspace-clippy] Checking unsafe-libyaml v0.2.11
  340. 31.05 s [gammaloop-workspace-clippy] Checking include_dir v0.7.4
  341. 31.13 s [gammaloop-workspace-clippy] Checking ctrlc v3.5.2
  342. 31.18 s [gammaloop-workspace-clippy] Checking pathfinding v4.15.0
  343. 31.35 s [gammaloop-workspace-clippy] Checking dirs v6.0.0
  344. 31.36 s [gammaloop-workspace-clippy] Checking ratatui-macros v0.7.0
  345. 31.46 s [gammaloop-workspace-clippy] Checking schemars v1.2.1
  346. 31.46 s [gammaloop-workspace-clippy] Checking ratatui v0.30.0
  347. 31.56 s [gammaloop-workspace-clippy] Checking slotmap v1.1.1
  348. 31.63 s [gammaloop-workspace-clippy] Checking tracing-appender v0.2.5
  349. 31.74 s [gammaloop-workspace-clippy] Checking tracing-indicatif v0.3.14
  350. 32.13 s [gammaloop-workspace-clippy] Checking json5 v0.4.1
  351. 32.30 s [gammaloop-workspace-clippy] Checking vectorize v0.2.0
  352. 32.42 s [gammaloop-workspace-clippy] Checking base62 v2.2.4
  353. 32.62 s [gammaloop-workspace-clippy] Checking serde_yaml v0.9.34+deprecated
  354. 32.63 s [gammaloop-workspace-clippy] Checking ringbuffer v0.16.0
  355. 32.64 s [gammaloop-workspace-clippy] Checking rust-embed v8.11.0
  356. 32.91 s [gammaloop-workspace-clippy] Checking brotli v7.0.0
  357. 32.91 s [gammaloop-workspace-clippy] Checking clap_complete v4.6.3
  358. 32.95 s [gammaloop-workspace-clippy] Checking strip-ansi-escapes v0.2.1
  359. 33.04 s [gammaloop-workspace-clippy] Checking fd-lock v4.0.4
  360. 33.18 s [gammaloop-workspace-clippy] Compiling gammaloop-api v0.1.0 (/build/source/crates/gammaloop-api)
  361. 33.19 s [gammaloop-workspace-clippy] Checking itertools v0.13.0
  362. 33.21 s [gammaloop-workspace-clippy] Checking strum v0.26.3
  363. 33.24 s [gammaloop-workspace-clippy] Checking clap_complete_nushell v4.6.0
  364. 33.32 s [gammaloop-workspace-clippy] Checking sysinfo v0.33.1
  365. 33.41 s [gammaloop-workspace-clippy] Checking shlex v1.3.0
  366. 33.60 s [gammaloop-workspace-clippy] Checking futures-task v0.3.32
  367. 33.69 s [gammaloop-workspace-clippy] Checking slab v0.4.12
  368. 33.69 s [gammaloop-workspace-clippy] Checking futures-core v0.3.32
  369. 33.71 s [gammaloop-workspace-clippy] Checking sdd v3.0.10
  370. 33.89 s [gammaloop-workspace-clippy] Compiling gammaloop-integration-tests v0.1.0 (/build/source/tests)
  371. 33.91 s [gammaloop-workspace-clippy] Compiling test-log-core v0.2.20
  372. 33.93 s [gammaloop-workspace-clippy] Checking scc v2.4.0
  373. 34.13 s [gammaloop-workspace-clippy] Compiling rustc_version v0.4.1
  374. 34.14 s [gammaloop-workspace-clippy] Checking futures-util v0.3.32
  375. 35.06 s [gammaloop-workspace-clippy] Checking which v8.0.2
  376. 35.18 s [gammaloop-workspace-clippy] Checking bincode v1.3.3
  377. 35.55 s [gammaloop-workspace-clippy] Compiling gungraun-macros v0.8.0
  378. 35.73 s [gammaloop-workspace-clippy] Compiling gungraun-runner v0.18.2
  379. 35.96 s [gammaloop-workspace-clippy] Checking reedline v0.42.0
  380. 36.03 s [gammaloop-workspace-clippy] Compiling numerica v2.2.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  381. 36.29 s [gammaloop-workspace-clippy] Checking nalgebra v0.29.0
  382. 37.38 s [gammaloop-workspace-clippy] Checking futures-executor v0.3.32
  383. 37.41 s [gammaloop-workspace-clippy] Checking backtrace v0.3.76
  384. 37.56 s [gammaloop-workspace-clippy] Checking proc-macro2 v1.0.106
  385. 38.16 s [gammaloop-workspace-clippy] Checking serial_test v3.4.0
  386. 38.21 s [gammaloop-workspace-clippy] Checking color-eyre v0.6.5
  387. 38.33 s [gammaloop-workspace-clippy] Checking base64 v0.21.7
  388. 38.42 s [gammaloop-workspace-clippy] Checking quote v1.0.45
  389. 38.51 s [gammaloop-workspace-clippy] Checking maplit v1.0.2
  390. 38.63 s [gammaloop-workspace-clippy] Compiling iai-callgrind-runner v0.14.2
  391. 38.65 s [gammaloop-workspace-clippy] Checking kurbo v0.13.0
  392. 38.70 s [gammaloop-workspace-clippy] Checking wait-timeout v0.2.1
  393. 38.86 s [gammaloop-workspace-clippy] Checking bit-vec v0.8.0
  394. 39.03 s [gammaloop-workspace-clippy] Compiling iai-callgrind v0.14.2
  395. 39.29 s [gammaloop-workspace-clippy] Checking quick-error v1.2.3
  396. 39.33 s [gammaloop-workspace-clippy] Checking bit-set v0.8.0
  397. 39.38 s [gammaloop-workspace-clippy] Checking rusty-fork v0.3.1
  398. 39.50 s [gammaloop-workspace-clippy] Checking syn v2.0.117
  399. 39.52 s [gammaloop-workspace-clippy] Checking ron v0.8.1
  400. 39.53 s [gammaloop-workspace-clippy] Compiling iai-callgrind-macros v0.5.1
  401. 39.71 s [gammaloop-workspace-clippy] Checking rand_xorshift v0.4.0
  402. 39.90 s [gammaloop-workspace-clippy] Checking console v0.15.11
  403. 40.23 s [gammaloop-workspace-clippy] Checking unarray v0.1.4
  404. 40.34 s [gammaloop-workspace-clippy] Checking pathdiff v0.2.3
  405. 40.43 s [gammaloop-workspace-clippy] Checking similar-asserts v1.7.0
  406. 40.64 s [gammaloop-workspace-clippy] Checking proptest v1.11.0
  407. 40.75 s [gammaloop-workspace-clippy] Compiling test-log-macros v0.2.20
  408. 40.83 s [gammaloop-workspace-clippy] Checking clinnet v0.1.8 (/build/source/crates/clinnet)
  409. 41.11 s [gammaloop-workspace-clippy] Checking kurvst v0.1.0 (/build/source/crates/kurvst)
  410. 46.02 s [gammaloop-workspace-clippy] Checking test-log v0.2.20
  411. 50.35 s [gammaloop-workspace-clippy] Compiling graphica v2.1.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  412. 51.94 s [gammaloop-workspace-clippy] Checking statrs v0.16.1
  413. 52.18 s [gammaloop-workspace-clippy] Checking gungraun v0.18.2
  414. 52.64 s [gammaloop-workspace-clippy] Checking momtrop v0.3.0
  415. 58.10 s [gammaloop-workspace-clippy] Compiling pyo3-stub-gen-derive v0.17.2
  416. 58.71 s [gammaloop-workspace-clippy] Compiling pyo3-macros v0.28.3
  417. 65.52 s [gammaloop-workspace-clippy] Checking pyo3-stub-gen v0.17.2
  418. 70.95 s [gammaloop-workspace-clippy] Checking symbolica-utils v0.1.0 (/build/source/crates/symbolica-utils)
  419. 70.95 s [gammaloop-workspace-clippy] Checking spenso-macros v0.3.2 (/build/source/crates/spenso-macros)
  420. 230.79 s [gammaloop-workspace-clippy] Compiling gammaloop-workspace-hack v0.1.0 (/build/source/crates/gammaloop-workspace-hack)
  421. 230.99 s [gammaloop-workspace-clippy] Checking linnet v0.17.0 (/build/source/crates/linnet)
  422. 234.93 s [gammaloop-workspace-clippy] Checking spenso v0.6.0 (/build/source/crates/spenso)
  423. 235.03 s [gammaloop-workspace-clippy] Checking linnet-py v0.1.0 (/build/source/crates/linnet-py)
  424. 235.03 s [gammaloop-workspace-clippy] Checking linnest v0.1.0 (/build/source/crates/linnest)
  425. 240.16 s [gammaloop-workspace-clippy] Checking idenso v0.3.0 (/build/source/crates/idenso)
  426. 240.16 s [gammaloop-workspace-clippy] Checking gammaloop-tracing-filter v0.1.0 (/build/source/crates/gammaloop-tracing-filter)
  427. 242.03 s [gammaloop-workspace-clippy] Checking spenso-hep-lib v0.1.7 (/build/source/crates/spenso-hep-lib)
  428. 242.18 s [gammaloop-workspace-clippy] Checking spynso3 v0.1.2 (/build/source/crates/spynso3)
  429. 262.89 s [gammaloop-workspace-clippy] error: manual implementation of an assign operation
  430. 262.89 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/gammaloop_sample.rs:755:21
  431. 262.89 s [gammaloop-workspace-clippy] |
  432. 262.89 s [gammaloop-workspace-clippy] 755 | sample.sample.jacobian = sample.sample.jacobian * F::from_f64(partition_weight);
  433. 262.89 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace it with: `sample.sample.jacobian *= F::from_f64(partition_weight)`
  434. 262.89 s [gammaloop-workspace-clippy] |
  435. 262.89 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#assign_op_pattern
  436. 262.89 s [gammaloop-workspace-clippy] = note: `-D clippy::assign-op-pattern` implied by `-D warnings`
  437. 262.89 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::assign_op_pattern)]`
  438. 262.89 s [gammaloop-workspace-clippy]
  439. 263.04 s [gammaloop-workspace-clippy] error: doc list item without indentation
  440. 263.04 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:311:5
  441. 263.04 s [gammaloop-workspace-clippy] |
  442. 263.04 s [gammaloop-workspace-clippy] 311 | /// a selected LMB into a parent frame; graph code supplies the matrix and
  443. 263.04 s [gammaloop-workspace-clippy] | ^
  444. 263.04 s [gammaloop-workspace-clippy] |
  445. 263.04 s [gammaloop-workspace-clippy] = help: if this is supposed to be its own paragraph, add a blank line
  446. 263.04 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#doc_lazy_continuation
  447. 263.04 s [gammaloop-workspace-clippy] = note: `-D clippy::doc-lazy-continuation` implied by `-D warnings`
  448. 263.04 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::doc_lazy_continuation)]`
  449. 263.04 s [gammaloop-workspace-clippy] help: indent this line
  450. 263.04 s [gammaloop-workspace-clippy] |
  451. 263.04 s [gammaloop-workspace-clippy] 311 | /// a selected LMB into a parent frame; graph code supplies the matrix and
  452. 263.04 s [gammaloop-workspace-clippy] | ++
  453. 263.04 s [gammaloop-workspace-clippy]
  454. 263.04 s [gammaloop-workspace-clippy] error: doc list item without indentation
  455. 263.04 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:312:5
  456. 263.04 s [gammaloop-workspace-clippy] |
  457. 263.04 s [gammaloop-workspace-clippy] 312 | /// translation after resolving the relevant edge signatures and external data.
  458. 263.04 s [gammaloop-workspace-clippy] | ^
  459. 263.04 s [gammaloop-workspace-clippy] |
  460. 263.04 s [gammaloop-workspace-clippy] = help: if this is supposed to be its own paragraph, add a blank line
  461. 263.04 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#doc_lazy_continuation
  462. 263.04 s [gammaloop-workspace-clippy] help: indent this line
  463. 263.04 s [gammaloop-workspace-clippy] |
  464. 263.04 s [gammaloop-workspace-clippy] 312 | /// translation after resolving the relevant edge signatures and external data.
  465. 263.04 s [gammaloop-workspace-clippy] | ++
  466. 263.04 s [gammaloop-workspace-clippy]
  467. 263.04 s [gammaloop-workspace-clippy] error: the loop variable `column` is only used to index `augmented`
  468. 263.04 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:404:31
  469. 263.04 s [gammaloop-workspace-clippy] |
  470. 263.04 s [gammaloop-workspace-clippy] 404 | for column in 0..2 * dimension {
  471. 263.04 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^
  472. 263.04 s [gammaloop-workspace-clippy] |
  473. 263.04 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#needless_range_loop
  474. 263.04 s [gammaloop-workspace-clippy] = note: `-D clippy::needless-range-loop` implied by `-D warnings`
  475. 263.04 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::needless_range_loop)]`
  476. 263.04 s [gammaloop-workspace-clippy] help: consider using an iterator
  477. 263.04 s [gammaloop-workspace-clippy] |
  478. 263.04 s [gammaloop-workspace-clippy] 404 - for column in 0..2 * dimension {
  479. 263.04 s [gammaloop-workspace-clippy] 404 + for <item> in augmented.iter_mut().take(2 * dimension) {
  480. 263.04 s [gammaloop-workspace-clippy] |
  481. 263.04 s [gammaloop-workspace-clippy]
  482. 263.08 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  483. 263.08 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:1915:9
  484. 263.08 s [gammaloop-workspace-clippy] |
  485. 263.08 s [gammaloop-workspace-clippy] 1915 | / if let SamplingMapDefinition::Lmb(edges) = &definition {
  486. 263.08 s [gammaloop-workspace-clippy] 1916 | | if edges.len() != n_loop_momenta {
  487. 263.08 s [gammaloop-workspace-clippy] 1917 | | return Err(eyre!(
  488. 263.08 s [gammaloop-workspace-clippy] 1918 | | "lmb definition has {} edges, but the kernel has {} loop coordinates",
  489. 263.08 s [gammaloop-workspace-clippy] ... |
  490. 263.08 s [gammaloop-workspace-clippy] 1923 | | }
  491. 263.08 s [gammaloop-workspace-clippy] | |_________^
  492. 263.08 s [gammaloop-workspace-clippy] |
  493. 263.08 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  494. 263.08 s [gammaloop-workspace-clippy] = note: `-D clippy::collapsible-if` implied by `-D warnings`
  495. 263.08 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::collapsible_if)]`
  496. 263.08 s [gammaloop-workspace-clippy] help: collapse nested if block
  497. 263.08 s [gammaloop-workspace-clippy] |
  498. 263.08 s [gammaloop-workspace-clippy] 1915 ~ if let SamplingMapDefinition::Lmb(edges) = &definition
  499. 263.08 s [gammaloop-workspace-clippy] 1916 ~ && edges.len() != n_loop_momenta {
  500. 263.08 s [gammaloop-workspace-clippy] 1917 | return Err(eyre!(
  501. 263.08 s [gammaloop-workspace-clippy] ...
  502. 263.08 s [gammaloop-workspace-clippy] 1921 | ));
  503. 263.08 s [gammaloop-workspace-clippy] 1922 ~ }
  504. 263.08 s [gammaloop-workspace-clippy] |
  505. 263.08 s [gammaloop-workspace-clippy]
  506. 263.11 s [gammaloop-workspace-clippy] error: manual implementation of `.is_multiple_of()`
  507. 263.11 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_reference.rs:135:12
  508. 263.11 s [gammaloop-workspace-clippy] |
  509. 263.11 s [gammaloop-workspace-clippy] 135 | if center.len() % 3 != 0 {
  510. 263.11 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^ help: replace with: `!center.len().is_multiple_of(3)`
  511. 263.11 s [gammaloop-workspace-clippy] |
  512. 263.11 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#manual_is_multiple_of
  513. 263.11 s [gammaloop-workspace-clippy] = note: `-D clippy::manual-is-multiple-of` implied by `-D warnings`
  514. 263.11 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::manual_is_multiple_of)]`
  515. 263.11 s [gammaloop-workspace-clippy]
  516. 263.14 s [gammaloop-workspace-clippy] error: manual implementation of `.is_multiple_of()`
  517. 263.14 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:758:47
  518. 263.14 s [gammaloop-workspace-clippy] |
  519. 263.14 s [gammaloop-workspace-clippy] 758 | if self.raw_coordinates.is_empty() || self.raw_coordinates.len() % 3 != 0 {
  520. 263.14 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `!self.raw_coordinates.len().is_multiple_of(3)`
  521. 263.14 s [gammaloop-workspace-clippy] |
  522. 263.14 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#manual_is_multiple_of
  523. 263.14 s [gammaloop-workspace-clippy]
  524. 263.15 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  525. 263.15 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1214:5
  526. 263.15 s [gammaloop-workspace-clippy] |
  527. 263.15 s [gammaloop-workspace-clippy] 1214 | / if let Some(graph_id) = context.graph_id {
  528. 263.15 s [gammaloop-workspace-clippy] 1215 | | if graph_id != prepared.graph_id {
  529. 263.15 s [gammaloop-workspace-clippy] 1216 | | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  530. 263.15 s [gammaloop-workspace-clippy] 1217 | | channel: channel.to_owned(),
  531. 263.15 s [gammaloop-workspace-clippy] ... |
  532. 263.15 s [gammaloop-workspace-clippy] 1224 | | }
  533. 263.15 s [gammaloop-workspace-clippy] | |_____^
  534. 263.15 s [gammaloop-workspace-clippy] |
  535. 263.15 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  536. 263.15 s [gammaloop-workspace-clippy] help: collapse nested if block
  537. 263.15 s [gammaloop-workspace-clippy] |
  538. 263.15 s [gammaloop-workspace-clippy] 1214 ~ if let Some(graph_id) = context.graph_id
  539. 263.15 s [gammaloop-workspace-clippy] 1215 ~ && graph_id != prepared.graph_id {
  540. 263.15 s [gammaloop-workspace-clippy] 1216 | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  541. 263.15 s [gammaloop-workspace-clippy] ...
  542. 263.15 s [gammaloop-workspace-clippy] 1222 | });
  543. 263.15 s [gammaloop-workspace-clippy] 1223 ~ }
  544. 263.15 s [gammaloop-workspace-clippy] |
  545. 263.15 s [gammaloop-workspace-clippy]
  546. 263.16 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  547. 263.16 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1234:5
  548. 263.16 s [gammaloop-workspace-clippy] |
  549. 263.16 s [gammaloop-workspace-clippy] 1234 | / if let Some(cut_id) = context.cut_id {
  550. 263.16 s [gammaloop-workspace-clippy] 1235 | | if cut_id != prepared.cut_id {
  551. 263.16 s [gammaloop-workspace-clippy] 1236 | | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  552. 263.16 s [gammaloop-workspace-clippy] 1237 | | channel: channel.to_owned(),
  553. 263.16 s [gammaloop-workspace-clippy] ... |
  554. 263.16 s [gammaloop-workspace-clippy] 1244 | | }
  555. 263.16 s [gammaloop-workspace-clippy] | |_____^
  556. 263.16 s [gammaloop-workspace-clippy] |
  557. 263.16 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  558. 263.16 s [gammaloop-workspace-clippy] help: collapse nested if block
  559. 263.16 s [gammaloop-workspace-clippy] |
  560. 263.16 s [gammaloop-workspace-clippy] 1234 ~ if let Some(cut_id) = context.cut_id
  561. 263.16 s [gammaloop-workspace-clippy] 1235 ~ && cut_id != prepared.cut_id {
  562. 263.16 s [gammaloop-workspace-clippy] 1236 | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  563. 263.16 s [gammaloop-workspace-clippy] ...
  564. 263.16 s [gammaloop-workspace-clippy] 1242 | });
  565. 263.16 s [gammaloop-workspace-clippy] 1243 ~ }
  566. 263.16 s [gammaloop-workspace-clippy] |
  567. 263.16 s [gammaloop-workspace-clippy]
  568. 263.16 s [gammaloop-workspace-clippy] error: very complex type used. Consider factoring parts into `type` definitions
  569. 263.16 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1543:6
  570. 263.16 s [gammaloop-workspace-clippy] |
  571. 263.16 s [gammaloop-workspace-clippy] 1543 | ) -> Result<
  572. 263.16 s [gammaloop-workspace-clippy] | ______^
  573. 263.16 s [gammaloop-workspace-clippy] 1544 | | (
  574. 263.16 s [gammaloop-workspace-clippy] 1545 | | Vec<Box<dyn SamplingMapComponent>>,
  575. 263.16 s [gammaloop-workspace-clippy] 1546 | | Vec<Vec<usize>>,
  576. 263.16 s [gammaloop-workspace-clippy] ... |
  577. 263.16 s [gammaloop-workspace-clippy] 1549 | | SamplingChannelCompileError,
  578. 263.16 s [gammaloop-workspace-clippy] 1550 | | > {
  579. 263.16 s [gammaloop-workspace-clippy] | |_^
  580. 263.16 s [gammaloop-workspace-clippy] |
  581. 263.16 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#type_complexity
  582. 263.16 s [gammaloop-workspace-clippy] = note: `-D clippy::type-complexity` implied by `-D warnings`
  583. 263.16 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::type_complexity)]`
  584. 263.16 s [gammaloop-workspace-clippy]
  585. 263.18 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  586. 263.18 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2224:13
  587. 263.18 s [gammaloop-workspace-clippy] |
  588. 263.18 s [gammaloop-workspace-clippy] 2224 | / if let SamplingChannelSelector::Named(name) = selector {
  589. 263.18 s [gammaloop-workspace-clippy] 2225 | | if let Some(channel) = resolved.named(name) {
  590. 263.18 s [gammaloop-workspace-clippy] 2226 | | let entry = SamplingCatalogueEntry::Named(channel.clone());
  591. 263.18 s [gammaloop-workspace-clippy] 2227 | | if !entries.contains(&entry) {
  592. 263.19 s [gammaloop-workspace-clippy] ... |
  593. 263.19 s [gammaloop-workspace-clippy] 2231 | | }
  594. 263.19 s [gammaloop-workspace-clippy] | |_____________^
  595. 263.19 s [gammaloop-workspace-clippy] |
  596. 263.19 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  597. 263.19 s [gammaloop-workspace-clippy] help: collapse nested if block
  598. 263.19 s [gammaloop-workspace-clippy] |
  599. 263.19 s [gammaloop-workspace-clippy] 2224 ~ if let SamplingChannelSelector::Named(name) = selector
  600. 263.19 s [gammaloop-workspace-clippy] 2225 ~ && let Some(channel) = resolved.named(name) {
  601. 263.19 s [gammaloop-workspace-clippy] 2226 | let entry = SamplingCatalogueEntry::Named(channel.clone());
  602. 263.19 s [gammaloop-workspace-clippy] ...
  603. 263.19 s [gammaloop-workspace-clippy] 2229 | }
  604. 263.19 s [gammaloop-workspace-clippy] 2230 ~ }
  605. 263.19 s [gammaloop-workspace-clippy] |
  606. 263.19 s [gammaloop-workspace-clippy]
  607. 263.19 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  608. 263.19 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2249:13
  609. 263.19 s [gammaloop-workspace-clippy] |
  610. 263.19 s [gammaloop-workspace-clippy] 2249 | / if basis_ids.is_empty() && optimized_lmbs.is_empty() {
  611. 263.19 s [gammaloop-workspace-clippy] 2250 | | if let Some((basis_id, _)) = all_lmbs.first() {
  612. 263.19 s [gammaloop-workspace-clippy] 2251 | | basis_ids.push(*basis_id);
  613. 263.19 s [gammaloop-workspace-clippy] 2252 | | }
  614. 263.19 s [gammaloop-workspace-clippy] 2253 | | }
  615. 263.19 s [gammaloop-workspace-clippy] | |_____________^
  616. 263.19 s [gammaloop-workspace-clippy] |
  617. 263.19 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  618. 263.19 s [gammaloop-workspace-clippy] help: collapse nested if block
  619. 263.19 s [gammaloop-workspace-clippy] |
  620. 263.19 s [gammaloop-workspace-clippy] 2249 ~ if basis_ids.is_empty() && optimized_lmbs.is_empty()
  621. 263.19 s [gammaloop-workspace-clippy] 2250 ~ && let Some((basis_id, _)) = all_lmbs.first() {
  622. 263.19 s [gammaloop-workspace-clippy] 2251 | basis_ids.push(*basis_id);
  623. 263.19 s [gammaloop-workspace-clippy] 2252 ~ }
  624. 263.19 s [gammaloop-workspace-clippy] |
  625. 263.19 s [gammaloop-workspace-clippy]
  626. 263.30 s [gammaloop-workspace-clippy] error: using `clone` on type `Complex<F<f64>>` which implements the `Copy` trait
  627. 263.30 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:160:32
  628. 263.30 s [gammaloop-workspace-clippy] |
  629. 263.30 s [gammaloop-workspace-clippy] 160 | value: value.values[0].clone(),
  630. 263.30 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `value.values[0]`
  631. 263.30 s [gammaloop-workspace-clippy] |
  632. 263.30 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  633. 263.30 s [gammaloop-workspace-clippy] = note: `-D clippy::clone-on-copy` implied by `-D warnings`
  634. 263.30 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::clone_on_copy)]`
  635. 263.30 s [gammaloop-workspace-clippy]
  636. 263.31 s [gammaloop-workspace-clippy] error: the loop variable `column` is only used to index `work`
  637. 263.31 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:324:27
  638. 263.31 s [gammaloop-workspace-clippy] |
  639. 263.31 s [gammaloop-workspace-clippy] 324 | for column in (pivot + 1)..dimension {
  640. 263.31 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^
  641. 263.31 s [gammaloop-workspace-clippy] |
  642. 263.31 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#needless_range_loop
  643. 263.31 s [gammaloop-workspace-clippy] help: consider using an iterator
  644. 263.31 s [gammaloop-workspace-clippy] |
  645. 263.31 s [gammaloop-workspace-clippy] 324 - for column in (pivot + 1)..dimension {
  646. 263.31 s [gammaloop-workspace-clippy] 324 + for <item> in work.iter_mut().take(dimension).skip((pivot + 1)) {
  647. 263.31 s [gammaloop-workspace-clippy] |
  648. 263.31 s [gammaloop-workspace-clippy]
  649. 263.90 s [gammaloop-workspace-clippy] error: you seem to be trying to use `match` to destructure a single infallible pattern. Consider using `let`
  650. 263.90 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrate/mod.rs:3342:5
  651. 263.90 s [gammaloop-workspace-clippy] |
  652. 263.90 s [gammaloop-workspace-clippy] 3342 | / let process_integrand = match integrand {
  653. 263.90 s [gammaloop-workspace-clippy] 3343 | | Integrand::ProcessIntegrand(process_integrand) => process_integrand,
  654. 263.90 s [gammaloop-workspace-clippy] 3344 | | #[cfg(test)]
  655. 263.90 s [gammaloop-workspace-clippy] 3345 | | Integrand::TestProbe(_) => return Vec::new(),
  656. 263.90 s [gammaloop-workspace-clippy] 3346 | | };
  657. 263.90 s [gammaloop-workspace-clippy] | |______^ help: try: `let Integrand::ProcessIntegrand(process_integrand) = integrand;`
  658. 263.90 s [gammaloop-workspace-clippy] |
  659. 263.90 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#infallible_destructuring_match
  660. 263.90 s [gammaloop-workspace-clippy] = note: `-D clippy::infallible-destructuring-match` implied by `-D warnings`
  661. 263.90 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::infallible_destructuring_match)]`
  662. 263.90 s [gammaloop-workspace-clippy]
  663. 263.90 s [gammaloop-workspace-clippy] error: you seem to be trying to use `match` to destructure a single infallible pattern. Consider using `let`
  664. 263.90 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrate/mod.rs:3359:5
  665. 263.90 s [gammaloop-workspace-clippy] |
  666. 263.90 s [gammaloop-workspace-clippy] 3359 | / let process_integrand = match integrand {
  667. 263.90 s [gammaloop-workspace-clippy] 3360 | | Integrand::ProcessIntegrand(process_integrand) => process_integrand,
  668. 263.90 s [gammaloop-workspace-clippy] 3361 | | #[cfg(test)]
  669. 263.90 s [gammaloop-workspace-clippy] 3362 | | Integrand::TestProbe(_) => return false,
  670. 263.90 s [gammaloop-workspace-clippy] 3363 | | };
  671. 263.90 s [gammaloop-workspace-clippy] | |______^ help: try: `let Integrand::ProcessIntegrand(process_integrand) = integrand;`
  672. 263.90 s [gammaloop-workspace-clippy] |
  673. 263.90 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#infallible_destructuring_match
  674. 263.90 s [gammaloop-workspace-clippy]
  675. 266.09 s [gammaloop-workspace-clippy] error: this `impl` can be derived
  676. 266.09 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/settings/runtime.rs:1259:1
  677. 266.09 s [gammaloop-workspace-clippy] |
  678. 266.09 s [gammaloop-workspace-clippy] 1259 | / impl Default for SamplingChannelDefinition {
  679. 266.09 s [gammaloop-workspace-clippy] 1260 | | fn default() -> Self {
  680. 266.09 s [gammaloop-workspace-clippy] 1261 | | Self {
  681. 266.09 s [gammaloop-workspace-clippy] 1262 | | around: String::new(),
  682. 266.09 s [gammaloop-workspace-clippy] ... |
  683. 266.09 s [gammaloop-workspace-clippy] 1268 | | }
  684. 266.09 s [gammaloop-workspace-clippy] | |_^
  685. 266.09 s [gammaloop-workspace-clippy] |
  686. 266.09 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#derivable_impls
  687. 266.09 s [gammaloop-workspace-clippy] = note: `-D clippy::derivable-impls` implied by `-D warnings`
  688. 266.09 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::derivable_impls)]`
  689. 266.09 s [gammaloop-workspace-clippy] help: replace the manual implementation with a derive attribute
  690. 266.09 s [gammaloop-workspace-clippy] |
  691. 266.09 s [gammaloop-workspace-clippy] 1249 + #[derive(Default)]
  692. 266.09 s [gammaloop-workspace-clippy] 1250 | pub struct SamplingChannelDefinition {
  693. 266.09 s [gammaloop-workspace-clippy] |
  694. 266.09 s [gammaloop-workspace-clippy]
  695. 266.10 s [gammaloop-workspace-clippy] error: this `impl` can be derived
  696. 266.10 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/settings/runtime.rs:1285:1
  697. 266.10 s [gammaloop-workspace-clippy] |
  698. 266.10 s [gammaloop-workspace-clippy] 1285 | / impl Default for SamplingChannelSelection {
  699. 266.10 s [gammaloop-workspace-clippy] 1286 | | fn default() -> Self {
  700. 266.10 s [gammaloop-workspace-clippy] 1287 | | Self {
  701. 266.10 s [gammaloop-workspace-clippy] 1288 | | weight: SamplingChannelWeight::default(),
  702. 266.10 s [gammaloop-workspace-clippy] ... |
  703. 266.10 s [gammaloop-workspace-clippy] 1294 | | }
  704. 266.10 s [gammaloop-workspace-clippy] | |_^
  705. 266.10 s [gammaloop-workspace-clippy] |
  706. 266.10 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#derivable_impls
  707. 266.10 s [gammaloop-workspace-clippy] help: replace the manual implementation with a derive attribute
  708. 266.10 s [gammaloop-workspace-clippy] |
  709. 266.10 s [gammaloop-workspace-clippy] 1277 + #[derive(Default)]
  710. 266.10 s [gammaloop-workspace-clippy] 1278 | pub struct SamplingChannelSelection {
  711. 266.10 s [gammaloop-workspace-clippy] |
  712. 266.10 s [gammaloop-workspace-clippy]
  713. 268.31 s [gammaloop-workspace-clippy] error: could not compile `gammalooprs` (lib) due to 18 previous errors
  714. 268.31 s [gammaloop-workspace-clippy] warning: build failed, waiting for other jobs to finish...
  715. 270.26 s [gammaloop-workspace-clippy] error: using `clone` on type `F<f64>` which implements the `Copy` trait
  716. 270.26 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:2358:14
  717. 270.26 s [gammaloop-workspace-clippy] |
  718. 270.26 s [gammaloop-workspace-clippy] 2358 | (point.jacobian.clone() * point.inverse_jacobian.clone() - F(1.0)).abs() < F(1.0e-12)
  719. 270.26 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `point.jacobian`
  720. 270.26 s [gammaloop-workspace-clippy] |
  721. 270.26 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  722. 270.26 s [gammaloop-workspace-clippy] = note: `-D clippy::clone-on-copy` implied by `-D warnings`
  723. 270.26 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::clone_on_copy)]`
  724. 270.26 s [gammaloop-workspace-clippy]
  725. 270.26 s [gammaloop-workspace-clippy] error: using `clone` on type `F<f64>` which implements the `Copy` trait
  726. 270.26 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:2358:39
  727. 270.26 s [gammaloop-workspace-clippy] |
  728. 270.26 s [gammaloop-workspace-clippy] 2358 | (point.jacobian.clone() * point.inverse_jacobian.clone() - F(1.0)).abs() < F(1.0e-12)
  729. 270.26 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `point.inverse_jacobian`
  730. 270.26 s [gammaloop-workspace-clippy] |
  731. 270.26 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  732. 270.26 s [gammaloop-workspace-clippy]
  733. 270.40 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  734. 270.40 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2725:9
  735. 270.40 s [gammaloop-workspace-clippy] |
  736. 270.40 s [gammaloop-workspace-clippy] 2725 | selection.default_channel_selection = vec!["missing".into()];
  737. 270.40 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  738. 270.40 s [gammaloop-workspace-clippy] |
  739. 270.40 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["missing".into()], ..Default::default() }` and removing relevant reassignments
  740. 270.40 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2724:9
  741. 270.40 s [gammaloop-workspace-clippy] |
  742. 270.40 s [gammaloop-workspace-clippy] 2724 | let mut selection = SamplingChannelSelection::default();
  743. 270.40 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  744. 270.40 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  745. 270.40 s [gammaloop-workspace-clippy] = note: `-D clippy::field-reassign-with-default` implied by `-D warnings`
  746. 270.40 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::field_reassign_with_default)]`
  747. 270.40 s [gammaloop-workspace-clippy]
  748. 270.40 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  749. 270.40 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2745:9
  750. 270.40 s [gammaloop-workspace-clippy] |
  751. 270.40 s [gammaloop-workspace-clippy] 2745 | selection.default_channel_selection = vec!["named".into()];
  752. 270.40 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  753. 270.40 s [gammaloop-workspace-clippy] |
  754. 270.40 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["named".into()], ..Default::default() }` and removing relevant reassignments
  755. 270.40 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2744:9
  756. 270.40 s [gammaloop-workspace-clippy] |
  757. 270.40 s [gammaloop-workspace-clippy] 2744 | let mut selection = SamplingChannelSelection::default();
  758. 270.40 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  759. 270.40 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  760. 270.40 s [gammaloop-workspace-clippy]
  761. 270.40 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  762. 270.40 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2768:9
  763. 270.40 s [gammaloop-workspace-clippy] |
  764. 270.40 s [gammaloop-workspace-clippy] 2768 | selection.default_channel_selection = vec!["threshold".into()];
  765. 270.40 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  766. 270.40 s [gammaloop-workspace-clippy] |
  767. 270.40 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  768. 270.40 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2767:9
  769. 270.40 s [gammaloop-workspace-clippy] |
  770. 270.40 s [gammaloop-workspace-clippy] 2767 | let mut selection = SamplingChannelSelection::default();
  771. 270.40 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  772. 270.40 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  773. 270.40 s [gammaloop-workspace-clippy]
  774. 270.40 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  775. 270.40 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2820:9
  776. 270.40 s [gammaloop-workspace-clippy] |
  777. 270.40 s [gammaloop-workspace-clippy] 2820 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  778. 270.40 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  779. 270.40 s [gammaloop-workspace-clippy] |
  780. 270.40 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  781. 270.40 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2819:9
  782. 270.40 s [gammaloop-workspace-clippy] |
  783. 270.40 s [gammaloop-workspace-clippy] 2819 | let mut selection = SamplingChannelSelection::default();
  784. 270.40 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  785. 270.40 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  786. 270.40 s [gammaloop-workspace-clippy]
  787. 270.40 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  788. 270.40 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2837:9
  789. 270.40 s [gammaloop-workspace-clippy] |
  790. 270.40 s [gammaloop-workspace-clippy] 2837 | selection.default_channel_selection = vec!["auto:surfaces".into(), "auto:lmb".into()];
  791. 270.40 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  792. 270.40 s [gammaloop-workspace-clippy] |
  793. 270.40 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:surfaces".into(), "auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  794. 270.40 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2836:9
  795. 270.40 s [gammaloop-workspace-clippy] |
  796. 270.40 s [gammaloop-workspace-clippy] 2836 | let mut selection = SamplingChannelSelection::default();
  797. 270.40 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  798. 270.40 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  799. 270.40 s [gammaloop-workspace-clippy]
  800. 270.40 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  801. 270.40 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2847:9
  802. 270.40 s [gammaloop-workspace-clippy] |
  803. 270.40 s [gammaloop-workspace-clippy] 2847 | selection.default_channel_selection = vec!["auto:surfaces".into()];
  804. 270.40 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  805. 270.40 s [gammaloop-workspace-clippy] |
  806. 270.40 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:surfaces".into()], ..Default::default() }` and removing relevant reassignments
  807. 270.40 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2846:9
  808. 270.40 s [gammaloop-workspace-clippy] |
  809. 270.40 s [gammaloop-workspace-clippy] 2846 | let mut selection = SamplingChannelSelection::default();
  810. 270.40 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  811. 270.40 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  812. 270.40 s [gammaloop-workspace-clippy]
  813. 270.41 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  814. 270.41 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2868:13
  815. 270.41 s [gammaloop-workspace-clippy] |
  816. 270.41 s [gammaloop-workspace-clippy] 2868 | selection.default_channel_selection = vec![preset.into()];
  817. 270.41 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  818. 270.41 s [gammaloop-workspace-clippy] |
  819. 270.41 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec![preset.into()], ..Default::default() }` and removing relevant reassignments
  820. 270.41 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2867:13
  821. 270.41 s [gammaloop-workspace-clippy] |
  822. 270.41 s [gammaloop-workspace-clippy] 2867 | let mut selection = SamplingChannelSelection::default();
  823. 270.41 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  824. 270.41 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  825. 270.41 s [gammaloop-workspace-clippy]
  826. 270.41 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  827. 270.41 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2899:9
  828. 270.41 s [gammaloop-workspace-clippy] |
  829. 270.41 s [gammaloop-workspace-clippy] 2899 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  830. 270.41 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  831. 270.41 s [gammaloop-workspace-clippy] |
  832. 270.41 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  833. 270.41 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2898:9
  834. 270.41 s [gammaloop-workspace-clippy] |
  835. 270.41 s [gammaloop-workspace-clippy] 2898 | let mut selection = SamplingChannelSelection::default();
  836. 270.41 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  837. 270.41 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  838. 270.41 s [gammaloop-workspace-clippy]
  839. 270.41 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  840. 270.41 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2981:13
  841. 270.41 s [gammaloop-workspace-clippy] |
  842. 270.41 s [gammaloop-workspace-clippy] 2981 | selection.default_channel_selection = vec![name.to_owned()];
  843. 270.41 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  844. 270.41 s [gammaloop-workspace-clippy] |
  845. 270.41 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec![name.to_owned()], ..Default::default() }` and removing relevant reassignments
  846. 270.41 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2980:13
  847. 270.41 s [gammaloop-workspace-clippy] |
  848. 270.41 s [gammaloop-workspace-clippy] 2980 | let mut selection = SamplingChannelSelection::default();
  849. 270.41 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  850. 270.41 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  851. 270.41 s [gammaloop-workspace-clippy]
  852. 270.41 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  853. 270.41 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3015:9
  854. 270.41 s [gammaloop-workspace-clippy] |
  855. 270.41 s [gammaloop-workspace-clippy] 3015 | selection.default_channel_selection = vec!["threshold".into()];
  856. 270.41 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  857. 270.41 s [gammaloop-workspace-clippy] |
  858. 270.41 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  859. 270.41 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3014:9
  860. 270.41 s [gammaloop-workspace-clippy] |
  861. 270.41 s [gammaloop-workspace-clippy] 3014 | let mut selection = SamplingChannelSelection::default();
  862. 270.41 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  863. 270.41 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  864. 270.41 s [gammaloop-workspace-clippy]
  865. 270.41 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  866. 270.41 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3060:9
  867. 270.41 s [gammaloop-workspace-clippy] |
  868. 270.41 s [gammaloop-workspace-clippy] 3060 | selection.default_channel_selection = vec!["conditional".into()];
  869. 270.41 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  870. 270.41 s [gammaloop-workspace-clippy] |
  871. 270.41 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["conditional".into()], ..Default::default() }` and removing relevant reassignments
  872. 270.41 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3059:9
  873. 270.41 s [gammaloop-workspace-clippy] |
  874. 270.41 s [gammaloop-workspace-clippy] 3059 | let mut selection = SamplingChannelSelection::default();
  875. 270.41 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  876. 270.41 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  877. 270.41 s [gammaloop-workspace-clippy]
  878. 270.42 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  879. 270.42 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3122:9
  880. 270.42 s [gammaloop-workspace-clippy] |
  881. 270.42 s [gammaloop-workspace-clippy] 3122 | selection.default_channel_selection = vec!["h".into(), "z".into()];
  882. 270.42 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  883. 270.42 s [gammaloop-workspace-clippy] |
  884. 270.42 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["h".into(), "z".into()], ..Default::default() }` and removing relevant reassignments
  885. 270.42 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3121:9
  886. 270.42 s [gammaloop-workspace-clippy] |
  887. 270.42 s [gammaloop-workspace-clippy] 3121 | let mut selection = SamplingChannelSelection::default();
  888. 270.42 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  889. 270.42 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  890. 270.42 s [gammaloop-workspace-clippy]
  891. 270.42 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  892. 270.42 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3166:9
  893. 270.42 s [gammaloop-workspace-clippy] |
  894. 270.42 s [gammaloop-workspace-clippy] 3166 | selection.default_channel_selection = vec!["auto:lmb".into()];
  895. 270.42 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  896. 270.42 s [gammaloop-workspace-clippy] |
  897. 270.42 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  898. 270.42 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3165:9
  899. 270.42 s [gammaloop-workspace-clippy] |
  900. 270.42 s [gammaloop-workspace-clippy] 3165 | let mut selection = SamplingChannelSelection::default();
  901. 270.42 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  902. 270.42 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  903. 270.42 s [gammaloop-workspace-clippy]
  904. 270.42 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  905. 270.42 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3188:9
  906. 270.42 s [gammaloop-workspace-clippy] |
  907. 270.42 s [gammaloop-workspace-clippy] 3188 | selection.default_channel_selection = vec!["auto:lmb".into()];
  908. 270.42 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  909. 270.42 s [gammaloop-workspace-clippy] |
  910. 270.42 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  911. 270.42 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3187:9
  912. 270.42 s [gammaloop-workspace-clippy] |
  913. 270.42 s [gammaloop-workspace-clippy] 3187 | let mut selection = SamplingChannelSelection::default();
  914. 270.42 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  915. 270.42 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  916. 270.42 s [gammaloop-workspace-clippy]
  917. 270.42 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  918. 270.42 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3240:9
  919. 270.42 s [gammaloop-workspace-clippy] |
  920. 270.42 s [gammaloop-workspace-clippy] 3240 | selection.default_channel_selection = vec!["named".into()];
  921. 270.42 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  922. 270.42 s [gammaloop-workspace-clippy] |
  923. 270.42 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["named".into()], ..Default::default() }` and removing relevant reassignments
  924. 270.42 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3239:9
  925. 270.42 s [gammaloop-workspace-clippy] |
  926. 270.42 s [gammaloop-workspace-clippy] 3239 | let mut selection = SamplingChannelSelection::default();
  927. 270.42 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  928. 270.42 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  929. 270.42 s [gammaloop-workspace-clippy]
  930. 270.43 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  931. 270.43 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3289:9
  932. 270.43 s [gammaloop-workspace-clippy] |
  933. 270.43 s [gammaloop-workspace-clippy] 3289 | selection.default_channel_selection = vec!["threshold".into()];
  934. 270.43 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  935. 270.43 s [gammaloop-workspace-clippy] |
  936. 270.43 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  937. 270.43 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3288:9
  938. 270.43 s [gammaloop-workspace-clippy] |
  939. 270.43 s [gammaloop-workspace-clippy] 3288 | let mut selection = SamplingChannelSelection::default();
  940. 270.43 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  941. 270.43 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  942. 270.43 s [gammaloop-workspace-clippy]
  943. 270.43 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  944. 270.43 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3336:9
  945. 270.43 s [gammaloop-workspace-clippy] |
  946. 270.43 s [gammaloop-workspace-clippy] 3336 | selection.default_channel_selection = vec!["cut_channel".into()];
  947. 270.43 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  948. 270.43 s [gammaloop-workspace-clippy] |
  949. 270.43 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_channel".into()], ..Default::default() }` and removing relevant reassignments
  950. 270.43 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3335:9
  951. 270.43 s [gammaloop-workspace-clippy] |
  952. 270.43 s [gammaloop-workspace-clippy] 3335 | let mut selection = SamplingChannelSelection::default();
  953. 270.43 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  954. 270.43 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  955. 270.43 s [gammaloop-workspace-clippy]
  956. 270.43 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  957. 270.43 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3366:9
  958. 270.43 s [gammaloop-workspace-clippy] |
  959. 270.43 s [gammaloop-workspace-clippy] 3366 | selection.default_channel_selection = vec!["right_channel".into()];
  960. 270.43 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  961. 270.43 s [gammaloop-workspace-clippy] |
  962. 270.43 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["right_channel".into()], ..Default::default() }` and removing relevant reassignments
  963. 270.43 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3365:9
  964. 270.43 s [gammaloop-workspace-clippy] |
  965. 270.43 s [gammaloop-workspace-clippy] 3365 | let mut selection = SamplingChannelSelection::default();
  966. 270.43 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  967. 270.43 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  968. 270.43 s [gammaloop-workspace-clippy]
  969. 270.43 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  970. 270.43 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3393:9
  971. 270.43 s [gammaloop-workspace-clippy] |
  972. 270.43 s [gammaloop-workspace-clippy] 3393 | selection.default_channel_selection = vec!["cut_chart".into()];
  973. 270.43 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  974. 270.43 s [gammaloop-workspace-clippy] |
  975. 270.43 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_chart".into()], ..Default::default() }` and removing relevant reassignments
  976. 270.43 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3392:9
  977. 270.43 s [gammaloop-workspace-clippy] |
  978. 270.43 s [gammaloop-workspace-clippy] 3392 | let mut selection = SamplingChannelSelection::default();
  979. 270.43 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  980. 270.43 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  981. 270.43 s [gammaloop-workspace-clippy]
  982. 270.43 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  983. 270.43 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3419:9
  984. 270.43 s [gammaloop-workspace-clippy] |
  985. 270.43 s [gammaloop-workspace-clippy] 3419 | selection.default_channel_selection = vec!["cut_chart".into()];
  986. 270.43 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  987. 270.43 s [gammaloop-workspace-clippy] |
  988. 270.43 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_chart".into()], ..Default::default() }` and removing relevant reassignments
  989. 270.43 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3418:9
  990. 270.43 s [gammaloop-workspace-clippy] |
  991. 270.43 s [gammaloop-workspace-clippy] 3418 | let mut selection = SamplingChannelSelection::default();
  992. 270.43 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  993. 270.43 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  994. 270.43 s [gammaloop-workspace-clippy]
  995. 270.43 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  996. 270.43 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3496:9
  997. 270.43 s [gammaloop-workspace-clippy] |
  998. 270.43 s [gammaloop-workspace-clippy] 3496 | selection.default_channel_selection = vec!["left_target".into()];
  999. 270.43 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1000. 270.43 s [gammaloop-workspace-clippy] |
  1001. 270.43 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["left_target".into()], ..Default::default() }` and removing relevant reassignments
  1002. 270.43 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3495:9
  1003. 270.43 s [gammaloop-workspace-clippy] |
  1004. 270.43 s [gammaloop-workspace-clippy] 3495 | let mut selection = SamplingChannelSelection::default();
  1005. 270.43 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1006. 270.43 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1007. 270.43 s [gammaloop-workspace-clippy]
  1008. 270.44 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1009. 270.44 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3540:9
  1010. 270.44 s [gammaloop-workspace-clippy] |
  1011. 270.44 s [gammaloop-workspace-clippy] 3540 | selection.default_channel_selection = vec!["threshold".into()];
  1012. 270.44 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1013. 270.44 s [gammaloop-workspace-clippy] |
  1014. 270.44 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  1015. 270.44 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3539:9
  1016. 270.44 s [gammaloop-workspace-clippy] |
  1017. 270.44 s [gammaloop-workspace-clippy] 3539 | let mut selection = SamplingChannelSelection::default();
  1018. 270.44 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1019. 270.44 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1020. 270.44 s [gammaloop-workspace-clippy]
  1021. 270.44 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1022. 270.44 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3564:9
  1023. 270.44 s [gammaloop-workspace-clippy] |
  1024. 270.44 s [gammaloop-workspace-clippy] 3564 | selection.default_channel_selection = vec!["joint".into()];
  1025. 270.44 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1026. 270.44 s [gammaloop-workspace-clippy] |
  1027. 270.44 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  1028. 270.44 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3563:9
  1029. 270.44 s [gammaloop-workspace-clippy] |
  1030. 270.44 s [gammaloop-workspace-clippy] 3563 | let mut selection = SamplingChannelSelection::default();
  1031. 270.44 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1032. 270.44 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1033. 270.44 s [gammaloop-workspace-clippy]
  1034. 270.44 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1035. 270.44 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3597:9
  1036. 270.44 s [gammaloop-workspace-clippy] |
  1037. 270.44 s [gammaloop-workspace-clippy] 3597 | selection.default_channel_selection = vec!["joint".into()];
  1038. 270.44 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1039. 270.44 s [gammaloop-workspace-clippy] |
  1040. 270.44 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  1041. 270.44 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3596:9
  1042. 270.44 s [gammaloop-workspace-clippy] |
  1043. 270.44 s [gammaloop-workspace-clippy] 3596 | let mut selection = SamplingChannelSelection::default();
  1044. 270.44 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1045. 270.44 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1046. 270.44 s [gammaloop-workspace-clippy]
  1047. 270.44 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1048. 270.44 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3654:9
  1049. 270.44 s [gammaloop-workspace-clippy] |
  1050. 270.44 s [gammaloop-workspace-clippy] 3654 | selection.default_channel_selection = vec!["joint".into()];
  1051. 270.44 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1052. 270.44 s [gammaloop-workspace-clippy] |
  1053. 270.44 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  1054. 270.44 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3653:9
  1055. 270.44 s [gammaloop-workspace-clippy] |
  1056. 270.44 s [gammaloop-workspace-clippy] 3653 | let mut selection = SamplingChannelSelection::default();
  1057. 270.44 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1058. 270.44 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1059. 270.44 s [gammaloop-workspace-clippy]
  1060. 270.45 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1061. 270.45 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3758:9
  1062. 270.45 s [gammaloop-workspace-clippy] |
  1063. 270.45 s [gammaloop-workspace-clippy] 3758 | selection.default_channel_selection = vec!["auto:lmb".into()];
  1064. 270.45 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1065. 270.45 s [gammaloop-workspace-clippy] |
  1066. 270.45 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  1067. 270.45 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3757:9
  1068. 270.45 s [gammaloop-workspace-clippy] |
  1069. 270.45 s [gammaloop-workspace-clippy] 3757 | let mut selection = SamplingChannelSelection::default();
  1070. 270.45 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1071. 270.45 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1072. 270.45 s [gammaloop-workspace-clippy]
  1073. 270.45 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1074. 270.45 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3806:9
  1075. 270.45 s [gammaloop-workspace-clippy] |
  1076. 270.45 s [gammaloop-workspace-clippy] 3806 | selection.default_channel_selection = vec!["auto:lmb".into()];
  1077. 270.45 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1078. 270.45 s [gammaloop-workspace-clippy] |
  1079. 270.45 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  1080. 270.45 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3805:9
  1081. 270.45 s [gammaloop-workspace-clippy] |
  1082. 270.45 s [gammaloop-workspace-clippy] 3805 | let mut selection = SamplingChannelSelection::default();
  1083. 270.45 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1084. 270.45 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1085. 270.45 s [gammaloop-workspace-clippy]
  1086. 270.45 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1087. 270.45 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3838:9
  1088. 270.45 s [gammaloop-workspace-clippy] |
  1089. 270.45 s [gammaloop-workspace-clippy] 3838 | selection.default_channel_selection = vec!["auto:lmb".into()];
  1090. 270.45 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1091. 270.45 s [gammaloop-workspace-clippy] |
  1092. 270.45 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  1093. 270.45 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3837:9
  1094. 270.45 s [gammaloop-workspace-clippy] |
  1095. 270.45 s [gammaloop-workspace-clippy] 3837 | let mut selection = SamplingChannelSelection::default();
  1096. 270.45 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1097. 270.45 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1098. 270.45 s [gammaloop-workspace-clippy]
  1099. 270.58 s [gammaloop-workspace-clippy] error: using `clone` on type `Complex<F<f64>>` which implements the `Copy` trait
  1100. 270.58 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:160:32
  1101. 270.58 s [gammaloop-workspace-clippy] |
  1102. 270.58 s [gammaloop-workspace-clippy] 160 | value: value.values[0].clone(),
  1103. 270.58 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `value.values[0]`
  1104. 270.58 s [gammaloop-workspace-clippy] |
  1105. 270.58 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  1106. 270.58 s [gammaloop-workspace-clippy]
  1107. 270.92 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1108. 270.92 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:5511:9
  1109. 270.92 s [gammaloop-workspace-clippy] |
  1110. 270.92 s [gammaloop-workspace-clippy] 5511 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  1111. 270.92 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1112. 270.92 s [gammaloop-workspace-clippy] |
  1113. 270.92 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  1114. 270.92 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:5510:9
  1115. 270.92 s [gammaloop-workspace-clippy] |
  1116. 270.92 s [gammaloop-workspace-clippy] 5510 | let mut selection = SamplingChannelSelection::default();
  1117. 270.92 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1118. 270.92 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1119. 270.92 s [gammaloop-workspace-clippy]
  1120. 270.92 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1121. 270.92 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:5514:9
  1122. 270.92 s [gammaloop-workspace-clippy] |
  1123. 270.92 s [gammaloop-workspace-clippy] 5514 | parameterization_settings.sampling_channels = selection;
  1124. 270.92 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1125. 270.92 s [gammaloop-workspace-clippy] |
  1126. 270.92 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::ParameterizationSettings { sampling_channels: selection, ..Default::default() }` and removing relevant reassignments
  1127. 270.92 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:5513:9
  1128. 270.92 s [gammaloop-workspace-clippy] |
  1129. 270.92 s [gammaloop-workspace-clippy] 5513 | let mut parameterization_settings = ParameterizationSettings::default();
  1130. 270.92 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1131. 270.92 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1132. 270.92 s [gammaloop-workspace-clippy]
  1133. 270.92 s [gammaloop-workspace-clippy] error: large size difference between variants
  1134. 270.92 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/mod.rs:54:1
  1135. 270.92 s [gammaloop-workspace-clippy] |
  1136. 270.92 s [gammaloop-workspace-clippy] 54 | / pub enum Integrand {
  1137. 270.92 s [gammaloop-workspace-clippy] 55 | | ProcessIntegrand(Box<ProcessIntegrand>),
  1138. 270.92 s [gammaloop-workspace-clippy] | | --------------------------------------- the second-largest variant contains at least 8 bytes
  1139. 270.92 s [gammaloop-workspace-clippy] 56 | | #[cfg(test)]
  1140. 270.92 s [gammaloop-workspace-clippy] 57 | | TestProbe(TestProbeIntegrand),
  1141. 270.92 s [gammaloop-workspace-clippy] | | ----------------------------- the largest variant contains at least 888 bytes
  1142. 270.92 s [gammaloop-workspace-clippy] 58 | | }
  1143. 270.92 s [gammaloop-workspace-clippy] | |_^ the entire enum is at least 888 bytes
  1144. 270.92 s [gammaloop-workspace-clippy] |
  1145. 270.93 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#large_enum_variant
  1146. 270.93 s [gammaloop-workspace-clippy] = note: `-D clippy::large-enum-variant` implied by `-D warnings`
  1147. 270.93 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::large_enum_variant)]`
  1148. 270.93 s [gammaloop-workspace-clippy] help: consider boxing the large fields or introducing indirection in some other way to reduce the total size of the enum
  1149. 270.93 s [gammaloop-workspace-clippy] |
  1150. 270.93 s [gammaloop-workspace-clippy] 57 - TestProbe(TestProbeIntegrand),
  1151. 270.93 s [gammaloop-workspace-clippy] 57 + TestProbe(Box<TestProbeIntegrand>),
  1152. 270.93 s [gammaloop-workspace-clippy] |
  1153. 270.93 s [gammaloop-workspace-clippy]
  1154. 276.97 s [gammaloop-workspace-clippy] error: could not compile `gammalooprs` (lib test) due to 49 previous errors
  1155. 277.48 s Progress: 0 of 1 built (1 failed)
  1156. 277.48 s Failed to build gammaloop-workspace-clippy after 4m34s
  1157. 277.49 s Cannot build '/nix/store/l6s72cbhcyppdy6qmrlx5xxbmnbpfaza-gammaloop-workspace-clippy-0.1.0.drv'.
  1158. 277.49 s Reason: builder failed with exit code 101.
  1159. 277.49 s Output paths:
  1160. 277.49 s /nix/store/h2bgah92h8ylr1anyv7kxqrvljw93f9a-gammaloop-workspace-clippy-0.1.0
  1161. 277.49 s Last 1151 log lines:
  1162. 277.49 s > Running phase: unpackPhase
  1163. 277.49 s > unpacking source archive /nix/store/f4j1b4vzvikvpimn1dm8pnf1v07qz7i7-source
  1164. 277.49 s > source root is source
  1165. 277.49 s > Running phase: patchPhase
  1166. 277.49 s > Executing configureCargoCommonVars
  1167. 277.49 s > decompressing cargo artifacts from /nix/store/50vpxlcgfxf2d57i27v3d10zjwxxbm2r-gammaloop-workspace-deps-deps-0.1.0/target.tar.zst to target
  1168. 277.49 s > Running phase: updateAutotoolsGnuConfigScriptsPhase
  1169. 277.49 s > Running phase: configurePhase
  1170. 277.49 s > will append /build/source/.cargo-home/config.toml with contents of /nix/store/5drf77x6km4ky7gwlrzdx9bbd6fz09g3-vendor-cargo-deps/config.toml
  1171. 277.49 s > default configurePhase, nothing to do
  1172. 277.49 s > Running phase: buildPhase
  1173. 277.49 s > +++ command cargo --version
  1174. 277.49 s > cargo 1.97.0 (c980f4866 2026-06-30)
  1175. 277.49 s > +++ command cargo clippy --profile ci-optim --locked --workspace --features gammaloop-tracing-filter/clap,gammaloop-tracing-filter/symbolica,idenso/bincode,idenso/reference-cases,linnet/bincode,linnet/drawing,linnet/rkyv,linnet/serde,linnet/symbolica,spenso-macros/shadowing,spenso/shadowing,symbolica/tracing_max_level_info,three-dimensional-reps/display,three-dimensional-reps/eval,three-dimensional-reps/serde --all-targets --no-deps -- --deny warnings
  1176. 277.49 s > Checking cfg-if v1.0.4
  1177. 277.49 s > Checking memchr v2.8.0
  1178. 277.49 s > Checking once_cell v1.21.4
  1179. 277.49 s > Checking either v1.15.0
  1180. 277.49 s > Checking serde_core v1.0.228
  1181. 277.49 s > Checking libc v0.2.186
  1182. 277.49 s > Checking libm v0.2.16
  1183. 277.49 s > Checking itoa v1.0.18
  1184. 277.49 s > Checking log v0.4.29
  1185. 277.49 s > Checking regex-syntax v0.8.10
  1186. 277.49 s > Checking zerocopy v0.8.48
  1187. 277.49 s > Checking crossbeam-utils v0.8.21
  1188. 277.49 s > Checking equivalent v1.0.2
  1189. 277.49 s > Checking zmij v1.0.21
  1190. 277.49 s > Checking bytemuck v1.25.0
  1191. 277.49 s > Checking lazy_static v1.5.0
  1192. 277.49 s > Compiling target-lexicon v0.13.5
  1193. 277.49 s > Checking crossbeam-epoch v0.9.18
  1194. 277.49 s > Checking arrayvec v0.7.6
  1195. 277.49 s > Checking safe_arch v0.7.4
  1196. 277.49 s > Checking itertools v0.14.0
  1197. 277.49 s > Checking powerfmt v0.2.0
  1198. 277.49 s > Checking num-traits v0.2.19
  1199. 277.49 s > Checking aho-corasick v1.1.4
  1200. 277.49 s > Checking time-core v0.1.8
  1201. 277.49 s > Checking pin-project-lite v0.2.17
  1202. 277.49 s > Checking num_threads v0.1.7
  1203. 277.49 s > Checking num-conv v0.2.1
  1204. 277.49 s > Checking tracing-core v0.1.36
  1205. 277.49 s > Checking foldhash v0.2.0
  1206. 277.49 s > Checking deranged v0.5.8
  1207. 277.49 s > Checking allocator-api2 v0.2.21
  1208. 277.49 s > Checking const-random v0.1.18
  1209. 277.49 s > Checking static_assertions v1.1.0
  1210. 277.49 s > Checking nu-ansi-term v0.50.3
  1211. 277.49 s > Checking winnow v1.0.2
  1212. 277.49 s > Checking getrandom v0.3.4
  1213. 277.49 s > Checking unty v0.0.4
  1214. 277.49 s > Checking tracing v0.1.44
  1215. 277.49 s > Checking tracing-log v0.2.0
  1216. 277.49 s > Checking rand_core v0.9.5
  1217. 277.49 s > Checking wide v0.7.33
  1218. 277.49 s > Checking gmp-mpfr-sys v1.7.1
  1219. 277.49 s > Checking crossbeam-deque v0.8.6
  1220. 277.49 s > Checking sharded-slab v0.1.7
  1221. 277.49 s > Checking safe_arch v1.0.0
  1222. 277.49 s > Checking thread_local v1.1.9
  1223. 277.49 s > Checking rayon-core v1.13.0
  1224. 277.49 s > Checking hashbrown v0.16.1
  1225. 277.49 s > Checking az v1.3.0
  1226. 277.49 s > Checking toml_writer v1.1.1+spec-1.1.0
  1227. 277.49 s > Checking indenter v0.3.4
  1228. 277.49 s > Compiling phf_shared v0.11.3
  1229. 277.49 s > Checking anyhow v1.0.102
  1230. 277.49 s > Checking wide v1.3.0
  1231. 277.49 s > Checking rawpointer v0.2.1
  1232. 277.49 s > Checking alloc-no-stdlib v2.0.4
  1233. 277.49 s > Checking dyn-clone v1.0.20
  1234. 277.49 s > Checking rayon v1.12.0
  1235. 277.49 s > Checking utf8parse v0.2.2
  1236. 277.49 s > Checking anstyle-parse v1.0.0
  1237. 277.49 s > Checking toml_parser v1.1.2+spec-1.1.0
  1238. 277.49 s > Checking alloc-stdlib v0.2.2
  1239. 277.49 s > Checking matrixmultiply v0.3.10
  1240. 277.49 s > Checking anstyle v1.0.14
  1241. 277.49 s > Checking colored v3.1.1
  1242. 277.49 s > Checking is_terminal_polyfill v1.70.2
  1243. 277.49 s > Checking anstyle-query v1.1.5
  1244. 277.49 s > Checking serde v1.0.228
  1245. 277.49 s > Checking serde_json v1.0.149
  1246. 277.49 s > Checking bitflags v2.11.1
  1247. 277.49 s > Checking serde_spanned v1.1.1
  1248. 277.49 s > Checking toml_datetime v1.1.1+spec-1.1.0
  1249. 277.49 s > Checking colorchoice v1.0.5
  1250. 277.49 s > Checking approx v0.5.1
  1251. 277.49 s > Checking num-integer v0.1.46
  1252. 277.49 s > Checking anstream v1.0.0
  1253. 277.49 s > Compiling phf_generator v0.11.3
  1254. 277.49 s > Checking time v0.3.47
  1255. 277.49 s > Checking eyre v0.6.12
  1256. 277.49 s > Checking unicode-width v0.2.2
  1257. 277.49 s > Checking regex-automata v0.4.14
  1258. 277.49 s > Checking bitflags v1.3.2
  1259. 277.49 s > Checking region v3.0.2
  1260. 277.49 s > Checking brotli-decompressor v5.0.0
  1261. 277.49 s > Compiling pyo3-build-config v0.28.3
  1262. 277.49 s > Checking smallvec v1.15.1
  1263. 277.49 s > Checking num-complex v0.4.6
  1264. 277.49 s > Checking tracing-serde v0.2.0
  1265. 277.49 s > Checking bincode v2.0.1
  1266. 277.49 s > Compiling phf_codegen v0.11.3
  1267. 277.49 s > Checking toml v1.1.2+spec-1.1.0
  1268. 277.49 s > Checking wasmtime-jit-icache-coherence v34.0.2
  1269. 277.49 s > Checking hugepage-rs v0.1.1
  1270. 277.49 s > Checking inventory v0.3.24
  1271. 277.49 s > Checking spec_math v0.1.6
  1272. 277.49 s > Checking thiserror v2.0.18
  1273. 277.49 s > Checking smartstring v1.0.1
  1274. 277.49 s > Compiling getopts v0.2.24
  1275. 277.49 s > Checking libloading v0.9.0
  1276. 277.49 s > Checking bytes v1.11.1
  1277. 277.49 s > Checking byteorder v1.5.0
  1278. 277.49 s > Checking self_cell v1.2.2
  1279. 277.49 s > Checking append-only-vec v0.1.8
  1280. 277.49 s > Checking tinyjson v2.5.1
  1281. 277.49 s > Checking simba v0.9.1
  1282. 277.49 s > Compiling unicode_names2_generator v1.3.0
  1283. 277.49 s > Checking linux-raw-sys v0.12.1
  1284. 277.49 s > Compiling unic-char-range v0.9.0
  1285. 277.49 s > Compiling unic-common v0.9.0
  1286. 277.49 s > Compiling unic-char-property v0.9.0
  1287. 277.49 s > Compiling unic-ucd-version v0.9.0
  1288. 277.49 s > Compiling is-macro v0.3.7
  1289. 277.49 s > Compiling rustpython-parser-vendored v0.4.0
  1290. 277.49 s > Checking iana-time-zone v0.1.65
  1291. 277.49 s > Checking ppv-lite86 v0.2.21
  1292. 277.49 s > Checking ahash v0.8.12
  1293. 277.49 s > Checking brotli v8.0.2
  1294. 277.49 s > Checking chrono v0.4.44
  1295. 277.49 s > Compiling rustpython-parser v0.4.0
  1296. 277.49 s > Compiling phf v0.11.3
  1297. 277.49 s > Checking rand_chacha v0.9.0
  1298. 277.49 s > Checking rustc-hash v2.1.2
  1299. 277.49 s > Checking rustix v1.1.4
  1300. 277.49 s > Compiling unic-ucd-ident v0.9.0
  1301. 277.49 s > Compiling unic-emoji-char v0.9.0
  1302. 277.49 s > Checking ndarray v0.17.2
  1303. 277.49 s > Compiling rustc-hash v1.1.0
  1304. 277.49 s > Compiling lalrpop-util v0.20.2
  1305. 277.49 s > Checking rug v1.30.0
  1306. 277.49 s > Compiling symbolica v2.2.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  1307. 277.49 s > Checking unicode-segmentation v1.13.2
  1308. 277.49 s > Checking rand v0.9.4
  1309. 277.49 s > Checking typenum v1.20.0
  1310. 277.49 s > Checking getrandom v0.2.17
  1311. 277.49 s > Checking scopeguard v1.2.0
  1312. 277.49 s > Checking parking_lot_core v0.9.12
  1313. 277.49 s > Checking lock_api v0.4.14
  1314. 277.49 s > Checking unicode-ident v1.0.24
  1315. 277.49 s > Checking hashbrown v0.17.0
  1316. 277.49 s > Checking errno v0.3.14
  1317. 277.49 s > Checking terminal_size v0.4.4
  1318. 277.49 s > Checking parking_lot v0.12.5
  1319. 277.49 s > Checking clap_lex v1.1.0
  1320. 277.49 s > Checking strsim v0.11.1
  1321. 277.49 s > Checking unicase v2.9.0
  1322. 277.49 s > Checking signal-hook-registry v1.4.8
  1323. 277.49 s > Checking vte v0.14.1
  1324. 277.49 s > Checking symjit v2.21.0
  1325. 277.49 s > Checking same-file v1.0.6
  1326. 277.49 s > Checking signal-hook v0.3.18
  1327. 277.49 s > Checking indexmap v2.14.0
  1328. 277.49 s > Checking clap_builder v4.6.0
  1329. 277.49 s > Checking walkdir v2.5.0
  1330. 277.49 s > Checking half v2.7.1
  1331. 277.49 s > Checking matchers v0.2.0
  1332. 277.49 s > Checking regex v1.12.3
  1333. 277.49 s > Checking generic-array v0.14.7
  1334. 277.49 s > Checking mio v1.2.0
  1335. 277.49 s > Checking tracing-subscriber v0.3.23
  1336. 277.49 s > Checking ciborium-io v0.2.2
  1337. 277.49 s > Checking minimal-lexical v0.2.1
  1338. 277.49 s > Checking ciborium-ll v0.2.2
  1339. 277.49 s > Checking derive_more v2.1.1
  1340. 277.49 s > Checking signal-hook-mio v0.2.5
  1341. 277.49 s > Checking num-bigint v0.4.6
  1342. 277.49 s > Checking console v0.16.3
  1343. 277.49 s > Checking nom v7.1.3
  1344. 277.49 s > Checking bstr v1.12.1
  1345. 277.49 s > Checking block-buffer v0.10.4
  1346. 277.49 s > Checking crypto-common v0.1.7
  1347. 277.49 s > Checking digest v0.10.7
  1348. 277.49 s > Checking cpufeatures v0.2.17
  1349. 277.49 s > Checking winnow v0.7.15
  1350. 277.49 s > Checking linux-raw-sys v0.4.15
  1351. 277.49 s > Checking sha2 v0.10.9
  1352. 277.49 s > Checking globset v0.4.18
  1353. 277.49 s > Checking ciborium v0.2.2
  1354. 277.49 s > Checking rand_core v0.6.4
  1355. 277.49 s > Checking getrandom v0.4.2
  1356. 277.49 s > Checking rustix v0.38.44
  1357. 277.49 s > Checking plotters-backend v0.3.7
  1358. 277.49 s > Checking fastrand v2.4.1
  1359. 277.49 s > Checking fnv v1.0.7
  1360. 277.49 s > Checking tempfile v3.27.0
  1361. 277.49 s > Checking plotters-svg v0.3.7
  1362. 277.49 s > Checking xprec v0.2.2
  1363. 277.49 s > Checking rust-embed-utils v8.11.0
  1364. 277.49 s > Checking toml_datetime v0.6.11
  1365. 277.49 s > Compiling unicode_names2 v1.3.0
  1366. 277.49 s > Checking serde_spanned v0.6.9
  1367. 277.49 s > Checking itertools v0.10.5
  1368. 277.49 s > Checking cast v0.3.0
  1369. 277.49 s > Checking tap v1.0.1
  1370. 277.49 s > Checking toml_write v0.1.2
  1371. 277.49 s > Checking wyz v0.5.1
  1372. 277.49 s > Checking plotters v0.3.7
  1373. 277.49 s > Checking rand_chacha v0.3.1
  1374. 277.49 s > Checking radium v0.7.0
  1375. 277.49 s > Checking typeid v1.0.3
  1376. 277.49 s > Checking similar v2.7.0
  1377. 277.49 s > Checking crossterm v0.28.1
  1378. 277.49 s > Checking tinytemplate v1.2.1
  1379. 277.49 s > Checking is-terminal v0.4.17
  1380. 277.49 s > Checking anes v0.1.6
  1381. 277.49 s > Checking bytecount v0.6.9
  1382. 277.49 s > Checking oorandom v11.1.5
  1383. 277.49 s > Checking funty v2.0.0
  1384. 277.49 s > Checking rand v0.8.6
  1385. 277.49 s > Checking ansitok v0.3.0
  1386. 277.49 s > Checking ron v0.12.1
  1387. 277.49 s > Checking toml_edit v0.25.11+spec-1.1.0
  1388. 277.49 s > Checking clap v4.6.1
  1389. 277.49 s > Checking env_filter v1.0.1
  1390. 277.49 s > Checking uncased v0.9.10
  1391. 277.49 s > Checking ansi-str v0.9.0
  1392. 277.49 s > Checking testing_table v0.3.0
  1393. 277.49 s > Checking jiff v0.2.24
  1394. 277.49 s > Checking criterion-plot v0.5.0
  1395. 277.49 s > Checking ptr_meta v0.1.4
  1396. 277.49 s > Checking simdutf8 v0.1.5
  1397. 277.49 s > Checking bitvec v1.0.1
  1398. 277.49 s > Checking ucd-trie v0.1.7
  1399. 277.49 s > Checking ahash v0.7.8
  1400. 277.49 s > Checking pest v2.8.6
  1401. 277.49 s > Checking bytecheck v0.6.12
  1402. 277.49 s > Checking papergrid v0.17.0
  1403. 277.49 s > Checking hashbrown v0.12.3
  1404. 277.49 s > Checking approx v0.4.0
  1405. 277.49 s > Checking insta v1.47.2
  1406. 277.49 s > Checking seahash v4.1.0
  1407. 277.49 s > Checking criterion v0.5.1
  1408. 277.49 s > Checking cgmath v0.18.0
  1409. 277.49 s > Checking toml_edit v0.22.27
  1410. 277.49 s > Checking num-rational v0.4.2
  1411. 277.49 s > Checking num-iter v0.1.45
  1412. 277.49 s > Checking rend v0.4.2
  1413. 277.49 s > Checking ref-ops v0.2.5
  1414. 277.49 s > Checking num v0.4.3
  1415. 277.49 s > Checking rand_xoshiro v0.6.0
  1416. 277.49 s > Checking features v0.10.0
  1417. 277.49 s > Checking constcat v0.5.1
  1418. 277.49 s > Checking gat-lending-iterator v0.1.8
  1419. 277.49 s > Checking colored v2.2.0
  1420. 277.49 s > Checking constant_time_eq v0.4.2
  1421. 277.49 s > Checking cpufeatures v0.3.0
  1422. 277.49 s > Checking arrayref v0.3.9
  1423. 277.49 s > Checking dot-parser v0.5.1
  1424. 277.49 s > Checking base64 v0.22.1
  1425. 277.49 s > Checking joinery v2.1.0
  1426. 277.49 s > Checking blake3 v1.8.5
  1427. 277.49 s > Checking siphasher v1.0.2
  1428. 277.49 s > Checking phf_shared v0.13.1
  1429. 277.49 s > Checking titlecase v2.2.1
  1430. 277.49 s > Checking tabled v0.20.0
  1431. 277.49 s > Checking subprocess v0.2.15
  1432. 277.49 s > Checking rust_lisp v0.18.0
  1433. 277.49 s > Compiling vakint v0.1.2 (/build/source/crates/vakint)
  1434. 277.49 s > Checking phf v0.13.1
  1435. 277.49 s > Checking version-compare v0.2.1
  1436. 277.49 s > Checking xpct v0.5.1
  1437. 277.49 s > Checking ryu v1.0.23
  1438. 277.49 s > Checking castaway v0.2.4
  1439. 277.49 s > Checking toml_datetime v0.7.5+spec-1.1.0
  1440. 277.49 s > Checking strum v0.27.2
  1441. 277.49 s > Checking unicode-truncate v2.0.1
  1442. 277.49 s > Checking kasuari v0.4.12
  1443. 277.49 s > Checking lru v0.16.4
  1444. 277.49 s > Checking string-template-plus v0.4.3
  1445. 277.49 s > Checking toml v0.9.12+spec-1.1.0
  1446. 277.49 s > Checking compact_str v0.9.0
  1447. 277.49 s > Checking vte v0.15.0
  1448. 277.49 s > Checking portable-atomic v1.13.1
  1449. 277.49 s > Checking vt100 v0.16.2
  1450. 277.49 s > Compiling pyo3-ffi v0.28.3
  1451. 277.49 s > Compiling pyo3-macros-backend v0.28.3
  1452. 277.49 s > Compiling pyo3 v0.28.3
  1453. 277.49 s > Compiling numpy v0.28.0
  1454. 277.49 s > Checking toml v0.8.23
  1455. 277.49 s > Checking ratatui-core v0.1.0
  1456. 277.49 s > Checking unit-prefix v0.5.2
  1457. 277.49 s > Checking rand_distr v0.4.3
  1458. 277.49 s > Checking env_logger v0.11.10
  1459. 277.49 s > Checking simba v0.6.0
  1460. 277.49 s > Checking line-clipping v0.3.7
  1461. 277.49 s > Checking gimli v0.32.3
  1462. 277.49 s > Compiling rustpython-parser-core v0.4.0
  1463. 277.49 s > Checking indicatif v0.18.4
  1464. 277.49 s > Compiling three-dimensional-reps v0.1.0 (/build/source/crates/three-dimensional-reps)
  1465. 277.49 s > Checking adler2 v2.0.1
  1466. 277.49 s > Checking figment v0.10.19
  1467. 277.49 s > Checking miniz_oxide v0.8.9
  1468. 277.49 s > Compiling rustpython-ast v0.4.0
  1469. 277.49 s > Checking thiserror v1.0.69
  1470. 277.49 s > Checking derive_builder v0.11.2
  1471. 277.49 s > Checking object v0.37.3
  1472. 277.49 s > Checking crossterm v0.29.0
  1473. 277.49 s > Checking owo-colors v4.3.0
  1474. 277.49 s > Checking ratatui-widgets v0.3.0
  1475. 277.49 s > Checking tracing-error v0.2.1
  1476. 277.49 s > Checking typed-index-collections v3.5.0
  1477. 277.49 s > Checking serde-big-array v0.5.1
  1478. 277.49 s > Checking amd v0.2.2
  1479. 277.49 s > Checking itertools v0.11.0
  1480. 277.49 s > Compiling gammaloop-tracing-filter-macros v0.1.0 (/build/source/crates/gammaloop-tracing-filter-macros)
  1481. 277.49 s > Checking option-ext v0.2.0
  1482. 277.49 s > Checking rustc-demangle v0.1.27
  1483. 277.49 s > Checking dirs-sys v0.5.0
  1484. 277.49 s > Checking ref-cast v1.0.25
  1485. 277.49 s > Checking nix v0.31.2
  1486. 277.49 s > Checking integer-sqrt v0.1.5
  1487. 277.49 s > Checking brotli-decompressor v4.0.3
  1488. 277.49 s > Checking itertools v0.12.1
  1489. 277.49 s > Checking crossbeam-channel v0.5.15
  1490. 277.49 s > Compiling gammalooprs v0.3.4 (/build/source/crates/gammalooprs)
  1491. 277.49 s > Checking color-spantrace v0.3.0
  1492. 277.49 s > Checking rkyv v0.7.46
  1493. 277.49 s > Checking ratatui-crossterm v0.1.0
  1494. 277.49 s > Checking addr2line v0.25.1
  1495. 277.49 s > Checking symlink v0.1.0
  1496. 277.49 s > Checking clarabel v0.11.1
  1497. 277.49 s > Checking unsafe-libyaml v0.2.11
  1498. 277.49 s > Checking include_dir v0.7.4
  1499. 277.49 s > Checking ctrlc v3.5.2
  1500. 277.49 s > Checking pathfinding v4.15.0
  1501. 277.49 s > Checking dirs v6.0.0
  1502. 277.49 s > Checking ratatui-macros v0.7.0
  1503. 277.49 s > Checking schemars v1.2.1
  1504. 277.49 s > Checking ratatui v0.30.0
  1505. 277.49 s > Checking slotmap v1.1.1
  1506. 277.49 s > Checking tracing-appender v0.2.5
  1507. 277.49 s > Checking tracing-indicatif v0.3.14
  1508. 277.49 s > Checking json5 v0.4.1
  1509. 277.49 s > Checking vectorize v0.2.0
  1510. 277.49 s > Checking base62 v2.2.4
  1511. 277.49 s > Checking serde_yaml v0.9.34+deprecated
  1512. 277.49 s > Checking ringbuffer v0.16.0
  1513. 277.49 s > Checking rust-embed v8.11.0
  1514. 277.49 s > Checking brotli v7.0.0
  1515. 277.49 s > Checking clap_complete v4.6.3
  1516. 277.49 s > Checking strip-ansi-escapes v0.2.1
  1517. 277.49 s > Checking fd-lock v4.0.4
  1518. 277.49 s > Compiling gammaloop-api v0.1.0 (/build/source/crates/gammaloop-api)
  1519. 277.49 s > Checking itertools v0.13.0
  1520. 277.49 s > Checking strum v0.26.3
  1521. 277.49 s > Checking clap_complete_nushell v4.6.0
  1522. 277.49 s > Checking sysinfo v0.33.1
  1523. 277.49 s > Checking shlex v1.3.0
  1524. 277.49 s > Checking futures-task v0.3.32
  1525. 277.49 s > Checking slab v0.4.12
  1526. 277.49 s > Checking futures-core v0.3.32
  1527. 277.49 s > Checking sdd v3.0.10
  1528. 277.49 s > Compiling gammaloop-integration-tests v0.1.0 (/build/source/tests)
  1529. 277.49 s > Compiling test-log-core v0.2.20
  1530. 277.49 s > Checking scc v2.4.0
  1531. 277.49 s > Compiling rustc_version v0.4.1
  1532. 277.49 s > Checking futures-util v0.3.32
  1533. 277.49 s > Checking which v8.0.2
  1534. 277.49 s > Checking bincode v1.3.3
  1535. 277.49 s > Compiling gungraun-macros v0.8.0
  1536. 277.49 s > Compiling gungraun-runner v0.18.2
  1537. 277.49 s > Checking reedline v0.42.0
  1538. 277.49 s > Compiling numerica v2.2.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  1539. 277.49 s > Checking nalgebra v0.29.0
  1540. 277.49 s > Checking futures-executor v0.3.32
  1541. 277.49 s > Checking backtrace v0.3.76
  1542. 277.49 s > Checking proc-macro2 v1.0.106
  1543. 277.49 s > Checking serial_test v3.4.0
  1544. 277.49 s > Checking color-eyre v0.6.5
  1545. 277.49 s > Checking base64 v0.21.7
  1546. 277.49 s > Checking quote v1.0.45
  1547. 277.49 s > Checking maplit v1.0.2
  1548. 277.49 s > Compiling iai-callgrind-runner v0.14.2
  1549. 277.49 s > Checking kurbo v0.13.0
  1550. 277.49 s > Checking wait-timeout v0.2.1
  1551. 277.49 s > Checking bit-vec v0.8.0
  1552. 277.49 s > Compiling iai-callgrind v0.14.2
  1553. 277.49 s > Checking quick-error v1.2.3
  1554. 277.49 s > Checking bit-set v0.8.0
  1555. 277.49 s > Checking rusty-fork v0.3.1
  1556. 277.49 s > Checking syn v2.0.117
  1557. 277.49 s > Checking ron v0.8.1
  1558. 277.49 s > Compiling iai-callgrind-macros v0.5.1
  1559. 277.49 s > Checking rand_xorshift v0.4.0
  1560. 277.49 s > Checking console v0.15.11
  1561. 277.49 s > Checking unarray v0.1.4
  1562. 277.49 s > Checking pathdiff v0.2.3
  1563. 277.49 s > Checking similar-asserts v1.7.0
  1564. 277.49 s > Checking proptest v1.11.0
  1565. 277.49 s > Compiling test-log-macros v0.2.20
  1566. 277.49 s > Checking clinnet v0.1.8 (/build/source/crates/clinnet)
  1567. 277.49 s > Checking kurvst v0.1.0 (/build/source/crates/kurvst)
  1568. 277.49 s > Checking test-log v0.2.20
  1569. 277.49 s > Compiling graphica v2.1.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  1570. 277.49 s > Checking statrs v0.16.1
  1571. 277.49 s > Checking gungraun v0.18.2
  1572. 277.49 s > Checking momtrop v0.3.0
  1573. 277.49 s > Compiling pyo3-stub-gen-derive v0.17.2
  1574. 277.49 s > Compiling pyo3-macros v0.28.3
  1575. 277.49 s > Checking pyo3-stub-gen v0.17.2
  1576. 277.49 s > Checking symbolica-utils v0.1.0 (/build/source/crates/symbolica-utils)
  1577. 277.49 s > Checking spenso-macros v0.3.2 (/build/source/crates/spenso-macros)
  1578. 277.49 s > Compiling gammaloop-workspace-hack v0.1.0 (/build/source/crates/gammaloop-workspace-hack)
  1579. 277.49 s > Checking linnet v0.17.0 (/build/source/crates/linnet)
  1580. 277.49 s > Checking spenso v0.6.0 (/build/source/crates/spenso)
  1581. 277.49 s > Checking linnet-py v0.1.0 (/build/source/crates/linnet-py)
  1582. 277.49 s > Checking linnest v0.1.0 (/build/source/crates/linnest)
  1583. 277.49 s > Checking idenso v0.3.0 (/build/source/crates/idenso)
  1584. 277.49 s > Checking gammaloop-tracing-filter v0.1.0 (/build/source/crates/gammaloop-tracing-filter)
  1585. 277.49 s > Checking spenso-hep-lib v0.1.7 (/build/source/crates/spenso-hep-lib)
  1586. 277.49 s > Checking spynso3 v0.1.2 (/build/source/crates/spynso3)
  1587. 277.49 s > error: manual implementation of an assign operation
  1588. 277.49 s > --> crates/gammalooprs/src/integrands/process/gammaloop_sample.rs:755:21
  1589. 277.49 s > |
  1590. 277.49 s > 755 | sample.sample.jacobian = sample.sample.jacobian * F::from_f64(partition_weight);
  1591. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace it with: `sample.sample.jacobian *= F::from_f64(partition_weight)`
  1592. 277.49 s > |
  1593. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#assign_op_pattern
  1594. 277.49 s > = note: `-D clippy::assign-op-pattern` implied by `-D warnings`
  1595. 277.49 s > = help: to override `-D warnings` add `#[allow(clippy::assign_op_pattern)]`
  1596. 277.49 s >
  1597. 277.49 s > error: doc list item without indentation
  1598. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:311:5
  1599. 277.49 s > |
  1600. 277.49 s > 311 | /// a selected LMB into a parent frame; graph code supplies the matrix and
  1601. 277.49 s > | ^
  1602. 277.49 s > |
  1603. 277.49 s > = help: if this is supposed to be its own paragraph, add a blank line
  1604. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#doc_lazy_continuation
  1605. 277.49 s > = note: `-D clippy::doc-lazy-continuation` implied by `-D warnings`
  1606. 277.49 s > = help: to override `-D warnings` add `#[allow(clippy::doc_lazy_continuation)]`
  1607. 277.49 s > help: indent this line
  1608. 277.49 s > |
  1609. 277.49 s > 311 | /// a selected LMB into a parent frame; graph code supplies the matrix and
  1610. 277.49 s > | ++
  1611. 277.49 s >
  1612. 277.49 s > error: doc list item without indentation
  1613. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:312:5
  1614. 277.49 s > |
  1615. 277.49 s > 312 | /// translation after resolving the relevant edge signatures and external data.
  1616. 277.49 s > | ^
  1617. 277.49 s > |
  1618. 277.49 s > = help: if this is supposed to be its own paragraph, add a blank line
  1619. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#doc_lazy_continuation
  1620. 277.49 s > help: indent this line
  1621. 277.49 s > |
  1622. 277.49 s > 312 | /// translation after resolving the relevant edge signatures and external data.
  1623. 277.49 s > | ++
  1624. 277.49 s >
  1625. 277.49 s > error: the loop variable `column` is only used to index `augmented`
  1626. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:404:31
  1627. 277.49 s > |
  1628. 277.49 s > 404 | for column in 0..2 * dimension {
  1629. 277.49 s > | ^^^^^^^^^^^^^^^^
  1630. 277.49 s > |
  1631. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#needless_range_loop
  1632. 277.49 s > = note: `-D clippy::needless-range-loop` implied by `-D warnings`
  1633. 277.49 s > = help: to override `-D warnings` add `#[allow(clippy::needless_range_loop)]`
  1634. 277.49 s > help: consider using an iterator
  1635. 277.49 s > |
  1636. 277.49 s > 404 - for column in 0..2 * dimension {
  1637. 277.49 s > 404 + for <item> in augmented.iter_mut().take(2 * dimension) {
  1638. 277.49 s > |
  1639. 277.49 s >
  1640. 277.49 s > error: this `if` statement can be collapsed
  1641. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:1915:9
  1642. 277.49 s > |
  1643. 277.49 s > 1915 | / if let SamplingMapDefinition::Lmb(edges) = &definition {
  1644. 277.49 s > 1916 | | if edges.len() != n_loop_momenta {
  1645. 277.49 s > 1917 | | return Err(eyre!(
  1646. 277.49 s > 1918 | | "lmb definition has {} edges, but the kernel has {} loop coordinates",
  1647. 277.49 s > ... |
  1648. 277.49 s > 1923 | | }
  1649. 277.49 s > | |_________^
  1650. 277.49 s > |
  1651. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1652. 277.49 s > = note: `-D clippy::collapsible-if` implied by `-D warnings`
  1653. 277.49 s > = help: to override `-D warnings` add `#[allow(clippy::collapsible_if)]`
  1654. 277.49 s > help: collapse nested if block
  1655. 277.49 s > |
  1656. 277.49 s > 1915 ~ if let SamplingMapDefinition::Lmb(edges) = &definition
  1657. 277.49 s > 1916 ~ && edges.len() != n_loop_momenta {
  1658. 277.49 s > 1917 | return Err(eyre!(
  1659. 277.49 s > ...
  1660. 277.49 s > 1921 | ));
  1661. 277.49 s > 1922 ~ }
  1662. 277.49 s > |
  1663. 277.49 s >
  1664. 277.49 s > error: manual implementation of `.is_multiple_of()`
  1665. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_reference.rs:135:12
  1666. 277.49 s > |
  1667. 277.49 s > 135 | if center.len() % 3 != 0 {
  1668. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^ help: replace with: `!center.len().is_multiple_of(3)`
  1669. 277.49 s > |
  1670. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#manual_is_multiple_of
  1671. 277.49 s > = note: `-D clippy::manual-is-multiple-of` implied by `-D warnings`
  1672. 277.49 s > = help: to override `-D warnings` add `#[allow(clippy::manual_is_multiple_of)]`
  1673. 277.49 s >
  1674. 277.49 s > error: manual implementation of `.is_multiple_of()`
  1675. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:758:47
  1676. 277.49 s > |
  1677. 277.49 s > 758 | if self.raw_coordinates.is_empty() || self.raw_coordinates.len() % 3 != 0 {
  1678. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `!self.raw_coordinates.len().is_multiple_of(3)`
  1679. 277.49 s > |
  1680. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#manual_is_multiple_of
  1681. 277.49 s >
  1682. 277.49 s > error: this `if` statement can be collapsed
  1683. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1214:5
  1684. 277.49 s > |
  1685. 277.49 s > 1214 | / if let Some(graph_id) = context.graph_id {
  1686. 277.49 s > 1215 | | if graph_id != prepared.graph_id {
  1687. 277.49 s > 1216 | | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  1688. 277.49 s > 1217 | | channel: channel.to_owned(),
  1689. 277.49 s > ... |
  1690. 277.49 s > 1224 | | }
  1691. 277.49 s > | |_____^
  1692. 277.49 s > |
  1693. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1694. 277.49 s > help: collapse nested if block
  1695. 277.49 s > |
  1696. 277.49 s > 1214 ~ if let Some(graph_id) = context.graph_id
  1697. 277.49 s > 1215 ~ && graph_id != prepared.graph_id {
  1698. 277.49 s > 1216 | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  1699. 277.49 s > ...
  1700. 277.49 s > 1222 | });
  1701. 277.49 s > 1223 ~ }
  1702. 277.49 s > |
  1703. 277.49 s >
  1704. 277.49 s > error: this `if` statement can be collapsed
  1705. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1234:5
  1706. 277.49 s > |
  1707. 277.49 s > 1234 | / if let Some(cut_id) = context.cut_id {
  1708. 277.49 s > 1235 | | if cut_id != prepared.cut_id {
  1709. 277.49 s > 1236 | | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  1710. 277.49 s > 1237 | | channel: channel.to_owned(),
  1711. 277.49 s > ... |
  1712. 277.49 s > 1244 | | }
  1713. 277.49 s > | |_____^
  1714. 277.49 s > |
  1715. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1716. 277.49 s > help: collapse nested if block
  1717. 277.49 s > |
  1718. 277.49 s > 1234 ~ if let Some(cut_id) = context.cut_id
  1719. 277.49 s > 1235 ~ && cut_id != prepared.cut_id {
  1720. 277.49 s > 1236 | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  1721. 277.49 s > ...
  1722. 277.49 s > 1242 | });
  1723. 277.49 s > 1243 ~ }
  1724. 277.49 s > |
  1725. 277.49 s >
  1726. 277.49 s > error: very complex type used. Consider factoring parts into `type` definitions
  1727. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1543:6
  1728. 277.49 s > |
  1729. 277.49 s > 1543 | ) -> Result<
  1730. 277.49 s > | ______^
  1731. 277.49 s > 1544 | | (
  1732. 277.49 s > 1545 | | Vec<Box<dyn SamplingMapComponent>>,
  1733. 277.49 s > 1546 | | Vec<Vec<usize>>,
  1734. 277.49 s > ... |
  1735. 277.49 s > 1549 | | SamplingChannelCompileError,
  1736. 277.49 s > 1550 | | > {
  1737. 277.49 s > | |_^
  1738. 277.49 s > |
  1739. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#type_complexity
  1740. 277.49 s > = note: `-D clippy::type-complexity` implied by `-D warnings`
  1741. 277.49 s > = help: to override `-D warnings` add `#[allow(clippy::type_complexity)]`
  1742. 277.49 s >
  1743. 277.49 s > error: this `if` statement can be collapsed
  1744. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2224:13
  1745. 277.49 s > |
  1746. 277.49 s > 2224 | / if let SamplingChannelSelector::Named(name) = selector {
  1747. 277.49 s > 2225 | | if let Some(channel) = resolved.named(name) {
  1748. 277.49 s > 2226 | | let entry = SamplingCatalogueEntry::Named(channel.clone());
  1749. 277.49 s > 2227 | | if !entries.contains(&entry) {
  1750. 277.49 s > ... |
  1751. 277.49 s > 2231 | | }
  1752. 277.49 s > | |_____________^
  1753. 277.49 s > |
  1754. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1755. 277.49 s > help: collapse nested if block
  1756. 277.49 s > |
  1757. 277.49 s > 2224 ~ if let SamplingChannelSelector::Named(name) = selector
  1758. 277.49 s > 2225 ~ && let Some(channel) = resolved.named(name) {
  1759. 277.49 s > 2226 | let entry = SamplingCatalogueEntry::Named(channel.clone());
  1760. 277.49 s > ...
  1761. 277.49 s > 2229 | }
  1762. 277.49 s > 2230 ~ }
  1763. 277.49 s > |
  1764. 277.49 s >
  1765. 277.49 s > error: this `if` statement can be collapsed
  1766. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2249:13
  1767. 277.49 s > |
  1768. 277.49 s > 2249 | / if basis_ids.is_empty() && optimized_lmbs.is_empty() {
  1769. 277.49 s > 2250 | | if let Some((basis_id, _)) = all_lmbs.first() {
  1770. 277.49 s > 2251 | | basis_ids.push(*basis_id);
  1771. 277.49 s > 2252 | | }
  1772. 277.49 s > 2253 | | }
  1773. 277.49 s > | |_____________^
  1774. 277.49 s > |
  1775. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1776. 277.49 s > help: collapse nested if block
  1777. 277.49 s > |
  1778. 277.49 s > 2249 ~ if basis_ids.is_empty() && optimized_lmbs.is_empty()
  1779. 277.49 s > 2250 ~ && let Some((basis_id, _)) = all_lmbs.first() {
  1780. 277.49 s > 2251 | basis_ids.push(*basis_id);
  1781. 277.49 s > 2252 ~ }
  1782. 277.49 s > |
  1783. 277.49 s >
  1784. 277.49 s > error: using `clone` on type `Complex<F<f64>>` which implements the `Copy` trait
  1785. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:160:32
  1786. 277.49 s > |
  1787. 277.49 s > 160 | value: value.values[0].clone(),
  1788. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `value.values[0]`
  1789. 277.49 s > |
  1790. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  1791. 277.49 s > = note: `-D clippy::clone-on-copy` implied by `-D warnings`
  1792. 277.49 s > = help: to override `-D warnings` add `#[allow(clippy::clone_on_copy)]`
  1793. 277.49 s >
  1794. 277.49 s > error: the loop variable `column` is only used to index `work`
  1795. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:324:27
  1796. 277.49 s > |
  1797. 277.49 s > 324 | for column in (pivot + 1)..dimension {
  1798. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^
  1799. 277.49 s > |
  1800. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#needless_range_loop
  1801. 277.49 s > help: consider using an iterator
  1802. 277.49 s > |
  1803. 277.49 s > 324 - for column in (pivot + 1)..dimension {
  1804. 277.49 s > 324 + for <item> in work.iter_mut().take(dimension).skip((pivot + 1)) {
  1805. 277.49 s > |
  1806. 277.49 s >
  1807. 277.49 s > error: you seem to be trying to use `match` to destructure a single infallible pattern. Consider using `let`
  1808. 277.49 s > --> crates/gammalooprs/src/integrate/mod.rs:3342:5
  1809. 277.49 s > |
  1810. 277.49 s > 3342 | / let process_integrand = match integrand {
  1811. 277.49 s > 3343 | | Integrand::ProcessIntegrand(process_integrand) => process_integrand,
  1812. 277.49 s > 3344 | | #[cfg(test)]
  1813. 277.49 s > 3345 | | Integrand::TestProbe(_) => return Vec::new(),
  1814. 277.49 s > 3346 | | };
  1815. 277.49 s > | |______^ help: try: `let Integrand::ProcessIntegrand(process_integrand) = integrand;`
  1816. 277.49 s > |
  1817. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#infallible_destructuring_match
  1818. 277.49 s > = note: `-D clippy::infallible-destructuring-match` implied by `-D warnings`
  1819. 277.49 s > = help: to override `-D warnings` add `#[allow(clippy::infallible_destructuring_match)]`
  1820. 277.49 s >
  1821. 277.49 s > error: you seem to be trying to use `match` to destructure a single infallible pattern. Consider using `let`
  1822. 277.49 s > --> crates/gammalooprs/src/integrate/mod.rs:3359:5
  1823. 277.49 s > |
  1824. 277.49 s > 3359 | / let process_integrand = match integrand {
  1825. 277.49 s > 3360 | | Integrand::ProcessIntegrand(process_integrand) => process_integrand,
  1826. 277.49 s > 3361 | | #[cfg(test)]
  1827. 277.49 s > 3362 | | Integrand::TestProbe(_) => return false,
  1828. 277.49 s > 3363 | | };
  1829. 277.49 s > | |______^ help: try: `let Integrand::ProcessIntegrand(process_integrand) = integrand;`
  1830. 277.49 s > |
  1831. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#infallible_destructuring_match
  1832. 277.49 s >
  1833. 277.49 s > error: this `impl` can be derived
  1834. 277.49 s > --> crates/gammalooprs/src/settings/runtime.rs:1259:1
  1835. 277.49 s > |
  1836. 277.49 s > 1259 | / impl Default for SamplingChannelDefinition {
  1837. 277.49 s > 1260 | | fn default() -> Self {
  1838. 277.49 s > 1261 | | Self {
  1839. 277.49 s > 1262 | | around: String::new(),
  1840. 277.49 s > ... |
  1841. 277.49 s > 1268 | | }
  1842. 277.49 s > | |_^
  1843. 277.49 s > |
  1844. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#derivable_impls
  1845. 277.49 s > = note: `-D clippy::derivable-impls` implied by `-D warnings`
  1846. 277.49 s > = help: to override `-D warnings` add `#[allow(clippy::derivable_impls)]`
  1847. 277.49 s > help: replace the manual implementation with a derive attribute
  1848. 277.49 s > |
  1849. 277.49 s > 1249 + #[derive(Default)]
  1850. 277.49 s > 1250 | pub struct SamplingChannelDefinition {
  1851. 277.49 s > |
  1852. 277.49 s >
  1853. 277.49 s > error: this `impl` can be derived
  1854. 277.49 s > --> crates/gammalooprs/src/settings/runtime.rs:1285:1
  1855. 277.49 s > |
  1856. 277.49 s > 1285 | / impl Default for SamplingChannelSelection {
  1857. 277.49 s > 1286 | | fn default() -> Self {
  1858. 277.49 s > 1287 | | Self {
  1859. 277.49 s > 1288 | | weight: SamplingChannelWeight::default(),
  1860. 277.49 s > ... |
  1861. 277.49 s > 1294 | | }
  1862. 277.49 s > | |_^
  1863. 277.49 s > |
  1864. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#derivable_impls
  1865. 277.49 s > help: replace the manual implementation with a derive attribute
  1866. 277.49 s > |
  1867. 277.49 s > 1277 + #[derive(Default)]
  1868. 277.49 s > 1278 | pub struct SamplingChannelSelection {
  1869. 277.49 s > |
  1870. 277.49 s >
  1871. 277.49 s > error: could not compile `gammalooprs` (lib) due to 18 previous errors
  1872. 277.49 s > warning: build failed, waiting for other jobs to finish...
  1873. 277.49 s > error: using `clone` on type `F<f64>` which implements the `Copy` trait
  1874. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:2358:14
  1875. 277.49 s > |
  1876. 277.49 s > 2358 | (point.jacobian.clone() * point.inverse_jacobian.clone() - F(1.0)).abs() < F(1.0e-12)
  1877. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `point.jacobian`
  1878. 277.49 s > |
  1879. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  1880. 277.49 s > = note: `-D clippy::clone-on-copy` implied by `-D warnings`
  1881. 277.49 s > = help: to override `-D warnings` add `#[allow(clippy::clone_on_copy)]`
  1882. 277.49 s >
  1883. 277.49 s > error: using `clone` on type `F<f64>` which implements the `Copy` trait
  1884. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:2358:39
  1885. 277.49 s > |
  1886. 277.49 s > 2358 | (point.jacobian.clone() * point.inverse_jacobian.clone() - F(1.0)).abs() < F(1.0e-12)
  1887. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `point.inverse_jacobian`
  1888. 277.49 s > |
  1889. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  1890. 277.49 s >
  1891. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  1892. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2725:9
  1893. 277.49 s > |
  1894. 277.49 s > 2725 | selection.default_channel_selection = vec!["missing".into()];
  1895. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1896. 277.49 s > |
  1897. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["missing".into()], ..Default::default() }` and removing relevant reassignments
  1898. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2724:9
  1899. 277.49 s > |
  1900. 277.49 s > 2724 | let mut selection = SamplingChannelSelection::default();
  1901. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1902. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1903. 277.49 s > = note: `-D clippy::field-reassign-with-default` implied by `-D warnings`
  1904. 277.49 s > = help: to override `-D warnings` add `#[allow(clippy::field_reassign_with_default)]`
  1905. 277.49 s >
  1906. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  1907. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2745:9
  1908. 277.49 s > |
  1909. 277.49 s > 2745 | selection.default_channel_selection = vec!["named".into()];
  1910. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1911. 277.49 s > |
  1912. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["named".into()], ..Default::default() }` and removing relevant reassignments
  1913. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2744:9
  1914. 277.49 s > |
  1915. 277.49 s > 2744 | let mut selection = SamplingChannelSelection::default();
  1916. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1917. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1918. 277.49 s >
  1919. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  1920. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2768:9
  1921. 277.49 s > |
  1922. 277.49 s > 2768 | selection.default_channel_selection = vec!["threshold".into()];
  1923. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1924. 277.49 s > |
  1925. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  1926. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2767:9
  1927. 277.49 s > |
  1928. 277.49 s > 2767 | let mut selection = SamplingChannelSelection::default();
  1929. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1930. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1931. 277.49 s >
  1932. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  1933. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2820:9
  1934. 277.49 s > |
  1935. 277.49 s > 2820 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  1936. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1937. 277.49 s > |
  1938. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  1939. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2819:9
  1940. 277.49 s > |
  1941. 277.49 s > 2819 | let mut selection = SamplingChannelSelection::default();
  1942. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1943. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1944. 277.49 s >
  1945. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  1946. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2837:9
  1947. 277.49 s > |
  1948. 277.49 s > 2837 | selection.default_channel_selection = vec!["auto:surfaces".into(), "auto:lmb".into()];
  1949. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1950. 277.49 s > |
  1951. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:surfaces".into(), "auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  1952. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2836:9
  1953. 277.49 s > |
  1954. 277.49 s > 2836 | let mut selection = SamplingChannelSelection::default();
  1955. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1956. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1957. 277.49 s >
  1958. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  1959. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2847:9
  1960. 277.49 s > |
  1961. 277.49 s > 2847 | selection.default_channel_selection = vec!["auto:surfaces".into()];
  1962. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1963. 277.49 s > |
  1964. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:surfaces".into()], ..Default::default() }` and removing relevant reassignments
  1965. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2846:9
  1966. 277.49 s > |
  1967. 277.49 s > 2846 | let mut selection = SamplingChannelSelection::default();
  1968. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1969. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1970. 277.49 s >
  1971. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  1972. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2868:13
  1973. 277.49 s > |
  1974. 277.49 s > 2868 | selection.default_channel_selection = vec![preset.into()];
  1975. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1976. 277.49 s > |
  1977. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec![preset.into()], ..Default::default() }` and removing relevant reassignments
  1978. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2867:13
  1979. 277.49 s > |
  1980. 277.49 s > 2867 | let mut selection = SamplingChannelSelection::default();
  1981. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1982. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1983. 277.49 s >
  1984. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  1985. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2899:9
  1986. 277.49 s > |
  1987. 277.49 s > 2899 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  1988. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1989. 277.49 s > |
  1990. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  1991. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2898:9
  1992. 277.49 s > |
  1993. 277.49 s > 2898 | let mut selection = SamplingChannelSelection::default();
  1994. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1995. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1996. 277.49 s >
  1997. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  1998. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2981:13
  1999. 277.49 s > |
  2000. 277.49 s > 2981 | selection.default_channel_selection = vec![name.to_owned()];
  2001. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2002. 277.49 s > |
  2003. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec![name.to_owned()], ..Default::default() }` and removing relevant reassignments
  2004. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2980:13
  2005. 277.49 s > |
  2006. 277.49 s > 2980 | let mut selection = SamplingChannelSelection::default();
  2007. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2008. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2009. 277.49 s >
  2010. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2011. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3015:9
  2012. 277.49 s > |
  2013. 277.49 s > 3015 | selection.default_channel_selection = vec!["threshold".into()];
  2014. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2015. 277.49 s > |
  2016. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  2017. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3014:9
  2018. 277.49 s > |
  2019. 277.49 s > 3014 | let mut selection = SamplingChannelSelection::default();
  2020. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2021. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2022. 277.49 s >
  2023. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2024. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3060:9
  2025. 277.49 s > |
  2026. 277.49 s > 3060 | selection.default_channel_selection = vec!["conditional".into()];
  2027. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2028. 277.49 s > |
  2029. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["conditional".into()], ..Default::default() }` and removing relevant reassignments
  2030. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3059:9
  2031. 277.49 s > |
  2032. 277.49 s > 3059 | let mut selection = SamplingChannelSelection::default();
  2033. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2034. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2035. 277.49 s >
  2036. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2037. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3122:9
  2038. 277.49 s > |
  2039. 277.49 s > 3122 | selection.default_channel_selection = vec!["h".into(), "z".into()];
  2040. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2041. 277.49 s > |
  2042. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["h".into(), "z".into()], ..Default::default() }` and removing relevant reassignments
  2043. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3121:9
  2044. 277.49 s > |
  2045. 277.49 s > 3121 | let mut selection = SamplingChannelSelection::default();
  2046. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2047. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2048. 277.49 s >
  2049. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2050. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3166:9
  2051. 277.49 s > |
  2052. 277.49 s > 3166 | selection.default_channel_selection = vec!["auto:lmb".into()];
  2053. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2054. 277.49 s > |
  2055. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  2056. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3165:9
  2057. 277.49 s > |
  2058. 277.49 s > 3165 | let mut selection = SamplingChannelSelection::default();
  2059. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2060. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2061. 277.49 s >
  2062. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2063. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3188:9
  2064. 277.49 s > |
  2065. 277.49 s > 3188 | selection.default_channel_selection = vec!["auto:lmb".into()];
  2066. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2067. 277.49 s > |
  2068. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  2069. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3187:9
  2070. 277.49 s > |
  2071. 277.49 s > 3187 | let mut selection = SamplingChannelSelection::default();
  2072. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2073. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2074. 277.49 s >
  2075. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2076. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3240:9
  2077. 277.49 s > |
  2078. 277.49 s > 3240 | selection.default_channel_selection = vec!["named".into()];
  2079. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2080. 277.49 s > |
  2081. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["named".into()], ..Default::default() }` and removing relevant reassignments
  2082. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3239:9
  2083. 277.49 s > |
  2084. 277.49 s > 3239 | let mut selection = SamplingChannelSelection::default();
  2085. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2086. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2087. 277.49 s >
  2088. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2089. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3289:9
  2090. 277.49 s > |
  2091. 277.49 s > 3289 | selection.default_channel_selection = vec!["threshold".into()];
  2092. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2093. 277.49 s > |
  2094. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  2095. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3288:9
  2096. 277.49 s > |
  2097. 277.49 s > 3288 | let mut selection = SamplingChannelSelection::default();
  2098. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2099. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2100. 277.49 s >
  2101. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2102. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3336:9
  2103. 277.49 s > |
  2104. 277.49 s > 3336 | selection.default_channel_selection = vec!["cut_channel".into()];
  2105. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2106. 277.49 s > |
  2107. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_channel".into()], ..Default::default() }` and removing relevant reassignments
  2108. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3335:9
  2109. 277.49 s > |
  2110. 277.49 s > 3335 | let mut selection = SamplingChannelSelection::default();
  2111. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2112. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2113. 277.49 s >
  2114. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2115. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3366:9
  2116. 277.49 s > |
  2117. 277.49 s > 3366 | selection.default_channel_selection = vec!["right_channel".into()];
  2118. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2119. 277.49 s > |
  2120. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["right_channel".into()], ..Default::default() }` and removing relevant reassignments
  2121. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3365:9
  2122. 277.49 s > |
  2123. 277.49 s > 3365 | let mut selection = SamplingChannelSelection::default();
  2124. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2125. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2126. 277.49 s >
  2127. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2128. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3393:9
  2129. 277.49 s > |
  2130. 277.49 s > 3393 | selection.default_channel_selection = vec!["cut_chart".into()];
  2131. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2132. 277.49 s > |
  2133. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_chart".into()], ..Default::default() }` and removing relevant reassignments
  2134. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3392:9
  2135. 277.49 s > |
  2136. 277.49 s > 3392 | let mut selection = SamplingChannelSelection::default();
  2137. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2138. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2139. 277.49 s >
  2140. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2141. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3419:9
  2142. 277.49 s > |
  2143. 277.49 s > 3419 | selection.default_channel_selection = vec!["cut_chart".into()];
  2144. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2145. 277.49 s > |
  2146. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_chart".into()], ..Default::default() }` and removing relevant reassignments
  2147. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3418:9
  2148. 277.49 s > |
  2149. 277.49 s > 3418 | let mut selection = SamplingChannelSelection::default();
  2150. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2151. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2152. 277.49 s >
  2153. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2154. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3496:9
  2155. 277.49 s > |
  2156. 277.49 s > 3496 | selection.default_channel_selection = vec!["left_target".into()];
  2157. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2158. 277.49 s > |
  2159. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["left_target".into()], ..Default::default() }` and removing relevant reassignments
  2160. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3495:9
  2161. 277.49 s > |
  2162. 277.49 s > 3495 | let mut selection = SamplingChannelSelection::default();
  2163. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2164. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2165. 277.49 s >
  2166. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2167. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3540:9
  2168. 277.49 s > |
  2169. 277.49 s > 3540 | selection.default_channel_selection = vec!["threshold".into()];
  2170. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2171. 277.49 s > |
  2172. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  2173. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3539:9
  2174. 277.49 s > |
  2175. 277.49 s > 3539 | let mut selection = SamplingChannelSelection::default();
  2176. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2177. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2178. 277.49 s >
  2179. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2180. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3564:9
  2181. 277.49 s > |
  2182. 277.49 s > 3564 | selection.default_channel_selection = vec!["joint".into()];
  2183. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2184. 277.49 s > |
  2185. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  2186. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3563:9
  2187. 277.49 s > |
  2188. 277.49 s > 3563 | let mut selection = SamplingChannelSelection::default();
  2189. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2190. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2191. 277.49 s >
  2192. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2193. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3597:9
  2194. 277.49 s > |
  2195. 277.49 s > 3597 | selection.default_channel_selection = vec!["joint".into()];
  2196. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2197. 277.49 s > |
  2198. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  2199. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3596:9
  2200. 277.49 s > |
  2201. 277.49 s > 3596 | let mut selection = SamplingChannelSelection::default();
  2202. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2203. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2204. 277.49 s >
  2205. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2206. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3654:9
  2207. 277.49 s > |
  2208. 277.49 s > 3654 | selection.default_channel_selection = vec!["joint".into()];
  2209. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2210. 277.49 s > |
  2211. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  2212. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3653:9
  2213. 277.49 s > |
  2214. 277.49 s > 3653 | let mut selection = SamplingChannelSelection::default();
  2215. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2216. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2217. 277.49 s >
  2218. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2219. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3758:9
  2220. 277.49 s > |
  2221. 277.49 s > 3758 | selection.default_channel_selection = vec!["auto:lmb".into()];
  2222. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2223. 277.49 s > |
  2224. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  2225. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3757:9
  2226. 277.49 s > |
  2227. 277.49 s > 3757 | let mut selection = SamplingChannelSelection::default();
  2228. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2229. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2230. 277.49 s >
  2231. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2232. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3806:9
  2233. 277.49 s > |
  2234. 277.49 s > 3806 | selection.default_channel_selection = vec!["auto:lmb".into()];
  2235. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2236. 277.49 s > |
  2237. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  2238. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3805:9
  2239. 277.49 s > |
  2240. 277.49 s > 3805 | let mut selection = SamplingChannelSelection::default();
  2241. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2242. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2243. 277.49 s >
  2244. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2245. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3838:9
  2246. 277.49 s > |
  2247. 277.49 s > 3838 | selection.default_channel_selection = vec!["auto:lmb".into()];
  2248. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2249. 277.49 s > |
  2250. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  2251. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3837:9
  2252. 277.49 s > |
  2253. 277.49 s > 3837 | let mut selection = SamplingChannelSelection::default();
  2254. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2255. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2256. 277.49 s >
  2257. 277.49 s > error: using `clone` on type `Complex<F<f64>>` which implements the `Copy` trait
  2258. 277.49 s > --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:160:32
  2259. 277.49 s > |
  2260. 277.49 s > 160 | value: value.values[0].clone(),
  2261. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `value.values[0]`
  2262. 277.49 s > |
  2263. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  2264. 277.49 s >
  2265. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2266. 277.49 s > --> crates/gammalooprs/src/integrands/process/mod.rs:5511:9
  2267. 277.49 s > |
  2268. 277.49 s > 5511 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  2269. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2270. 277.49 s > |
  2271. 277.49 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  2272. 277.49 s > --> crates/gammalooprs/src/integrands/process/mod.rs:5510:9
  2273. 277.49 s > |
  2274. 277.49 s > 5510 | let mut selection = SamplingChannelSelection::default();
  2275. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2276. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2277. 277.49 s >
  2278. 277.49 s > error: field assignment outside of initializer for an instance created with Default::default()
  2279. 277.49 s > --> crates/gammalooprs/src/integrands/process/mod.rs:5514:9
  2280. 277.49 s > |
  2281. 277.49 s > 5514 | parameterization_settings.sampling_channels = selection;
  2282. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2283. 277.49 s > |
  2284. 277.49 s > note: consider initializing the variable with `settings::runtime::ParameterizationSettings { sampling_channels: selection, ..Default::default() }` and removing relevant reassignments
  2285. 277.49 s > --> crates/gammalooprs/src/integrands/process/mod.rs:5513:9
  2286. 277.49 s > |
  2287. 277.49 s > 5513 | let mut parameterization_settings = ParameterizationSettings::default();
  2288. 277.49 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2289. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2290. 277.49 s >
  2291. 277.49 s > error: large size difference between variants
  2292. 277.49 s > --> crates/gammalooprs/src/integrands/mod.rs:54:1
  2293. 277.49 s > |
  2294. 277.49 s > 54 | / pub enum Integrand {
  2295. 277.49 s > 55 | | ProcessIntegrand(Box<ProcessIntegrand>),
  2296. 277.49 s > | | --------------------------------------- the second-largest variant contains at least 8 bytes
  2297. 277.49 s > 56 | | #[cfg(test)]
  2298. 277.49 s > 57 | | TestProbe(TestProbeIntegrand),
  2299. 277.49 s > | | ----------------------------- the largest variant contains at least 888 bytes
  2300. 277.49 s > 58 | | }
  2301. 277.49 s > | |_^ the entire enum is at least 888 bytes
  2302. 277.49 s > |
  2303. 277.49 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#large_enum_variant
  2304. 277.49 s > = note: `-D clippy::large-enum-variant` implied by `-D warnings`
  2305. 277.49 s > = help: to override `-D warnings` add `#[allow(clippy::large_enum_variant)]`
  2306. 277.49 s > help: consider boxing the large fields or introducing indirection in some other way to reduce the total size of the enum
  2307. 277.49 s > |
  2308. 277.49 s > 57 - TestProbe(TestProbeIntegrand),
  2309. 277.49 s > 57 + TestProbe(Box<TestProbeIntegrand>),
  2310. 277.49 s > |
  2311. 277.49 s >
  2312. 277.49 s > error: could not compile `gammalooprs` (lib test) due to 49 previous errors
  2313. 277.49 s For full logs, run:
  2314. 277.49 s nix log /nix/store/l6s72cbhcyppdy6qmrlx5xxbmnbpfaza-gammaloop-workspace-clippy-0.1.0.drv
  2315. 277.52 s Build failed.
More Logs Raw Logs

Agent Instructions

Wait for completion, without logs:

curl --netrc -N https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/7f1b3e01a47455d6940cbc5093e6c9f7a9777a60/d21cfff6-ffb1-4076-bf6a-5468a5f3df0e/wait

Latest logs, with timestamps (streams while running):

curl --netrc -N https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/7f1b3e01a47455d6940cbc5093e6c9f7a9777a60/d21cfff6-ffb1-4076-bf6a-5468a5f3df0e/tail

All logs, with timestamps (available after completion):

curl --netrc https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/7f1b3e01a47455d6940cbc5093e6c9f7a9777a60/d21cfff6-ffb1-4076-bf6a-5468a5f3df0e/logs

Raw logs, from the start (no timestamps):

curl --netrc -N https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/7f1b3e01a47455d6940cbc5093e6c9f7a9777a60/d21cfff6-ffb1-4076-bf6a-5468a5f3df0e/raw-logs

Content types available for /logs and /tail (use Accept header):

Example:

curl --netrc -H "Accept: text/csv" https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/7f1b3e01a47455d6940cbc5093e6c9f7a9777a60/d21cfff6-ffb1-4076-bf6a-5468a5f3df0e/logs

Reproduce locally: https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/7f1b3e01a47455d6940cbc5093e6c9f7a9777a60/d21cfff6-ffb1-4076-bf6a-5468a5f3df0e/repro

This page is also available in machine-friendly formats. Request one with the Accept header:

For more instructions, fetch https://nix-ci.com/instructions .