build checks.x86_64-linux.gammaloop-clippy

Reproduce this run
Retry Run
  1. 0.00 s $ /nix/store/9ypz3flqsrl5xl495mm8h645gadjsxi1-coreutils-9.11/bin/timeout --kill-after=15s 7200s /nix/store/23zk8sgzamrbmj1fday15szf7f2279s8-nix-2.34.7/bin/nix --extra-experimental-features nix-command --extra-experimental-features flakes --log-format internal-json build --no-link --print-out-paths git+https://github.com/alphal00p/gammaloop?ref=advanced_sampling&rev=b07cda5e2fe2c7fceb47fc6663b349b5d9ebf5db&shallow=1#checks.x86_64-linux.gammaloop-clippy --print-build-logs
  2. 0.15 s error (ignored): SQLite database '/var/cache/nix-ci-worker/eval-cache-v6/c750534caaa8f7ca279d3b233a8566e71110fc92e3ba93ff6e9bdeb4c6d180e4.sqlite' is busy
  3. 3.08 s
  4. 3.44 s Building /nix/store/d8iasrfw09rzwhag7rn1lmbxvmrz8ks5-gammaloop-workspace-clippy-0.1.0.drv
  5. 3.55 s [gammaloop-workspace-clippy] Phase: unpackPhase
  6. 3.55 s [gammaloop-workspace-clippy] unpacking source archive /nix/store/niwlxjcsks4ybgn24z35xizwz35nka4d-source
  7. 3.75 s [gammaloop-workspace-clippy] source root is source
  8. 3.78 s [gammaloop-workspace-clippy] Phase: patchPhase
  9. 3.79 s [gammaloop-workspace-clippy] Executing configureCargoCommonVars
  10. 3.79 s [gammaloop-workspace-clippy] decompressing cargo artifacts from /nix/store/50vpxlcgfxf2d57i27v3d10zjwxxbm2r-gammaloop-workspace-deps-deps-0.1.0/target.tar.zst to target
  11. 5.75 s [gammaloop-workspace-clippy] Phase: updateAutotoolsGnuConfigScriptsPhase
  12. 5.80 s [gammaloop-workspace-clippy] Phase: configurePhase
  13. 6.23 s [gammaloop-workspace-clippy] will append /build/source/.cargo-home/config.toml with contents of /nix/store/5drf77x6km4ky7gwlrzdx9bbd6fz09g3-vendor-cargo-deps/config.toml
  14. 6.23 s [gammaloop-workspace-clippy] default configurePhase, nothing to do
  15. 6.23 s [gammaloop-workspace-clippy] Phase: buildPhase
  16. 6.24 s [gammaloop-workspace-clippy] +++ command cargo --version
  17. 6.24 s [gammaloop-workspace-clippy] cargo 1.97.0 (c980f4866 2026-06-30)
  18. 6.28 s [gammaloop-workspace-clippy] +++ command cargo clippy --profile ci-optim --locked --workspace --features gammaloop-tracing-filter/clap,gammaloop-tracing-filter/symbolica,idenso/bincode,idenso/reference-cases,linnet/bincode,linnet/drawing,linnet/rkyv,linnet/serde,linnet/symbolica,spenso-macros/shadowing,spenso/shadowing,symbolica/tracing_max_level_info,three-dimensional-reps/display,three-dimensional-reps/eval,three-dimensional-reps/serde --all-targets --no-deps -- --deny warnings
  19. 7.03 s [gammaloop-workspace-clippy] Checking cfg-if v1.0.4
  20. 7.03 s [gammaloop-workspace-clippy] Checking memchr v2.8.0
  21. 7.03 s [gammaloop-workspace-clippy] Checking once_cell v1.21.4
  22. 7.04 s [gammaloop-workspace-clippy] Checking either v1.15.0
  23. 7.05 s [gammaloop-workspace-clippy] Checking serde_core v1.0.228
  24. 7.05 s [gammaloop-workspace-clippy] Checking libc v0.2.186
  25. 7.05 s [gammaloop-workspace-clippy] Checking libm v0.2.16
  26. 7.06 s [gammaloop-workspace-clippy] Checking itoa v1.0.18
  27. 7.07 s [gammaloop-workspace-clippy] Checking log v0.4.29
  28. 7.07 s [gammaloop-workspace-clippy] Checking regex-syntax v0.8.10
  29. 7.09 s [gammaloop-workspace-clippy] Checking zerocopy v0.8.48
  30. 7.09 s [gammaloop-workspace-clippy] Checking crossbeam-utils v0.8.21
  31. 7.09 s [gammaloop-workspace-clippy] Checking equivalent v1.0.2
  32. 7.11 s [gammaloop-workspace-clippy] Checking zmij v1.0.21
  33. 7.11 s [gammaloop-workspace-clippy] Checking bytemuck v1.25.0
  34. 7.11 s [gammaloop-workspace-clippy] Checking lazy_static v1.5.0
  35. 7.11 s [gammaloop-workspace-clippy] Compiling target-lexicon v0.13.5
  36. 7.15 s [gammaloop-workspace-clippy] Checking arrayvec v0.7.6
  37. 7.18 s [gammaloop-workspace-clippy] Checking powerfmt v0.2.0
  38. 7.19 s [gammaloop-workspace-clippy] Checking time-core v0.1.8
  39. 7.20 s [gammaloop-workspace-clippy] Checking pin-project-lite v0.2.17
  40. 7.21 s [gammaloop-workspace-clippy] Checking itertools v0.14.0
  41. 7.23 s [gammaloop-workspace-clippy] Checking num-conv v0.2.1
  42. 7.26 s [gammaloop-workspace-clippy] Checking num_threads v0.1.7
  43. 7.30 s [gammaloop-workspace-clippy] Checking safe_arch v0.7.4
  44. 7.33 s [gammaloop-workspace-clippy] Checking deranged v0.5.8
  45. 7.34 s [gammaloop-workspace-clippy] Checking tracing-core v0.1.36
  46. 7.35 s [gammaloop-workspace-clippy] Checking foldhash v0.2.0
  47. 7.35 s [gammaloop-workspace-clippy] Checking allocator-api2 v0.2.21
  48. 7.37 s [gammaloop-workspace-clippy] Checking const-random v0.1.18
  49. 7.43 s [gammaloop-workspace-clippy] Checking unty v0.0.4
  50. 7.44 s [gammaloop-workspace-clippy] Checking winnow v1.0.2
  51. 7.50 s [gammaloop-workspace-clippy] Checking static_assertions v1.1.0
  52. 7.54 s [gammaloop-workspace-clippy] Checking nu-ansi-term v0.50.3
  53. 7.56 s [gammaloop-workspace-clippy] Checking safe_arch v1.0.0
  54. 7.58 s [gammaloop-workspace-clippy] Checking aho-corasick v1.1.4
  55. 7.67 s [gammaloop-workspace-clippy] Checking wide v0.7.33
  56. 7.70 s [gammaloop-workspace-clippy] Checking crossbeam-epoch v0.9.18
  57. 7.75 s [gammaloop-workspace-clippy] Checking hashbrown v0.16.1
  58. 7.81 s [gammaloop-workspace-clippy] Checking tracing v0.1.44
  59. 8.02 s [gammaloop-workspace-clippy] Checking tracing-log v0.2.0
  60. 8.03 s [gammaloop-workspace-clippy] Checking sharded-slab v0.1.7
  61. 8.07 s [gammaloop-workspace-clippy] Checking thread_local v1.1.9
  62. 8.10 s [gammaloop-workspace-clippy] Checking crossbeam-deque v0.8.6
  63. 8.17 s [gammaloop-workspace-clippy] Checking indenter v0.3.4
  64. 8.24 s [gammaloop-workspace-clippy] Checking toml_writer v1.1.1+spec-1.1.0
  65. 8.27 s [gammaloop-workspace-clippy] Checking az v1.3.0
  66. 8.38 s [gammaloop-workspace-clippy] Checking rayon-core v1.13.0
  67. 8.43 s [gammaloop-workspace-clippy] Checking wide v1.3.0
  68. 8.45 s [gammaloop-workspace-clippy] Compiling phf_shared v0.11.3
  69. 8.57 s [gammaloop-workspace-clippy] Checking num-traits v0.2.19
  70. 8.70 s [gammaloop-workspace-clippy] Checking anyhow v1.0.102
  71. 8.74 s [gammaloop-workspace-clippy] Checking alloc-no-stdlib v2.0.4
  72. 8.77 s [gammaloop-workspace-clippy] Checking utf8parse v0.2.2
  73. 8.84 s [gammaloop-workspace-clippy] Checking dyn-clone v1.0.20
  74. 8.93 s [gammaloop-workspace-clippy] Checking rawpointer v0.2.1
  75. 8.95 s [gammaloop-workspace-clippy] Checking anstyle-parse v1.0.0
  76. 8.96 s [gammaloop-workspace-clippy] Checking alloc-stdlib v0.2.2
  77. 8.97 s [gammaloop-workspace-clippy] Checking rayon v1.12.0
  78. 8.97 s [gammaloop-workspace-clippy] Checking colorchoice v1.0.5
  79. 9.01 s [gammaloop-workspace-clippy] Checking matrixmultiply v0.3.10
  80. 9.10 s [gammaloop-workspace-clippy] Checking anstyle-query v1.1.5
  81. 9.11 s [gammaloop-workspace-clippy] Checking anstyle v1.0.14
  82. 9.18 s [gammaloop-workspace-clippy] Checking is_terminal_polyfill v1.70.2
  83. 9.19 s [gammaloop-workspace-clippy] Checking colored v3.1.1
  84. 9.20 s [gammaloop-workspace-clippy] Checking getrandom v0.3.4
  85. 9.20 s [gammaloop-workspace-clippy] Checking time v0.3.47
  86. 9.24 s [gammaloop-workspace-clippy] Checking toml_parser v1.1.2+spec-1.1.0
  87. 9.27 s [gammaloop-workspace-clippy] Checking gmp-mpfr-sys v1.7.1
  88. 9.33 s [gammaloop-workspace-clippy] Checking anstream v1.0.0
  89. 9.36 s [gammaloop-workspace-clippy] Checking rand_core v0.9.5
  90. 9.38 s [gammaloop-workspace-clippy] Compiling phf_generator v0.11.3
  91. 9.41 s [gammaloop-workspace-clippy] Checking eyre v0.6.12
  92. 9.43 s [gammaloop-workspace-clippy] Checking approx v0.5.1
  93. 9.55 s [gammaloop-workspace-clippy] Checking num-integer v0.1.46
  94. 9.57 s [gammaloop-workspace-clippy] Checking unicode-width v0.2.2
  95. 9.59 s [gammaloop-workspace-clippy] Checking bitflags v1.3.2
  96. 9.62 s [gammaloop-workspace-clippy] Compiling phf_codegen v0.11.3
  97. 9.64 s [gammaloop-workspace-clippy] Checking regex-automata v0.4.14
  98. 9.65 s [gammaloop-workspace-clippy] Checking hugepage-rs v0.1.1
  99. 9.67 s [gammaloop-workspace-clippy] Checking wasmtime-jit-icache-coherence v34.0.2
  100. 9.68 s [gammaloop-workspace-clippy] Checking region v3.0.2
  101. 9.74 s [gammaloop-workspace-clippy] Compiling pyo3-build-config v0.28.3
  102. 9.78 s [gammaloop-workspace-clippy] Checking brotli-decompressor v5.0.0
  103. 9.80 s [gammaloop-workspace-clippy] Checking inventory v0.3.24
  104. 9.80 s [gammaloop-workspace-clippy] Checking spec_math v0.1.6
  105. 9.83 s [gammaloop-workspace-clippy] Checking thiserror v2.0.18
  106. 9.85 s [gammaloop-workspace-clippy] Compiling getopts v0.2.24
  107. 9.86 s [gammaloop-workspace-clippy] Checking libloading v0.9.0
  108. 9.87 s [gammaloop-workspace-clippy] Checking serde v1.0.228
  109. 9.88 s [gammaloop-workspace-clippy] Checking serde_json v1.0.149
  110. 9.89 s [gammaloop-workspace-clippy] Checking bitflags v2.11.1
  111. 9.91 s [gammaloop-workspace-clippy] Checking serde_spanned v1.1.1
  112. 9.96 s [gammaloop-workspace-clippy] Checking toml_datetime v1.1.1+spec-1.1.0
  113. 10.03 s [gammaloop-workspace-clippy] Checking self_cell v1.2.2
  114. 10.04 s [gammaloop-workspace-clippy] Checking append-only-vec v0.1.8
  115. 10.07 s [gammaloop-workspace-clippy] Checking bytes v1.11.1
  116. 10.10 s [gammaloop-workspace-clippy] Checking tinyjson v2.5.1
  117. 10.13 s [gammaloop-workspace-clippy] Checking byteorder v1.5.0
  118. 10.15 s [gammaloop-workspace-clippy] Compiling unic-char-range v0.9.0
  119. 10.31 s [gammaloop-workspace-clippy] Checking toml v1.1.2+spec-1.1.0
  120. 10.36 s [gammaloop-workspace-clippy] Compiling unicode_names2_generator v1.3.0
  121. 10.38 s [gammaloop-workspace-clippy] Compiling unic-common v0.9.0
  122. 10.48 s [gammaloop-workspace-clippy] Checking linux-raw-sys v0.12.1
  123. 10.54 s [gammaloop-workspace-clippy] Compiling unic-ucd-version v0.9.0
  124. 10.64 s [gammaloop-workspace-clippy] Compiling unic-char-property v0.9.0
  125. 10.67 s [gammaloop-workspace-clippy] Compiling is-macro v0.3.7
  126. 10.70 s [gammaloop-workspace-clippy] Checking smallvec v1.15.1
  127. 10.77 s [gammaloop-workspace-clippy] Checking num-complex v0.4.6
  128. 10.85 s [gammaloop-workspace-clippy] Checking tracing-serde v0.2.0
  129. 10.94 s [gammaloop-workspace-clippy] Checking bincode v2.0.1
  130. 11.03 s [gammaloop-workspace-clippy] Checking brotli v8.0.2
  131. 11.06 s [gammaloop-workspace-clippy] Checking smartstring v1.0.1
  132. 11.13 s [gammaloop-workspace-clippy] Checking rustix v1.1.4
  133. 11.41 s [gammaloop-workspace-clippy] Checking simba v0.9.1
  134. 11.48 s [gammaloop-workspace-clippy] Compiling rustpython-parser-vendored v0.4.0
  135. 11.50 s [gammaloop-workspace-clippy] Checking iana-time-zone v0.1.65
  136. 11.50 s [gammaloop-workspace-clippy] Compiling rustpython-parser v0.4.0
  137. 11.53 s [gammaloop-workspace-clippy] Compiling phf v0.11.3
  138. 11.54 s [gammaloop-workspace-clippy] Checking rustc-hash v2.1.2
  139. 11.68 s [gammaloop-workspace-clippy] Checking ndarray v0.17.2
  140. 11.71 s [gammaloop-workspace-clippy] Compiling unic-emoji-char v0.9.0
  141. 11.76 s [gammaloop-workspace-clippy] Compiling unic-ucd-ident v0.9.0
  142. 11.78 s [gammaloop-workspace-clippy] Checking chrono v0.4.44
  143. 11.92 s [gammaloop-workspace-clippy] Compiling rustc-hash v1.1.0
  144. 12.00 s [gammaloop-workspace-clippy] Compiling lalrpop-util v0.20.2
  145. 12.05 s [gammaloop-workspace-clippy] Checking rug v1.30.0
  146. 12.82 s [gammaloop-workspace-clippy] Checking unicode-segmentation v1.13.2
  147. 12.86 s [gammaloop-workspace-clippy] Checking ppv-lite86 v0.2.21
  148. 13.01 s [gammaloop-workspace-clippy] Checking ahash v0.8.12
  149. 13.06 s [gammaloop-workspace-clippy] Compiling symbolica v2.2.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  150. 13.14 s [gammaloop-workspace-clippy] Checking typenum v1.20.0
  151. 13.18 s [gammaloop-workspace-clippy] Checking getrandom v0.2.17
  152. 13.52 s [gammaloop-workspace-clippy] Checking scopeguard v1.2.0
  153. 13.52 s [gammaloop-workspace-clippy] Checking rand_chacha v0.9.0
  154. 13.54 s [gammaloop-workspace-clippy] Checking parking_lot_core v0.9.12
  155. 13.56 s [gammaloop-workspace-clippy] Checking unicode-ident v1.0.24
  156. 13.62 s [gammaloop-workspace-clippy] Checking lock_api v0.4.14
  157. 13.78 s [gammaloop-workspace-clippy] Checking hashbrown v0.17.0
  158. 13.85 s [gammaloop-workspace-clippy] Checking rand v0.9.4
  159. 13.93 s [gammaloop-workspace-clippy] Checking errno v0.3.14
  160. 13.96 s [gammaloop-workspace-clippy] Checking clap_lex v1.1.0
  161. 14.02 s [gammaloop-workspace-clippy] Checking terminal_size v0.4.4
  162. 14.12 s [gammaloop-workspace-clippy] Checking strsim v0.11.1
  163. 14.14 s [gammaloop-workspace-clippy] Checking unicase v2.9.0
  164. 14.15 s [gammaloop-workspace-clippy] Checking matchers v0.2.0
  165. 14.15 s [gammaloop-workspace-clippy] Checking regex v1.12.3
  166. 14.25 s [gammaloop-workspace-clippy] Checking parking_lot v0.12.5
  167. 14.30 s [gammaloop-workspace-clippy] Checking signal-hook-registry v1.4.8
  168. 14.48 s [gammaloop-workspace-clippy] Checking vte v0.14.1
  169. 14.55 s [gammaloop-workspace-clippy] Checking generic-array v0.14.7
  170. 14.89 s [gammaloop-workspace-clippy] Checking same-file v1.0.6
  171. 15.14 s [gammaloop-workspace-clippy] Checking walkdir v2.5.0
  172. 15.25 s [gammaloop-workspace-clippy] Checking block-buffer v0.10.4
  173. 15.27 s [gammaloop-workspace-clippy] Checking clap_builder v4.6.0
  174. 15.30 s [gammaloop-workspace-clippy] Checking signal-hook v0.3.18
  175. 15.37 s [gammaloop-workspace-clippy] Checking tracing-subscriber v0.3.23
  176. 15.40 s [gammaloop-workspace-clippy] Checking crypto-common v0.1.7
  177. 15.41 s [gammaloop-workspace-clippy] Checking half v2.7.1
  178. 15.51 s [gammaloop-workspace-clippy] Checking mio v1.2.0
  179. 15.61 s [gammaloop-workspace-clippy] Checking ciborium-io v0.2.2
  180. 15.72 s [gammaloop-workspace-clippy] Checking minimal-lexical v0.2.1
  181. 15.81 s [gammaloop-workspace-clippy] Checking indexmap v2.14.0
  182. 15.87 s [gammaloop-workspace-clippy] Checking digest v0.10.7
  183. 15.94 s [gammaloop-workspace-clippy] Checking symjit v2.21.0
  184. 16.00 s [gammaloop-workspace-clippy] Checking ciborium-ll v0.2.2
  185. 16.13 s [gammaloop-workspace-clippy] Checking derive_more v2.1.1
  186. 16.14 s [gammaloop-workspace-clippy] Checking nom v7.1.3
  187. 16.23 s [gammaloop-workspace-clippy] Checking num-bigint v0.4.6
  188. 16.33 s [gammaloop-workspace-clippy] Compiling unicode_names2 v1.3.0
  189. 16.35 s [gammaloop-workspace-clippy] Checking console v0.16.3
  190. 16.40 s [gammaloop-workspace-clippy] Checking signal-hook-mio v0.2.5
  191. 16.50 s [gammaloop-workspace-clippy] Checking bstr v1.12.1
  192. 16.95 s [gammaloop-workspace-clippy] Checking linux-raw-sys v0.4.15
  193. 16.97 s [gammaloop-workspace-clippy] Checking cpufeatures v0.2.17
  194. 17.05 s [gammaloop-workspace-clippy] Checking winnow v0.7.15
  195. 17.12 s [gammaloop-workspace-clippy] Checking xprec v0.2.2
  196. 17.20 s [gammaloop-workspace-clippy] Checking globset v0.4.18
  197. 17.41 s [gammaloop-workspace-clippy] Checking sha2 v0.10.9
  198. 17.43 s [gammaloop-workspace-clippy] Checking ciborium v0.2.2
  199. 17.44 s [gammaloop-workspace-clippy] Checking getrandom v0.4.2
  200. 17.57 s [gammaloop-workspace-clippy] Checking rand_core v0.6.4
  201. 17.59 s [gammaloop-workspace-clippy] Checking rustix v0.38.44
  202. 17.79 s [gammaloop-workspace-clippy] Checking plotters-backend v0.3.7
  203. 17.84 s [gammaloop-workspace-clippy] Checking fnv v1.0.7
  204. 17.85 s [gammaloop-workspace-clippy] Checking fastrand v2.4.1
  205. 17.87 s [gammaloop-workspace-clippy] Checking clap v4.6.1
  206. 17.92 s [gammaloop-workspace-clippy] Checking rust-embed-utils v8.11.0
  207. 17.98 s [gammaloop-workspace-clippy] Checking toml_datetime v0.6.11
  208. 18.01 s [gammaloop-workspace-clippy] Checking serde_spanned v0.6.9
  209. 18.12 s [gammaloop-workspace-clippy] Checking itertools v0.10.5
  210. 18.16 s [gammaloop-workspace-clippy] Checking cast v0.3.0
  211. 18.18 s [gammaloop-workspace-clippy] Checking tap v1.0.1
  212. 18.27 s [gammaloop-workspace-clippy] Checking plotters-svg v0.3.7
  213. 18.28 s [gammaloop-workspace-clippy] Checking toml_write v0.1.2
  214. 18.28 s [gammaloop-workspace-clippy] Checking tempfile v3.27.0
  215. 18.30 s [gammaloop-workspace-clippy] Checking wyz v0.5.1
  216. 18.45 s [gammaloop-workspace-clippy] Checking rand_chacha v0.3.1
  217. 18.46 s [gammaloop-workspace-clippy] Checking plotters v0.3.7
  218. 18.47 s [gammaloop-workspace-clippy] Checking radium v0.7.0
  219. 18.53 s [gammaloop-workspace-clippy] Checking typeid v1.0.3
  220. 18.59 s [gammaloop-workspace-clippy] Checking ansitok v0.3.0
  221. 18.62 s [gammaloop-workspace-clippy] Checking similar v2.7.0
  222. 18.63 s [gammaloop-workspace-clippy] Checking tinytemplate v1.2.1
  223. 18.68 s [gammaloop-workspace-clippy] Checking is-terminal v0.4.17
  224. 18.72 s [gammaloop-workspace-clippy] Checking oorandom v11.1.5
  225. 18.81 s [gammaloop-workspace-clippy] Checking funty v2.0.0
  226. 18.83 s [gammaloop-workspace-clippy] Checking anes v0.1.6
  227. 18.86 s [gammaloop-workspace-clippy] Checking bytecount v0.6.9
  228. 18.92 s [gammaloop-workspace-clippy] Checking crossterm v0.28.1
  229. 18.96 s [gammaloop-workspace-clippy] Checking rand v0.8.6
  230. 19.07 s [gammaloop-workspace-clippy] Checking ron v0.12.1
  231. 19.10 s [gammaloop-workspace-clippy] Checking toml_edit v0.25.11+spec-1.1.0
  232. 19.16 s [gammaloop-workspace-clippy] Compiling pyo3-macros-backend v0.28.3
  233. 19.28 s [gammaloop-workspace-clippy] Compiling pyo3-ffi v0.28.3
  234. 19.39 s [gammaloop-workspace-clippy] Compiling pyo3 v0.28.3
  235. 19.57 s [gammaloop-workspace-clippy] Compiling numpy v0.28.0
  236. 19.87 s [gammaloop-workspace-clippy] Checking criterion-plot v0.5.0
  237. 19.89 s [gammaloop-workspace-clippy] Checking toml_edit v0.22.27
  238. 19.99 s [gammaloop-workspace-clippy] Checking ansi-str v0.9.0
  239. 20.02 s [gammaloop-workspace-clippy] Checking bitvec v1.0.1
  240. 20.09 s [gammaloop-workspace-clippy] Checking testing_table v0.3.0
  241. 20.21 s [gammaloop-workspace-clippy] Checking uncased v0.9.10
  242. 20.30 s [gammaloop-workspace-clippy] Checking env_filter v1.0.1
  243. 20.31 s [gammaloop-workspace-clippy] Checking jiff v0.2.24
  244. 20.36 s [gammaloop-workspace-clippy] Checking criterion v0.5.1
  245. 20.50 s [gammaloop-workspace-clippy] Checking ptr_meta v0.1.4
  246. 20.52 s [gammaloop-workspace-clippy] Checking simdutf8 v0.1.5
  247. 20.54 s [gammaloop-workspace-clippy] Checking papergrid v0.17.0
  248. 20.56 s [gammaloop-workspace-clippy] Checking ucd-trie v0.1.7
  249. 20.62 s [gammaloop-workspace-clippy] Checking ahash v0.7.8
  250. 20.67 s [gammaloop-workspace-clippy] Checking approx v0.4.0
  251. 20.71 s [gammaloop-workspace-clippy] Checking bytecheck v0.6.12
  252. 20.72 s [gammaloop-workspace-clippy] Checking pest v2.8.6
  253. 20.74 s [gammaloop-workspace-clippy] Checking seahash v4.1.0
  254. 20.80 s [gammaloop-workspace-clippy] Checking insta v1.47.2
  255. 20.82 s [gammaloop-workspace-clippy] Checking hashbrown v0.12.3
  256. 20.89 s [gammaloop-workspace-clippy] Checking cgmath v0.18.0
  257. 20.91 s [gammaloop-workspace-clippy] Checking num-rational v0.4.2
  258. 21.11 s [gammaloop-workspace-clippy] Checking num-iter v0.1.45
  259. 21.20 s [gammaloop-workspace-clippy] Checking rend v0.4.2
  260. 21.24 s [gammaloop-workspace-clippy] Checking ref-ops v0.2.5
  261. 21.31 s [gammaloop-workspace-clippy] Checking num v0.4.3
  262. 21.34 s [gammaloop-workspace-clippy] Checking rand_xoshiro v0.6.0
  263. 21.40 s [gammaloop-workspace-clippy] Checking features v0.10.0
  264. 21.49 s [gammaloop-workspace-clippy] Checking constcat v0.5.1
  265. 21.58 s [gammaloop-workspace-clippy] Checking gat-lending-iterator v0.1.8
  266. 21.62 s [gammaloop-workspace-clippy] Checking colored v2.2.0
  267. 21.65 s [gammaloop-workspace-clippy] Checking arrayref v0.3.9
  268. 21.72 s [gammaloop-workspace-clippy] Checking constant_time_eq v0.4.2
  269. 21.74 s [gammaloop-workspace-clippy] Compiling rustpython-parser-core v0.4.0
  270. 21.87 s [gammaloop-workspace-clippy] Checking cpufeatures v0.3.0
  271. 21.88 s [gammaloop-workspace-clippy] Checking base64 v0.22.1
  272. 21.93 s [gammaloop-workspace-clippy] Compiling rustpython-ast v0.4.0
  273. 21.95 s [gammaloop-workspace-clippy] Checking tabled v0.20.0
  274. 22.06 s [gammaloop-workspace-clippy] Checking blake3 v1.8.5
  275. 22.07 s [gammaloop-workspace-clippy] Checking siphasher v1.0.2
  276. 22.09 s [gammaloop-workspace-clippy] Checking dot-parser v0.5.1
  277. 22.16 s [gammaloop-workspace-clippy] Checking joinery v2.1.0
  278. 22.20 s [gammaloop-workspace-clippy] Checking subprocess v0.2.15
  279. 22.26 s [gammaloop-workspace-clippy] Checking phf_shared v0.13.1
  280. 22.40 s [gammaloop-workspace-clippy] Checking titlecase v2.2.1
  281. 22.64 s [gammaloop-workspace-clippy] Checking toml v0.8.23
  282. 22.66 s [gammaloop-workspace-clippy] Checking rust_lisp v0.18.0
  283. 22.72 s [gammaloop-workspace-clippy] Compiling vakint v0.1.2 (/build/source/crates/vakint)
  284. 22.78 s [gammaloop-workspace-clippy] Checking phf v0.13.1
  285. 22.79 s [gammaloop-workspace-clippy] Checking version-compare v0.2.1
  286. 22.81 s [gammaloop-workspace-clippy] Checking xpct v0.5.1
  287. 22.88 s [gammaloop-workspace-clippy] Checking ryu v1.0.23
  288. 22.91 s [gammaloop-workspace-clippy] Checking castaway v0.2.4
  289. 22.95 s [gammaloop-workspace-clippy] Checking toml_datetime v0.7.5+spec-1.1.0
  290. 22.97 s [gammaloop-workspace-clippy] Checking strum v0.27.2
  291. 23.04 s [gammaloop-workspace-clippy] Checking unicode-truncate v2.0.1
  292. 23.09 s [gammaloop-workspace-clippy] Checking kasuari v0.4.12
  293. 23.13 s [gammaloop-workspace-clippy] Checking compact_str v0.9.0
  294. 23.16 s [gammaloop-workspace-clippy] Checking lru v0.16.4
  295. 23.20 s [gammaloop-workspace-clippy] Checking figment v0.10.19
  296. 23.28 s [gammaloop-workspace-clippy] Checking toml v0.9.12+spec-1.1.0
  297. 23.30 s [gammaloop-workspace-clippy] Checking vte v0.15.0
  298. 23.39 s [gammaloop-workspace-clippy] Checking portable-atomic v1.13.1
  299. 23.45 s [gammaloop-workspace-clippy] Checking string-template-plus v0.4.3
  300. 23.47 s [gammaloop-workspace-clippy] Checking vt100 v0.16.2
  301. 23.48 s [gammaloop-workspace-clippy] Checking unit-prefix v0.5.2
  302. 23.61 s [gammaloop-workspace-clippy] Checking rand_distr v0.4.3
  303. 23.68 s [gammaloop-workspace-clippy] Checking simba v0.6.0
  304. 23.70 s [gammaloop-workspace-clippy] Checking line-clipping v0.3.7
  305. 23.86 s [gammaloop-workspace-clippy] Checking gimli v0.32.3
  306. 23.97 s [gammaloop-workspace-clippy] Compiling three-dimensional-reps v0.1.0 (/build/source/crates/three-dimensional-reps)
  307. 24.07 s [gammaloop-workspace-clippy] Checking adler2 v2.0.1
  308. 24.15 s [gammaloop-workspace-clippy] Checking miniz_oxide v0.8.9
  309. 24.26 s [gammaloop-workspace-clippy] Checking ratatui-core v0.1.0
  310. 24.29 s [gammaloop-workspace-clippy] Checking thiserror v1.0.69
  311. 24.34 s [gammaloop-workspace-clippy] Checking derive_builder v0.11.2
  312. 24.35 s [gammaloop-workspace-clippy] Checking crossterm v0.29.0
  313. 24.42 s [gammaloop-workspace-clippy] Checking owo-colors v4.3.0
  314. 24.44 s [gammaloop-workspace-clippy] Checking object v0.37.3
  315. 24.46 s [gammaloop-workspace-clippy] Checking tracing-error v0.2.1
  316. 24.48 s [gammaloop-workspace-clippy] Checking indicatif v0.18.4
  317. 24.52 s [gammaloop-workspace-clippy] Checking typed-index-collections v3.5.0
  318. 24.79 s [gammaloop-workspace-clippy] Checking serde-big-array v0.5.1
  319. 25.00 s [gammaloop-workspace-clippy] Checking amd v0.2.2
  320. 25.11 s [gammaloop-workspace-clippy] Checking itertools v0.11.0
  321. 25.19 s [gammaloop-workspace-clippy] Compiling gammaloop-tracing-filter-macros v0.1.0 (/build/source/crates/gammaloop-tracing-filter-macros)
  322. 25.21 s [gammaloop-workspace-clippy] Checking rustc-demangle v0.1.27
  323. 25.31 s [gammaloop-workspace-clippy] Checking option-ext v0.2.0
  324. 25.34 s [gammaloop-workspace-clippy] Checking env_logger v0.11.10
  325. 25.38 s [gammaloop-workspace-clippy] Checking dirs-sys v0.5.0
  326. 25.40 s [gammaloop-workspace-clippy] Checking ref-cast v1.0.25
  327. 25.47 s [gammaloop-workspace-clippy] Checking nix v0.31.2
  328. 25.49 s [gammaloop-workspace-clippy] Checking color-spantrace v0.3.0
  329. 25.51 s [gammaloop-workspace-clippy] Checking integer-sqrt v0.1.5
  330. 25.60 s [gammaloop-workspace-clippy] Checking brotli-decompressor v4.0.3
  331. 25.66 s [gammaloop-workspace-clippy] Checking crossbeam-channel v0.5.15
  332. 25.70 s [gammaloop-workspace-clippy] Checking itertools v0.12.1
  333. 25.71 s [gammaloop-workspace-clippy] Checking rkyv v0.7.46
  334. 25.76 s [gammaloop-workspace-clippy] Checking unsafe-libyaml v0.2.11
  335. 25.79 s [gammaloop-workspace-clippy] Compiling gammalooprs v0.3.4 (/build/source/crates/gammalooprs)
  336. 25.82 s [gammaloop-workspace-clippy] Checking ratatui-widgets v0.3.0
  337. 26.20 s [gammaloop-workspace-clippy] Checking ratatui-crossterm v0.1.0
  338. 26.34 s [gammaloop-workspace-clippy] Checking symlink v0.1.0
  339. 26.44 s [gammaloop-workspace-clippy] Checking tracing-appender v0.2.5
  340. 26.48 s [gammaloop-workspace-clippy] Checking include_dir v0.7.4
  341. 26.52 s [gammaloop-workspace-clippy] Checking ctrlc v3.5.2
  342. 26.58 s [gammaloop-workspace-clippy] Checking pathfinding v4.15.0
  343. 26.62 s [gammaloop-workspace-clippy] Checking dirs v6.0.0
  344. 26.68 s [gammaloop-workspace-clippy] Checking clarabel v0.11.1
  345. 26.71 s [gammaloop-workspace-clippy] Checking schemars v1.2.1
  346. 26.91 s [gammaloop-workspace-clippy] Checking brotli v7.0.0
  347. 26.96 s [gammaloop-workspace-clippy] Checking slotmap v1.1.1
  348. 27.06 s [gammaloop-workspace-clippy] Checking serde_yaml v0.9.34+deprecated
  349. 27.26 s [gammaloop-workspace-clippy] Checking tracing-indicatif v0.3.14
  350. 27.50 s [gammaloop-workspace-clippy] Checking json5 v0.4.1
  351. 27.59 s [gammaloop-workspace-clippy] Checking ratatui-macros v0.7.0
  352. 27.70 s [gammaloop-workspace-clippy] Checking vectorize v0.2.0
  353. 27.74 s [gammaloop-workspace-clippy] Checking ratatui v0.30.0
  354. 27.76 s [gammaloop-workspace-clippy] Checking ringbuffer v0.16.0
  355. 27.82 s [gammaloop-workspace-clippy] Checking base62 v2.2.4
  356. 27.84 s [gammaloop-workspace-clippy] Checking rust-embed v8.11.0
  357. 27.87 s [gammaloop-workspace-clippy] Checking clap_complete v4.6.3
  358. 27.98 s [gammaloop-workspace-clippy] Checking strip-ansi-escapes v0.2.1
  359. 28.08 s [gammaloop-workspace-clippy] Checking fd-lock v4.0.4
  360. 28.10 s [gammaloop-workspace-clippy] Compiling gammaloop-api v0.1.0 (/build/source/crates/gammaloop-api)
  361. 28.12 s [gammaloop-workspace-clippy] Checking itertools v0.13.0
  362. 28.22 s [gammaloop-workspace-clippy] Checking strum v0.26.3
  363. 28.25 s [gammaloop-workspace-clippy] Compiling numerica v2.2.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  364. 28.28 s [gammaloop-workspace-clippy] Checking addr2line v0.25.1
  365. 28.39 s [gammaloop-workspace-clippy] Checking clap_complete_nushell v4.6.0
  366. 28.40 s [gammaloop-workspace-clippy] Checking sysinfo v0.33.1
  367. 28.46 s [gammaloop-workspace-clippy] Checking shlex v1.3.0
  368. 28.61 s [gammaloop-workspace-clippy] Checking futures-task v0.3.32
  369. 28.62 s [gammaloop-workspace-clippy] Checking futures-core v0.3.32
  370. 28.70 s [gammaloop-workspace-clippy] Checking slab v0.4.12
  371. 28.74 s [gammaloop-workspace-clippy] Checking sdd v3.0.10
  372. 28.76 s [gammaloop-workspace-clippy] Compiling gammaloop-integration-tests v0.1.0 (/build/source/tests)
  373. 28.80 s [gammaloop-workspace-clippy] Compiling test-log-core v0.2.20
  374. 28.84 s [gammaloop-workspace-clippy] Checking futures-util v0.3.32
  375. 28.99 s [gammaloop-workspace-clippy] Compiling rustc_version v0.4.1
  376. 29.03 s [gammaloop-workspace-clippy] Checking scc v2.4.0
  377. 29.40 s [gammaloop-workspace-clippy] Checking which v8.0.2
  378. 29.56 s [gammaloop-workspace-clippy] Checking nalgebra v0.29.0
  379. 29.69 s [gammaloop-workspace-clippy] Checking bincode v1.3.3
  380. 29.75 s [gammaloop-workspace-clippy] Compiling gungraun-runner v0.18.2
  381. 29.87 s [gammaloop-workspace-clippy] Checking backtrace v0.3.76
  382. 30.23 s [gammaloop-workspace-clippy] Compiling gungraun-macros v0.8.0
  383. 30.37 s [gammaloop-workspace-clippy] Checking proc-macro2 v1.0.106
  384. 30.43 s [gammaloop-workspace-clippy] Checking color-eyre v0.6.5
  385. 30.78 s [gammaloop-workspace-clippy] Checking reedline v0.42.0
  386. 30.80 s [gammaloop-workspace-clippy] Checking maplit v1.0.2
  387. 30.88 s [gammaloop-workspace-clippy] Checking base64 v0.21.7
  388. 30.96 s [gammaloop-workspace-clippy] Compiling iai-callgrind-runner v0.14.2
  389. 31.12 s [gammaloop-workspace-clippy] Checking quote v1.0.45
  390. 31.28 s [gammaloop-workspace-clippy] Checking kurbo v0.13.0
  391. 31.36 s [gammaloop-workspace-clippy] Checking wait-timeout v0.2.1
  392. 31.40 s [gammaloop-workspace-clippy] Checking ron v0.8.1
  393. 31.42 s [gammaloop-workspace-clippy] Checking quick-error v1.2.3
  394. 31.45 s [gammaloop-workspace-clippy] Checking futures-executor v0.3.32
  395. 31.51 s [gammaloop-workspace-clippy] Compiling iai-callgrind v0.14.2
  396. 31.53 s [gammaloop-workspace-clippy] Checking bit-vec v0.8.0
  397. 31.67 s [gammaloop-workspace-clippy] Checking serial_test v3.4.0
  398. 31.75 s [gammaloop-workspace-clippy] Checking bit-set v0.8.0
  399. 31.80 s [gammaloop-workspace-clippy] Checking rusty-fork v0.3.1
  400. 31.97 s [gammaloop-workspace-clippy] Checking syn v2.0.117
  401. 31.99 s [gammaloop-workspace-clippy] Compiling iai-callgrind-macros v0.5.1
  402. 32.03 s [gammaloop-workspace-clippy] Checking rand_xorshift v0.4.0
  403. 32.22 s [gammaloop-workspace-clippy] Checking console v0.15.11
  404. 32.24 s [gammaloop-workspace-clippy] Checking pathdiff v0.2.3
  405. 32.29 s [gammaloop-workspace-clippy] Checking unarray v0.1.4
  406. 32.43 s [gammaloop-workspace-clippy] Checking proptest v1.11.0
  407. 32.46 s [gammaloop-workspace-clippy] Compiling test-log-macros v0.2.20
  408. 32.60 s [gammaloop-workspace-clippy] Checking kurvst v0.1.0 (/build/source/crates/kurvst)
  409. 32.75 s [gammaloop-workspace-clippy] Checking similar-asserts v1.7.0
  410. 33.18 s [gammaloop-workspace-clippy] Checking clinnet v0.1.8 (/build/source/crates/clinnet)
  411. 33.59 s [gammaloop-workspace-clippy] Compiling graphica v2.1.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  412. 36.89 s [gammaloop-workspace-clippy] Checking test-log v0.2.20
  413. 38.72 s [gammaloop-workspace-clippy] Checking statrs v0.16.1
  414. 40.88 s [gammaloop-workspace-clippy] Checking momtrop v0.3.0
  415. 48.53 s [gammaloop-workspace-clippy] Compiling pyo3-macros v0.28.3
  416. 49.66 s [gammaloop-workspace-clippy] Checking gungraun v0.18.2
  417. 50.67 s [gammaloop-workspace-clippy] Compiling pyo3-stub-gen-derive v0.17.2
  418. 59.21 s [gammaloop-workspace-clippy] Checking pyo3-stub-gen v0.17.2
  419. 72.18 s [gammaloop-workspace-clippy] Checking symbolica-utils v0.1.0 (/build/source/crates/symbolica-utils)
  420. 72.18 s [gammaloop-workspace-clippy] Checking spenso-macros v0.3.2 (/build/source/crates/spenso-macros)
  421. 325.64 s [gammaloop-workspace-clippy] Compiling gammaloop-workspace-hack v0.1.0 (/build/source/crates/gammaloop-workspace-hack)
  422. 325.92 s [gammaloop-workspace-clippy] Checking linnet v0.17.0 (/build/source/crates/linnet)
  423. 332.01 s [gammaloop-workspace-clippy] Checking spenso v0.6.0 (/build/source/crates/spenso)
  424. 332.01 s [gammaloop-workspace-clippy] Checking linnet-py v0.1.0 (/build/source/crates/linnet-py)
  425. 332.01 s [gammaloop-workspace-clippy] Checking linnest v0.1.0 (/build/source/crates/linnest)
  426. 341.25 s [gammaloop-workspace-clippy] Checking idenso v0.3.0 (/build/source/crates/idenso)
  427. 341.25 s [gammaloop-workspace-clippy] Checking gammaloop-tracing-filter v0.1.0 (/build/source/crates/gammaloop-tracing-filter)
  428. 344.66 s [gammaloop-workspace-clippy] Checking spenso-hep-lib v0.1.7 (/build/source/crates/spenso-hep-lib)
  429. 344.98 s [gammaloop-workspace-clippy] Checking spynso3 v0.1.2 (/build/source/crates/spynso3)
  430. 377.19 s [gammaloop-workspace-clippy] error: manual implementation of an assign operation
  431. 377.19 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/gammaloop_sample.rs:755:21
  432. 377.19 s [gammaloop-workspace-clippy] |
  433. 377.19 s [gammaloop-workspace-clippy] 755 | sample.sample.jacobian = sample.sample.jacobian * F::from_f64(partition_weight);
  434. 377.19 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace it with: `sample.sample.jacobian *= F::from_f64(partition_weight)`
  435. 377.19 s [gammaloop-workspace-clippy] |
  436. 377.19 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#assign_op_pattern
  437. 377.19 s [gammaloop-workspace-clippy] = note: `-D clippy::assign-op-pattern` implied by `-D warnings`
  438. 377.19 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::assign_op_pattern)]`
  439. 377.19 s [gammaloop-workspace-clippy]
  440. 377.37 s [gammaloop-workspace-clippy] error: doc list item without indentation
  441. 377.37 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:311:5
  442. 377.37 s [gammaloop-workspace-clippy] |
  443. 377.37 s [gammaloop-workspace-clippy] 311 | /// a selected LMB into a parent frame; graph code supplies the matrix and
  444. 377.37 s [gammaloop-workspace-clippy] | ^
  445. 377.37 s [gammaloop-workspace-clippy] |
  446. 377.37 s [gammaloop-workspace-clippy] = help: if this is supposed to be its own paragraph, add a blank line
  447. 377.37 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#doc_lazy_continuation
  448. 377.37 s [gammaloop-workspace-clippy] = note: `-D clippy::doc-lazy-continuation` implied by `-D warnings`
  449. 377.37 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::doc_lazy_continuation)]`
  450. 377.37 s [gammaloop-workspace-clippy] help: indent this line
  451. 377.37 s [gammaloop-workspace-clippy] |
  452. 377.37 s [gammaloop-workspace-clippy] 311 | /// a selected LMB into a parent frame; graph code supplies the matrix and
  453. 377.37 s [gammaloop-workspace-clippy] | ++
  454. 377.37 s [gammaloop-workspace-clippy]
  455. 377.37 s [gammaloop-workspace-clippy] error: doc list item without indentation
  456. 377.37 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:312:5
  457. 377.37 s [gammaloop-workspace-clippy] |
  458. 377.37 s [gammaloop-workspace-clippy] 312 | /// translation after resolving the relevant edge signatures and external data.
  459. 377.37 s [gammaloop-workspace-clippy] | ^
  460. 377.37 s [gammaloop-workspace-clippy] |
  461. 377.37 s [gammaloop-workspace-clippy] = help: if this is supposed to be its own paragraph, add a blank line
  462. 377.37 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#doc_lazy_continuation
  463. 377.37 s [gammaloop-workspace-clippy] help: indent this line
  464. 377.37 s [gammaloop-workspace-clippy] |
  465. 377.37 s [gammaloop-workspace-clippy] 312 | /// translation after resolving the relevant edge signatures and external data.
  466. 377.37 s [gammaloop-workspace-clippy] | ++
  467. 377.37 s [gammaloop-workspace-clippy]
  468. 377.37 s [gammaloop-workspace-clippy] error: the loop variable `column` is only used to index `augmented`
  469. 377.37 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:404:31
  470. 377.37 s [gammaloop-workspace-clippy] |
  471. 377.37 s [gammaloop-workspace-clippy] 404 | for column in 0..2 * dimension {
  472. 377.37 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^
  473. 377.37 s [gammaloop-workspace-clippy] |
  474. 377.37 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#needless_range_loop
  475. 377.37 s [gammaloop-workspace-clippy] = note: `-D clippy::needless-range-loop` implied by `-D warnings`
  476. 377.37 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::needless_range_loop)]`
  477. 377.37 s [gammaloop-workspace-clippy] help: consider using an iterator
  478. 377.37 s [gammaloop-workspace-clippy] |
  479. 377.37 s [gammaloop-workspace-clippy] 404 - for column in 0..2 * dimension {
  480. 377.37 s [gammaloop-workspace-clippy] 404 + for <item> in augmented.iter_mut().take(2 * dimension) {
  481. 377.37 s [gammaloop-workspace-clippy] |
  482. 377.37 s [gammaloop-workspace-clippy]
  483. 377.43 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  484. 377.43 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:1915:9
  485. 377.43 s [gammaloop-workspace-clippy] |
  486. 377.43 s [gammaloop-workspace-clippy] 1915 | / if let SamplingMapDefinition::Lmb(edges) = &definition {
  487. 377.43 s [gammaloop-workspace-clippy] 1916 | | if edges.len() != n_loop_momenta {
  488. 377.43 s [gammaloop-workspace-clippy] 1917 | | return Err(eyre!(
  489. 377.43 s [gammaloop-workspace-clippy] 1918 | | "lmb definition has {} edges, but the kernel has {} loop coordinates",
  490. 377.43 s [gammaloop-workspace-clippy] ... |
  491. 377.43 s [gammaloop-workspace-clippy] 1923 | | }
  492. 377.43 s [gammaloop-workspace-clippy] | |_________^
  493. 377.43 s [gammaloop-workspace-clippy] |
  494. 377.43 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  495. 377.43 s [gammaloop-workspace-clippy] = note: `-D clippy::collapsible-if` implied by `-D warnings`
  496. 377.43 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::collapsible_if)]`
  497. 377.43 s [gammaloop-workspace-clippy] help: collapse nested if block
  498. 377.43 s [gammaloop-workspace-clippy] |
  499. 377.43 s [gammaloop-workspace-clippy] 1915 ~ if let SamplingMapDefinition::Lmb(edges) = &definition
  500. 377.43 s [gammaloop-workspace-clippy] 1916 ~ && edges.len() != n_loop_momenta {
  501. 377.43 s [gammaloop-workspace-clippy] 1917 | return Err(eyre!(
  502. 377.43 s [gammaloop-workspace-clippy] ...
  503. 377.43 s [gammaloop-workspace-clippy] 1921 | ));
  504. 377.43 s [gammaloop-workspace-clippy] 1922 ~ }
  505. 377.43 s [gammaloop-workspace-clippy] |
  506. 377.43 s [gammaloop-workspace-clippy]
  507. 377.45 s [gammaloop-workspace-clippy] error: manual implementation of `.is_multiple_of()`
  508. 377.45 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_reference.rs:135:12
  509. 377.45 s [gammaloop-workspace-clippy] |
  510. 377.45 s [gammaloop-workspace-clippy] 135 | if center.len() % 3 != 0 {
  511. 377.45 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^ help: replace with: `!center.len().is_multiple_of(3)`
  512. 377.45 s [gammaloop-workspace-clippy] |
  513. 377.45 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#manual_is_multiple_of
  514. 377.45 s [gammaloop-workspace-clippy] = note: `-D clippy::manual-is-multiple-of` implied by `-D warnings`
  515. 377.45 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::manual_is_multiple_of)]`
  516. 377.45 s [gammaloop-workspace-clippy]
  517. 377.50 s [gammaloop-workspace-clippy] error: manual implementation of `.is_multiple_of()`
  518. 377.50 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:758:47
  519. 377.50 s [gammaloop-workspace-clippy] |
  520. 377.50 s [gammaloop-workspace-clippy] 758 | if self.raw_coordinates.is_empty() || self.raw_coordinates.len() % 3 != 0 {
  521. 377.50 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `!self.raw_coordinates.len().is_multiple_of(3)`
  522. 377.50 s [gammaloop-workspace-clippy] |
  523. 377.50 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#manual_is_multiple_of
  524. 377.50 s [gammaloop-workspace-clippy]
  525. 377.51 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  526. 377.51 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1214:5
  527. 377.51 s [gammaloop-workspace-clippy] |
  528. 377.51 s [gammaloop-workspace-clippy] 1214 | / if let Some(graph_id) = context.graph_id {
  529. 377.51 s [gammaloop-workspace-clippy] 1215 | | if graph_id != prepared.graph_id {
  530. 377.51 s [gammaloop-workspace-clippy] 1216 | | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  531. 377.51 s [gammaloop-workspace-clippy] 1217 | | channel: channel.to_owned(),
  532. 377.51 s [gammaloop-workspace-clippy] ... |
  533. 377.51 s [gammaloop-workspace-clippy] 1224 | | }
  534. 377.51 s [gammaloop-workspace-clippy] | |_____^
  535. 377.51 s [gammaloop-workspace-clippy] |
  536. 377.51 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  537. 377.51 s [gammaloop-workspace-clippy] help: collapse nested if block
  538. 377.51 s [gammaloop-workspace-clippy] |
  539. 377.51 s [gammaloop-workspace-clippy] 1214 ~ if let Some(graph_id) = context.graph_id
  540. 377.51 s [gammaloop-workspace-clippy] 1215 ~ && graph_id != prepared.graph_id {
  541. 377.51 s [gammaloop-workspace-clippy] 1216 | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  542. 377.51 s [gammaloop-workspace-clippy] ...
  543. 377.51 s [gammaloop-workspace-clippy] 1222 | });
  544. 377.51 s [gammaloop-workspace-clippy] 1223 ~ }
  545. 377.51 s [gammaloop-workspace-clippy] |
  546. 377.51 s [gammaloop-workspace-clippy]
  547. 377.51 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  548. 377.51 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1234:5
  549. 377.51 s [gammaloop-workspace-clippy] |
  550. 377.51 s [gammaloop-workspace-clippy] 1234 | / if let Some(cut_id) = context.cut_id {
  551. 377.51 s [gammaloop-workspace-clippy] 1235 | | if cut_id != prepared.cut_id {
  552. 377.51 s [gammaloop-workspace-clippy] 1236 | | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  553. 377.51 s [gammaloop-workspace-clippy] 1237 | | channel: channel.to_owned(),
  554. 377.51 s [gammaloop-workspace-clippy] ... |
  555. 377.51 s [gammaloop-workspace-clippy] 1244 | | }
  556. 377.51 s [gammaloop-workspace-clippy] | |_____^
  557. 377.51 s [gammaloop-workspace-clippy] |
  558. 377.51 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  559. 377.51 s [gammaloop-workspace-clippy] help: collapse nested if block
  560. 377.51 s [gammaloop-workspace-clippy] |
  561. 377.51 s [gammaloop-workspace-clippy] 1234 ~ if let Some(cut_id) = context.cut_id
  562. 377.51 s [gammaloop-workspace-clippy] 1235 ~ && cut_id != prepared.cut_id {
  563. 377.51 s [gammaloop-workspace-clippy] 1236 | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  564. 377.51 s [gammaloop-workspace-clippy] ...
  565. 377.51 s [gammaloop-workspace-clippy] 1242 | });
  566. 377.51 s [gammaloop-workspace-clippy] 1243 ~ }
  567. 377.51 s [gammaloop-workspace-clippy] |
  568. 377.51 s [gammaloop-workspace-clippy]
  569. 377.52 s [gammaloop-workspace-clippy] error: very complex type used. Consider factoring parts into `type` definitions
  570. 377.52 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1543:6
  571. 377.52 s [gammaloop-workspace-clippy] |
  572. 377.52 s [gammaloop-workspace-clippy] 1543 | ) -> Result<
  573. 377.52 s [gammaloop-workspace-clippy] | ______^
  574. 377.52 s [gammaloop-workspace-clippy] 1544 | | (
  575. 377.52 s [gammaloop-workspace-clippy] 1545 | | Vec<Box<dyn SamplingMapComponent>>,
  576. 377.52 s [gammaloop-workspace-clippy] 1546 | | Vec<Vec<usize>>,
  577. 377.52 s [gammaloop-workspace-clippy] ... |
  578. 377.52 s [gammaloop-workspace-clippy] 1549 | | SamplingChannelCompileError,
  579. 377.52 s [gammaloop-workspace-clippy] 1550 | | > {
  580. 377.52 s [gammaloop-workspace-clippy] | |_^
  581. 377.52 s [gammaloop-workspace-clippy] |
  582. 377.52 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#type_complexity
  583. 377.52 s [gammaloop-workspace-clippy] = note: `-D clippy::type-complexity` implied by `-D warnings`
  584. 377.52 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::type_complexity)]`
  585. 377.52 s [gammaloop-workspace-clippy]
  586. 377.55 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  587. 377.55 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2224:13
  588. 377.55 s [gammaloop-workspace-clippy] |
  589. 377.55 s [gammaloop-workspace-clippy] 2224 | / if let SamplingChannelSelector::Named(name) = selector {
  590. 377.55 s [gammaloop-workspace-clippy] 2225 | | if let Some(channel) = resolved.named(name) {
  591. 377.55 s [gammaloop-workspace-clippy] 2226 | | let entry = SamplingCatalogueEntry::Named(channel.clone());
  592. 377.55 s [gammaloop-workspace-clippy] 2227 | | if !entries.contains(&entry) {
  593. 377.55 s [gammaloop-workspace-clippy] ... |
  594. 377.55 s [gammaloop-workspace-clippy] 2231 | | }
  595. 377.55 s [gammaloop-workspace-clippy] | |_____________^
  596. 377.55 s [gammaloop-workspace-clippy] |
  597. 377.55 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  598. 377.55 s [gammaloop-workspace-clippy] help: collapse nested if block
  599. 377.55 s [gammaloop-workspace-clippy] |
  600. 377.55 s [gammaloop-workspace-clippy] 2224 ~ if let SamplingChannelSelector::Named(name) = selector
  601. 377.55 s [gammaloop-workspace-clippy] 2225 ~ && let Some(channel) = resolved.named(name) {
  602. 377.55 s [gammaloop-workspace-clippy] 2226 | let entry = SamplingCatalogueEntry::Named(channel.clone());
  603. 377.55 s [gammaloop-workspace-clippy] ...
  604. 377.55 s [gammaloop-workspace-clippy] 2229 | }
  605. 377.55 s [gammaloop-workspace-clippy] 2230 ~ }
  606. 377.55 s [gammaloop-workspace-clippy] |
  607. 377.55 s [gammaloop-workspace-clippy]
  608. 377.55 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  609. 377.55 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2249:13
  610. 377.55 s [gammaloop-workspace-clippy] |
  611. 377.55 s [gammaloop-workspace-clippy] 2249 | / if basis_ids.is_empty() && optimized_lmbs.is_empty() {
  612. 377.55 s [gammaloop-workspace-clippy] 2250 | | if let Some((basis_id, _)) = all_lmbs.first() {
  613. 377.55 s [gammaloop-workspace-clippy] 2251 | | basis_ids.push(*basis_id);
  614. 377.55 s [gammaloop-workspace-clippy] 2252 | | }
  615. 377.55 s [gammaloop-workspace-clippy] 2253 | | }
  616. 377.55 s [gammaloop-workspace-clippy] | |_____________^
  617. 377.55 s [gammaloop-workspace-clippy] |
  618. 377.55 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  619. 377.55 s [gammaloop-workspace-clippy] help: collapse nested if block
  620. 377.55 s [gammaloop-workspace-clippy] |
  621. 377.55 s [gammaloop-workspace-clippy] 2249 ~ if basis_ids.is_empty() && optimized_lmbs.is_empty()
  622. 377.55 s [gammaloop-workspace-clippy] 2250 ~ && let Some((basis_id, _)) = all_lmbs.first() {
  623. 377.55 s [gammaloop-workspace-clippy] 2251 | basis_ids.push(*basis_id);
  624. 377.55 s [gammaloop-workspace-clippy] 2252 ~ }
  625. 377.55 s [gammaloop-workspace-clippy] |
  626. 377.55 s [gammaloop-workspace-clippy]
  627. 377.70 s [gammaloop-workspace-clippy] error: using `clone` on type `Complex<F<f64>>` which implements the `Copy` trait
  628. 377.70 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:160:32
  629. 377.70 s [gammaloop-workspace-clippy] |
  630. 377.70 s [gammaloop-workspace-clippy] 160 | value: value.values[0].clone(),
  631. 377.70 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `value.values[0]`
  632. 377.70 s [gammaloop-workspace-clippy] |
  633. 377.70 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  634. 377.70 s [gammaloop-workspace-clippy] = note: `-D clippy::clone-on-copy` implied by `-D warnings`
  635. 377.70 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::clone_on_copy)]`
  636. 377.70 s [gammaloop-workspace-clippy]
  637. 377.70 s [gammaloop-workspace-clippy] error: the loop variable `column` is only used to index `work`
  638. 377.70 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:324:27
  639. 377.70 s [gammaloop-workspace-clippy] |
  640. 377.70 s [gammaloop-workspace-clippy] 324 | for column in (pivot + 1)..dimension {
  641. 377.70 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^
  642. 377.70 s [gammaloop-workspace-clippy] |
  643. 377.70 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#needless_range_loop
  644. 377.70 s [gammaloop-workspace-clippy] help: consider using an iterator
  645. 377.70 s [gammaloop-workspace-clippy] |
  646. 377.70 s [gammaloop-workspace-clippy] 324 - for column in (pivot + 1)..dimension {
  647. 377.70 s [gammaloop-workspace-clippy] 324 + for <item> in work.iter_mut().take(dimension).skip((pivot + 1)) {
  648. 377.70 s [gammaloop-workspace-clippy] |
  649. 377.70 s [gammaloop-workspace-clippy]
  650. 378.48 s [gammaloop-workspace-clippy] error: you seem to be trying to use `match` to destructure a single infallible pattern. Consider using `let`
  651. 378.48 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrate/mod.rs:3342:5
  652. 378.48 s [gammaloop-workspace-clippy] |
  653. 378.48 s [gammaloop-workspace-clippy] 3342 | / let process_integrand = match integrand {
  654. 378.48 s [gammaloop-workspace-clippy] 3343 | | Integrand::ProcessIntegrand(process_integrand) => process_integrand,
  655. 378.48 s [gammaloop-workspace-clippy] 3344 | | #[cfg(test)]
  656. 378.48 s [gammaloop-workspace-clippy] 3345 | | Integrand::TestProbe(_) => return Vec::new(),
  657. 378.48 s [gammaloop-workspace-clippy] 3346 | | };
  658. 378.48 s [gammaloop-workspace-clippy] | |______^ help: try: `let Integrand::ProcessIntegrand(process_integrand) = integrand;`
  659. 378.48 s [gammaloop-workspace-clippy] |
  660. 378.48 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#infallible_destructuring_match
  661. 378.48 s [gammaloop-workspace-clippy] = note: `-D clippy::infallible-destructuring-match` implied by `-D warnings`
  662. 378.48 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::infallible_destructuring_match)]`
  663. 378.48 s [gammaloop-workspace-clippy]
  664. 378.48 s [gammaloop-workspace-clippy] error: you seem to be trying to use `match` to destructure a single infallible pattern. Consider using `let`
  665. 378.48 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrate/mod.rs:3359:5
  666. 378.48 s [gammaloop-workspace-clippy] |
  667. 378.48 s [gammaloop-workspace-clippy] 3359 | / let process_integrand = match integrand {
  668. 378.48 s [gammaloop-workspace-clippy] 3360 | | Integrand::ProcessIntegrand(process_integrand) => process_integrand,
  669. 378.48 s [gammaloop-workspace-clippy] 3361 | | #[cfg(test)]
  670. 378.48 s [gammaloop-workspace-clippy] 3362 | | Integrand::TestProbe(_) => return false,
  671. 378.48 s [gammaloop-workspace-clippy] 3363 | | };
  672. 378.48 s [gammaloop-workspace-clippy] | |______^ help: try: `let Integrand::ProcessIntegrand(process_integrand) = integrand;`
  673. 378.48 s [gammaloop-workspace-clippy] |
  674. 378.48 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#infallible_destructuring_match
  675. 378.48 s [gammaloop-workspace-clippy]
  676. 381.13 s [gammaloop-workspace-clippy] error: this `impl` can be derived
  677. 381.13 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/settings/runtime.rs:1259:1
  678. 381.13 s [gammaloop-workspace-clippy] |
  679. 381.13 s [gammaloop-workspace-clippy] 1259 | / impl Default for SamplingChannelDefinition {
  680. 381.13 s [gammaloop-workspace-clippy] 1260 | | fn default() -> Self {
  681. 381.13 s [gammaloop-workspace-clippy] 1261 | | Self {
  682. 381.13 s [gammaloop-workspace-clippy] 1262 | | around: String::new(),
  683. 381.13 s [gammaloop-workspace-clippy] ... |
  684. 381.13 s [gammaloop-workspace-clippy] 1268 | | }
  685. 381.13 s [gammaloop-workspace-clippy] | |_^
  686. 381.13 s [gammaloop-workspace-clippy] |
  687. 381.13 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#derivable_impls
  688. 381.13 s [gammaloop-workspace-clippy] = note: `-D clippy::derivable-impls` implied by `-D warnings`
  689. 381.13 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::derivable_impls)]`
  690. 381.13 s [gammaloop-workspace-clippy] help: replace the manual implementation with a derive attribute
  691. 381.13 s [gammaloop-workspace-clippy] |
  692. 381.13 s [gammaloop-workspace-clippy] 1249 + #[derive(Default)]
  693. 381.13 s [gammaloop-workspace-clippy] 1250 | pub struct SamplingChannelDefinition {
  694. 381.13 s [gammaloop-workspace-clippy] |
  695. 381.13 s [gammaloop-workspace-clippy]
  696. 381.14 s [gammaloop-workspace-clippy] error: this `impl` can be derived
  697. 381.14 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/settings/runtime.rs:1285:1
  698. 381.14 s [gammaloop-workspace-clippy] |
  699. 381.14 s [gammaloop-workspace-clippy] 1285 | / impl Default for SamplingChannelSelection {
  700. 381.14 s [gammaloop-workspace-clippy] 1286 | | fn default() -> Self {
  701. 381.14 s [gammaloop-workspace-clippy] 1287 | | Self {
  702. 381.14 s [gammaloop-workspace-clippy] 1288 | | weight: SamplingChannelWeight::default(),
  703. 381.14 s [gammaloop-workspace-clippy] ... |
  704. 381.14 s [gammaloop-workspace-clippy] 1294 | | }
  705. 381.14 s [gammaloop-workspace-clippy] | |_^
  706. 381.14 s [gammaloop-workspace-clippy] |
  707. 381.14 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#derivable_impls
  708. 381.14 s [gammaloop-workspace-clippy] help: replace the manual implementation with a derive attribute
  709. 381.14 s [gammaloop-workspace-clippy] |
  710. 381.14 s [gammaloop-workspace-clippy] 1277 + #[derive(Default)]
  711. 381.14 s [gammaloop-workspace-clippy] 1278 | pub struct SamplingChannelSelection {
  712. 381.14 s [gammaloop-workspace-clippy] |
  713. 381.14 s [gammaloop-workspace-clippy]
  714. 384.51 s [gammaloop-workspace-clippy] error: could not compile `gammalooprs` (lib) due to 18 previous errors
  715. 384.51 s [gammaloop-workspace-clippy] warning: build failed, waiting for other jobs to finish...
  716. 386.79 s [gammaloop-workspace-clippy] error: using `clone` on type `F<f64>` which implements the `Copy` trait
  717. 386.79 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:2358:14
  718. 386.79 s [gammaloop-workspace-clippy] |
  719. 386.79 s [gammaloop-workspace-clippy] 2358 | (point.jacobian.clone() * point.inverse_jacobian.clone() - F(1.0)).abs() < F(1.0e-12)
  720. 386.79 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `point.jacobian`
  721. 386.79 s [gammaloop-workspace-clippy] |
  722. 386.79 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  723. 386.79 s [gammaloop-workspace-clippy] = note: `-D clippy::clone-on-copy` implied by `-D warnings`
  724. 386.79 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::clone_on_copy)]`
  725. 386.79 s [gammaloop-workspace-clippy]
  726. 386.79 s [gammaloop-workspace-clippy] error: using `clone` on type `F<f64>` which implements the `Copy` trait
  727. 386.79 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:2358:39
  728. 386.79 s [gammaloop-workspace-clippy] |
  729. 386.79 s [gammaloop-workspace-clippy] 2358 | (point.jacobian.clone() * point.inverse_jacobian.clone() - F(1.0)).abs() < F(1.0e-12)
  730. 386.79 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `point.inverse_jacobian`
  731. 386.79 s [gammaloop-workspace-clippy] |
  732. 386.79 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  733. 386.79 s [gammaloop-workspace-clippy]
  734. 386.96 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  735. 386.96 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2725:9
  736. 386.96 s [gammaloop-workspace-clippy] |
  737. 386.96 s [gammaloop-workspace-clippy] 2725 | selection.default_channel_selection = vec!["missing".into()];
  738. 386.96 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  739. 386.96 s [gammaloop-workspace-clippy] |
  740. 386.96 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["missing".into()], ..Default::default() }` and removing relevant reassignments
  741. 386.96 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2724:9
  742. 386.96 s [gammaloop-workspace-clippy] |
  743. 386.96 s [gammaloop-workspace-clippy] 2724 | let mut selection = SamplingChannelSelection::default();
  744. 386.96 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  745. 386.96 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  746. 386.96 s [gammaloop-workspace-clippy] = note: `-D clippy::field-reassign-with-default` implied by `-D warnings`
  747. 386.96 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::field_reassign_with_default)]`
  748. 386.96 s [gammaloop-workspace-clippy]
  749. 386.96 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  750. 386.96 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2745:9
  751. 386.96 s [gammaloop-workspace-clippy] |
  752. 386.96 s [gammaloop-workspace-clippy] 2745 | selection.default_channel_selection = vec!["named".into()];
  753. 386.96 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  754. 386.96 s [gammaloop-workspace-clippy] |
  755. 386.96 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["named".into()], ..Default::default() }` and removing relevant reassignments
  756. 386.96 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2744:9
  757. 386.96 s [gammaloop-workspace-clippy] |
  758. 386.96 s [gammaloop-workspace-clippy] 2744 | let mut selection = SamplingChannelSelection::default();
  759. 386.96 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  760. 386.96 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  761. 386.96 s [gammaloop-workspace-clippy]
  762. 386.96 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  763. 386.96 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2768:9
  764. 386.96 s [gammaloop-workspace-clippy] |
  765. 386.96 s [gammaloop-workspace-clippy] 2768 | selection.default_channel_selection = vec!["threshold".into()];
  766. 386.96 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  767. 386.96 s [gammaloop-workspace-clippy] |
  768. 386.96 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  769. 386.96 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2767:9
  770. 386.96 s [gammaloop-workspace-clippy] |
  771. 386.96 s [gammaloop-workspace-clippy] 2767 | let mut selection = SamplingChannelSelection::default();
  772. 386.96 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  773. 386.96 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  774. 386.96 s [gammaloop-workspace-clippy]
  775. 386.96 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  776. 386.96 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2820:9
  777. 386.96 s [gammaloop-workspace-clippy] |
  778. 386.96 s [gammaloop-workspace-clippy] 2820 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  779. 386.96 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  780. 386.96 s [gammaloop-workspace-clippy] |
  781. 386.96 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  782. 386.96 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2819:9
  783. 386.96 s [gammaloop-workspace-clippy] |
  784. 386.96 s [gammaloop-workspace-clippy] 2819 | let mut selection = SamplingChannelSelection::default();
  785. 386.96 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  786. 386.96 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  787. 386.96 s [gammaloop-workspace-clippy]
  788. 386.96 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  789. 386.96 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2837:9
  790. 386.96 s [gammaloop-workspace-clippy] |
  791. 386.96 s [gammaloop-workspace-clippy] 2837 | selection.default_channel_selection = vec!["auto:surfaces".into(), "auto:lmb".into()];
  792. 386.96 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  793. 386.96 s [gammaloop-workspace-clippy] |
  794. 386.96 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:surfaces".into(), "auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  795. 386.96 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2836:9
  796. 386.96 s [gammaloop-workspace-clippy] |
  797. 386.96 s [gammaloop-workspace-clippy] 2836 | let mut selection = SamplingChannelSelection::default();
  798. 386.96 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  799. 386.96 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  800. 386.96 s [gammaloop-workspace-clippy]
  801. 386.97 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  802. 386.97 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2847:9
  803. 386.97 s [gammaloop-workspace-clippy] |
  804. 386.97 s [gammaloop-workspace-clippy] 2847 | selection.default_channel_selection = vec!["auto:surfaces".into()];
  805. 386.97 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  806. 386.97 s [gammaloop-workspace-clippy] |
  807. 386.97 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:surfaces".into()], ..Default::default() }` and removing relevant reassignments
  808. 386.97 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2846:9
  809. 386.97 s [gammaloop-workspace-clippy] |
  810. 386.97 s [gammaloop-workspace-clippy] 2846 | let mut selection = SamplingChannelSelection::default();
  811. 386.97 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  812. 386.97 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  813. 386.97 s [gammaloop-workspace-clippy]
  814. 386.97 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  815. 386.97 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2868:13
  816. 386.97 s [gammaloop-workspace-clippy] |
  817. 386.97 s [gammaloop-workspace-clippy] 2868 | selection.default_channel_selection = vec![preset.into()];
  818. 386.97 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  819. 386.97 s [gammaloop-workspace-clippy] |
  820. 386.97 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec![preset.into()], ..Default::default() }` and removing relevant reassignments
  821. 386.97 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2867:13
  822. 386.97 s [gammaloop-workspace-clippy] |
  823. 386.97 s [gammaloop-workspace-clippy] 2867 | let mut selection = SamplingChannelSelection::default();
  824. 386.97 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  825. 386.97 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  826. 386.97 s [gammaloop-workspace-clippy]
  827. 386.97 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  828. 386.97 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2899:9
  829. 386.97 s [gammaloop-workspace-clippy] |
  830. 386.97 s [gammaloop-workspace-clippy] 2899 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  831. 386.97 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  832. 386.97 s [gammaloop-workspace-clippy] |
  833. 386.97 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  834. 386.97 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2898:9
  835. 386.97 s [gammaloop-workspace-clippy] |
  836. 386.97 s [gammaloop-workspace-clippy] 2898 | let mut selection = SamplingChannelSelection::default();
  837. 386.97 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  838. 386.97 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  839. 386.97 s [gammaloop-workspace-clippy]
  840. 386.97 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  841. 386.97 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2981:13
  842. 386.97 s [gammaloop-workspace-clippy] |
  843. 386.97 s [gammaloop-workspace-clippy] 2981 | selection.default_channel_selection = vec![name.to_owned()];
  844. 386.97 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  845. 386.97 s [gammaloop-workspace-clippy] |
  846. 386.97 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec![name.to_owned()], ..Default::default() }` and removing relevant reassignments
  847. 386.97 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2980:13
  848. 386.97 s [gammaloop-workspace-clippy] |
  849. 386.97 s [gammaloop-workspace-clippy] 2980 | let mut selection = SamplingChannelSelection::default();
  850. 386.97 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  851. 386.97 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  852. 386.97 s [gammaloop-workspace-clippy]
  853. 386.98 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  854. 386.98 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3015:9
  855. 386.98 s [gammaloop-workspace-clippy] |
  856. 386.98 s [gammaloop-workspace-clippy] 3015 | selection.default_channel_selection = vec!["threshold".into()];
  857. 386.98 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  858. 386.98 s [gammaloop-workspace-clippy] |
  859. 386.98 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  860. 386.98 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3014:9
  861. 386.98 s [gammaloop-workspace-clippy] |
  862. 386.98 s [gammaloop-workspace-clippy] 3014 | let mut selection = SamplingChannelSelection::default();
  863. 386.98 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  864. 386.98 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  865. 386.98 s [gammaloop-workspace-clippy]
  866. 386.98 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  867. 386.98 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3060:9
  868. 386.98 s [gammaloop-workspace-clippy] |
  869. 386.98 s [gammaloop-workspace-clippy] 3060 | selection.default_channel_selection = vec!["conditional".into()];
  870. 386.98 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  871. 386.98 s [gammaloop-workspace-clippy] |
  872. 386.98 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["conditional".into()], ..Default::default() }` and removing relevant reassignments
  873. 386.98 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3059:9
  874. 386.98 s [gammaloop-workspace-clippy] |
  875. 386.98 s [gammaloop-workspace-clippy] 3059 | let mut selection = SamplingChannelSelection::default();
  876. 386.98 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  877. 386.98 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  878. 386.98 s [gammaloop-workspace-clippy]
  879. 386.98 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  880. 386.98 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3122:9
  881. 386.98 s [gammaloop-workspace-clippy] |
  882. 386.98 s [gammaloop-workspace-clippy] 3122 | selection.default_channel_selection = vec!["h".into(), "z".into()];
  883. 386.98 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  884. 386.98 s [gammaloop-workspace-clippy] |
  885. 386.98 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["h".into(), "z".into()], ..Default::default() }` and removing relevant reassignments
  886. 386.98 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3121:9
  887. 386.98 s [gammaloop-workspace-clippy] |
  888. 386.98 s [gammaloop-workspace-clippy] 3121 | let mut selection = SamplingChannelSelection::default();
  889. 386.98 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  890. 386.98 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  891. 386.98 s [gammaloop-workspace-clippy]
  892. 386.99 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  893. 386.99 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3166:9
  894. 386.99 s [gammaloop-workspace-clippy] |
  895. 386.99 s [gammaloop-workspace-clippy] 3166 | selection.default_channel_selection = vec!["auto:lmb".into()];
  896. 386.99 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  897. 386.99 s [gammaloop-workspace-clippy] |
  898. 386.99 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  899. 386.99 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3165:9
  900. 386.99 s [gammaloop-workspace-clippy] |
  901. 386.99 s [gammaloop-workspace-clippy] 3165 | let mut selection = SamplingChannelSelection::default();
  902. 386.99 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  903. 386.99 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  904. 386.99 s [gammaloop-workspace-clippy]
  905. 386.99 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  906. 386.99 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3188:9
  907. 386.99 s [gammaloop-workspace-clippy] |
  908. 386.99 s [gammaloop-workspace-clippy] 3188 | selection.default_channel_selection = vec!["auto:lmb".into()];
  909. 386.99 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  910. 386.99 s [gammaloop-workspace-clippy] |
  911. 386.99 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  912. 386.99 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3187:9
  913. 386.99 s [gammaloop-workspace-clippy] |
  914. 386.99 s [gammaloop-workspace-clippy] 3187 | let mut selection = SamplingChannelSelection::default();
  915. 386.99 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  916. 386.99 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  917. 386.99 s [gammaloop-workspace-clippy]
  918. 386.99 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  919. 386.99 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3240:9
  920. 386.99 s [gammaloop-workspace-clippy] |
  921. 386.99 s [gammaloop-workspace-clippy] 3240 | selection.default_channel_selection = vec!["named".into()];
  922. 386.99 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  923. 386.99 s [gammaloop-workspace-clippy] |
  924. 386.99 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["named".into()], ..Default::default() }` and removing relevant reassignments
  925. 386.99 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3239:9
  926. 386.99 s [gammaloop-workspace-clippy] |
  927. 386.99 s [gammaloop-workspace-clippy] 3239 | let mut selection = SamplingChannelSelection::default();
  928. 386.99 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  929. 386.99 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  930. 386.99 s [gammaloop-workspace-clippy]
  931. 386.99 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  932. 386.99 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3289:9
  933. 386.99 s [gammaloop-workspace-clippy] |
  934. 386.99 s [gammaloop-workspace-clippy] 3289 | selection.default_channel_selection = vec!["threshold".into()];
  935. 386.99 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  936. 386.99 s [gammaloop-workspace-clippy] |
  937. 386.99 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  938. 386.99 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3288:9
  939. 386.99 s [gammaloop-workspace-clippy] |
  940. 386.99 s [gammaloop-workspace-clippy] 3288 | let mut selection = SamplingChannelSelection::default();
  941. 386.99 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  942. 386.99 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  943. 386.99 s [gammaloop-workspace-clippy]
  944. 386.99 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  945. 386.99 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3336:9
  946. 386.99 s [gammaloop-workspace-clippy] |
  947. 386.99 s [gammaloop-workspace-clippy] 3336 | selection.default_channel_selection = vec!["cut_channel".into()];
  948. 386.99 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  949. 386.99 s [gammaloop-workspace-clippy] |
  950. 386.99 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_channel".into()], ..Default::default() }` and removing relevant reassignments
  951. 386.99 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3335:9
  952. 386.99 s [gammaloop-workspace-clippy] |
  953. 387.00 s [gammaloop-workspace-clippy] 3335 | let mut selection = SamplingChannelSelection::default();
  954. 387.00 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  955. 387.00 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  956. 387.00 s [gammaloop-workspace-clippy]
  957. 387.00 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  958. 387.00 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3366:9
  959. 387.00 s [gammaloop-workspace-clippy] |
  960. 387.00 s [gammaloop-workspace-clippy] 3366 | selection.default_channel_selection = vec!["right_channel".into()];
  961. 387.00 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  962. 387.00 s [gammaloop-workspace-clippy] |
  963. 387.00 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["right_channel".into()], ..Default::default() }` and removing relevant reassignments
  964. 387.00 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3365:9
  965. 387.00 s [gammaloop-workspace-clippy] |
  966. 387.00 s [gammaloop-workspace-clippy] 3365 | let mut selection = SamplingChannelSelection::default();
  967. 387.00 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  968. 387.00 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  969. 387.00 s [gammaloop-workspace-clippy]
  970. 387.00 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  971. 387.00 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3393:9
  972. 387.00 s [gammaloop-workspace-clippy] |
  973. 387.00 s [gammaloop-workspace-clippy] 3393 | selection.default_channel_selection = vec!["cut_chart".into()];
  974. 387.00 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  975. 387.00 s [gammaloop-workspace-clippy] |
  976. 387.00 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_chart".into()], ..Default::default() }` and removing relevant reassignments
  977. 387.00 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3392:9
  978. 387.00 s [gammaloop-workspace-clippy] |
  979. 387.00 s [gammaloop-workspace-clippy] 3392 | let mut selection = SamplingChannelSelection::default();
  980. 387.00 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  981. 387.00 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  982. 387.00 s [gammaloop-workspace-clippy]
  983. 387.00 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  984. 387.00 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3419:9
  985. 387.00 s [gammaloop-workspace-clippy] |
  986. 387.00 s [gammaloop-workspace-clippy] 3419 | selection.default_channel_selection = vec!["cut_chart".into()];
  987. 387.00 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  988. 387.00 s [gammaloop-workspace-clippy] |
  989. 387.00 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_chart".into()], ..Default::default() }` and removing relevant reassignments
  990. 387.00 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3418:9
  991. 387.00 s [gammaloop-workspace-clippy] |
  992. 387.00 s [gammaloop-workspace-clippy] 3418 | let mut selection = SamplingChannelSelection::default();
  993. 387.00 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  994. 387.00 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  995. 387.00 s [gammaloop-workspace-clippy]
  996. 387.00 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  997. 387.00 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3496:9
  998. 387.00 s [gammaloop-workspace-clippy] |
  999. 387.00 s [gammaloop-workspace-clippy] 3496 | selection.default_channel_selection = vec!["left_target".into()];
  1000. 387.00 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1001. 387.00 s [gammaloop-workspace-clippy] |
  1002. 387.00 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["left_target".into()], ..Default::default() }` and removing relevant reassignments
  1003. 387.00 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3495:9
  1004. 387.00 s [gammaloop-workspace-clippy] |
  1005. 387.00 s [gammaloop-workspace-clippy] 3495 | let mut selection = SamplingChannelSelection::default();
  1006. 387.00 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1007. 387.00 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1008. 387.00 s [gammaloop-workspace-clippy]
  1009. 387.00 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1010. 387.00 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3540:9
  1011. 387.00 s [gammaloop-workspace-clippy] |
  1012. 387.00 s [gammaloop-workspace-clippy] 3540 | selection.default_channel_selection = vec!["threshold".into()];
  1013. 387.00 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1014. 387.00 s [gammaloop-workspace-clippy] |
  1015. 387.00 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  1016. 387.00 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3539:9
  1017. 387.00 s [gammaloop-workspace-clippy] |
  1018. 387.00 s [gammaloop-workspace-clippy] 3539 | let mut selection = SamplingChannelSelection::default();
  1019. 387.00 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1020. 387.00 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1021. 387.00 s [gammaloop-workspace-clippy]
  1022. 387.01 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1023. 387.01 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3564:9
  1024. 387.01 s [gammaloop-workspace-clippy] |
  1025. 387.01 s [gammaloop-workspace-clippy] 3564 | selection.default_channel_selection = vec!["joint".into()];
  1026. 387.01 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1027. 387.01 s [gammaloop-workspace-clippy] |
  1028. 387.01 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  1029. 387.01 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3563:9
  1030. 387.01 s [gammaloop-workspace-clippy] |
  1031. 387.01 s [gammaloop-workspace-clippy] 3563 | let mut selection = SamplingChannelSelection::default();
  1032. 387.01 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1033. 387.01 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1034. 387.01 s [gammaloop-workspace-clippy]
  1035. 387.01 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1036. 387.01 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3597:9
  1037. 387.01 s [gammaloop-workspace-clippy] |
  1038. 387.01 s [gammaloop-workspace-clippy] 3597 | selection.default_channel_selection = vec!["joint".into()];
  1039. 387.01 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1040. 387.01 s [gammaloop-workspace-clippy] |
  1041. 387.01 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  1042. 387.01 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3596:9
  1043. 387.01 s [gammaloop-workspace-clippy] |
  1044. 387.01 s [gammaloop-workspace-clippy] 3596 | let mut selection = SamplingChannelSelection::default();
  1045. 387.01 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1046. 387.01 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1047. 387.01 s [gammaloop-workspace-clippy]
  1048. 387.01 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1049. 387.01 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3654:9
  1050. 387.01 s [gammaloop-workspace-clippy] |
  1051. 387.01 s [gammaloop-workspace-clippy] 3654 | selection.default_channel_selection = vec!["joint".into()];
  1052. 387.01 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1053. 387.01 s [gammaloop-workspace-clippy] |
  1054. 387.01 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  1055. 387.01 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3653:9
  1056. 387.01 s [gammaloop-workspace-clippy] |
  1057. 387.01 s [gammaloop-workspace-clippy] 3653 | let mut selection = SamplingChannelSelection::default();
  1058. 387.01 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1059. 387.01 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1060. 387.01 s [gammaloop-workspace-clippy]
  1061. 387.02 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1062. 387.02 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3758:9
  1063. 387.02 s [gammaloop-workspace-clippy] |
  1064. 387.02 s [gammaloop-workspace-clippy] 3758 | selection.default_channel_selection = vec!["auto:lmb".into()];
  1065. 387.02 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1066. 387.02 s [gammaloop-workspace-clippy] |
  1067. 387.02 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  1068. 387.02 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3757:9
  1069. 387.02 s [gammaloop-workspace-clippy] |
  1070. 387.02 s [gammaloop-workspace-clippy] 3757 | let mut selection = SamplingChannelSelection::default();
  1071. 387.02 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1072. 387.02 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1073. 387.02 s [gammaloop-workspace-clippy]
  1074. 387.02 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1075. 387.02 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3806:9
  1076. 387.02 s [gammaloop-workspace-clippy] |
  1077. 387.02 s [gammaloop-workspace-clippy] 3806 | selection.default_channel_selection = vec!["auto:lmb".into()];
  1078. 387.02 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1079. 387.02 s [gammaloop-workspace-clippy] |
  1080. 387.02 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  1081. 387.02 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3805:9
  1082. 387.02 s [gammaloop-workspace-clippy] |
  1083. 387.02 s [gammaloop-workspace-clippy] 3805 | let mut selection = SamplingChannelSelection::default();
  1084. 387.02 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1085. 387.02 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1086. 387.02 s [gammaloop-workspace-clippy]
  1087. 387.02 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1088. 387.02 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3838:9
  1089. 387.02 s [gammaloop-workspace-clippy] |
  1090. 387.02 s [gammaloop-workspace-clippy] 3838 | selection.default_channel_selection = vec!["auto:lmb".into()];
  1091. 387.02 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1092. 387.02 s [gammaloop-workspace-clippy] |
  1093. 387.02 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  1094. 387.02 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3837:9
  1095. 387.02 s [gammaloop-workspace-clippy] |
  1096. 387.02 s [gammaloop-workspace-clippy] 3837 | let mut selection = SamplingChannelSelection::default();
  1097. 387.02 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1098. 387.02 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1099. 387.02 s [gammaloop-workspace-clippy]
  1100. 387.19 s [gammaloop-workspace-clippy] error: using `clone` on type `Complex<F<f64>>` which implements the `Copy` trait
  1101. 387.19 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:160:32
  1102. 387.19 s [gammaloop-workspace-clippy] |
  1103. 387.19 s [gammaloop-workspace-clippy] 160 | value: value.values[0].clone(),
  1104. 387.19 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `value.values[0]`
  1105. 387.19 s [gammaloop-workspace-clippy] |
  1106. 387.19 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  1107. 387.19 s [gammaloop-workspace-clippy]
  1108. 387.63 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1109. 387.63 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:5610:9
  1110. 387.63 s [gammaloop-workspace-clippy] |
  1111. 387.63 s [gammaloop-workspace-clippy] 5610 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  1112. 387.63 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1113. 387.63 s [gammaloop-workspace-clippy] |
  1114. 387.63 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  1115. 387.63 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:5609:9
  1116. 387.63 s [gammaloop-workspace-clippy] |
  1117. 387.63 s [gammaloop-workspace-clippy] 5609 | let mut selection = SamplingChannelSelection::default();
  1118. 387.63 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1119. 387.63 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1120. 387.63 s [gammaloop-workspace-clippy]
  1121. 387.63 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1122. 387.63 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:5613:9
  1123. 387.63 s [gammaloop-workspace-clippy] |
  1124. 387.64 s [gammaloop-workspace-clippy] 5613 | parameterization_settings.sampling_channels = selection;
  1125. 387.64 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1126. 387.64 s [gammaloop-workspace-clippy] |
  1127. 387.64 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::ParameterizationSettings { sampling_channels: selection, ..Default::default() }` and removing relevant reassignments
  1128. 387.64 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:5612:9
  1129. 387.64 s [gammaloop-workspace-clippy] |
  1130. 387.64 s [gammaloop-workspace-clippy] 5612 | let mut parameterization_settings = ParameterizationSettings::default();
  1131. 387.64 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1132. 387.64 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1133. 387.64 s [gammaloop-workspace-clippy]
  1134. 387.64 s [gammaloop-workspace-clippy] error: large size difference between variants
  1135. 387.64 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/mod.rs:54:1
  1136. 387.64 s [gammaloop-workspace-clippy] |
  1137. 387.64 s [gammaloop-workspace-clippy] 54 | / pub enum Integrand {
  1138. 387.64 s [gammaloop-workspace-clippy] 55 | | ProcessIntegrand(Box<ProcessIntegrand>),
  1139. 387.64 s [gammaloop-workspace-clippy] | | --------------------------------------- the second-largest variant contains at least 8 bytes
  1140. 387.64 s [gammaloop-workspace-clippy] 56 | | #[cfg(test)]
  1141. 387.64 s [gammaloop-workspace-clippy] 57 | | TestProbe(TestProbeIntegrand),
  1142. 387.64 s [gammaloop-workspace-clippy] | | ----------------------------- the largest variant contains at least 888 bytes
  1143. 387.64 s [gammaloop-workspace-clippy] 58 | | }
  1144. 387.64 s [gammaloop-workspace-clippy] | |_^ the entire enum is at least 888 bytes
  1145. 387.64 s [gammaloop-workspace-clippy] |
  1146. 387.64 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#large_enum_variant
  1147. 387.64 s [gammaloop-workspace-clippy] = note: `-D clippy::large-enum-variant` implied by `-D warnings`
  1148. 387.64 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::large_enum_variant)]`
  1149. 387.64 s [gammaloop-workspace-clippy] help: consider boxing the large fields or introducing indirection in some other way to reduce the total size of the enum
  1150. 387.64 s [gammaloop-workspace-clippy] |
  1151. 387.64 s [gammaloop-workspace-clippy] 57 - TestProbe(TestProbeIntegrand),
  1152. 387.64 s [gammaloop-workspace-clippy] 57 + TestProbe(Box<TestProbeIntegrand>),
  1153. 387.64 s [gammaloop-workspace-clippy] |
  1154. 387.64 s [gammaloop-workspace-clippy]
  1155. 396.10 s [gammaloop-workspace-clippy] error: could not compile `gammalooprs` (lib test) due to 49 previous errors
  1156. 397.03 s Progress: 0 of 1 built (1 failed)
  1157. 397.03 s Failed to build gammaloop-workspace-clippy after 6m33s
  1158. 397.05 s Cannot build '/nix/store/d8iasrfw09rzwhag7rn1lmbxvmrz8ks5-gammaloop-workspace-clippy-0.1.0.drv'.
  1159. 397.05 s Reason: builder failed with exit code 101.
  1160. 397.05 s Output paths:
  1161. 397.05 s /nix/store/dh3hlkbvwn0nmd8nr1b258g9lf7j8f21-gammaloop-workspace-clippy-0.1.0
  1162. 397.05 s Last 1151 log lines:
  1163. 397.05 s > Running phase: unpackPhase
  1164. 397.05 s > unpacking source archive /nix/store/niwlxjcsks4ybgn24z35xizwz35nka4d-source
  1165. 397.05 s > source root is source
  1166. 397.05 s > Running phase: patchPhase
  1167. 397.05 s > Executing configureCargoCommonVars
  1168. 397.05 s > decompressing cargo artifacts from /nix/store/50vpxlcgfxf2d57i27v3d10zjwxxbm2r-gammaloop-workspace-deps-deps-0.1.0/target.tar.zst to target
  1169. 397.05 s > Running phase: updateAutotoolsGnuConfigScriptsPhase
  1170. 397.05 s > Running phase: configurePhase
  1171. 397.05 s > will append /build/source/.cargo-home/config.toml with contents of /nix/store/5drf77x6km4ky7gwlrzdx9bbd6fz09g3-vendor-cargo-deps/config.toml
  1172. 397.05 s > default configurePhase, nothing to do
  1173. 397.05 s > Running phase: buildPhase
  1174. 397.05 s > +++ command cargo --version
  1175. 397.05 s > cargo 1.97.0 (c980f4866 2026-06-30)
  1176. 397.05 s > +++ command cargo clippy --profile ci-optim --locked --workspace --features gammaloop-tracing-filter/clap,gammaloop-tracing-filter/symbolica,idenso/bincode,idenso/reference-cases,linnet/bincode,linnet/drawing,linnet/rkyv,linnet/serde,linnet/symbolica,spenso-macros/shadowing,spenso/shadowing,symbolica/tracing_max_level_info,three-dimensional-reps/display,three-dimensional-reps/eval,three-dimensional-reps/serde --all-targets --no-deps -- --deny warnings
  1177. 397.05 s > Checking cfg-if v1.0.4
  1178. 397.05 s > Checking memchr v2.8.0
  1179. 397.05 s > Checking once_cell v1.21.4
  1180. 397.05 s > Checking either v1.15.0
  1181. 397.05 s > Checking serde_core v1.0.228
  1182. 397.05 s > Checking libc v0.2.186
  1183. 397.05 s > Checking libm v0.2.16
  1184. 397.05 s > Checking itoa v1.0.18
  1185. 397.05 s > Checking log v0.4.29
  1186. 397.05 s > Checking regex-syntax v0.8.10
  1187. 397.05 s > Checking zerocopy v0.8.48
  1188. 397.05 s > Checking crossbeam-utils v0.8.21
  1189. 397.05 s > Checking equivalent v1.0.2
  1190. 397.05 s > Checking zmij v1.0.21
  1191. 397.05 s > Checking bytemuck v1.25.0
  1192. 397.05 s > Checking lazy_static v1.5.0
  1193. 397.05 s > Compiling target-lexicon v0.13.5
  1194. 397.05 s > Checking arrayvec v0.7.6
  1195. 397.05 s > Checking powerfmt v0.2.0
  1196. 397.05 s > Checking time-core v0.1.8
  1197. 397.05 s > Checking pin-project-lite v0.2.17
  1198. 397.05 s > Checking itertools v0.14.0
  1199. 397.05 s > Checking num-conv v0.2.1
  1200. 397.05 s > Checking num_threads v0.1.7
  1201. 397.05 s > Checking safe_arch v0.7.4
  1202. 397.05 s > Checking deranged v0.5.8
  1203. 397.05 s > Checking tracing-core v0.1.36
  1204. 397.05 s > Checking foldhash v0.2.0
  1205. 397.05 s > Checking allocator-api2 v0.2.21
  1206. 397.05 s > Checking const-random v0.1.18
  1207. 397.05 s > Checking unty v0.0.4
  1208. 397.05 s > Checking winnow v1.0.2
  1209. 397.05 s > Checking static_assertions v1.1.0
  1210. 397.05 s > Checking nu-ansi-term v0.50.3
  1211. 397.05 s > Checking safe_arch v1.0.0
  1212. 397.05 s > Checking aho-corasick v1.1.4
  1213. 397.05 s > Checking wide v0.7.33
  1214. 397.05 s > Checking crossbeam-epoch v0.9.18
  1215. 397.05 s > Checking hashbrown v0.16.1
  1216. 397.05 s > Checking tracing v0.1.44
  1217. 397.05 s > Checking tracing-log v0.2.0
  1218. 397.05 s > Checking sharded-slab v0.1.7
  1219. 397.05 s > Checking thread_local v1.1.9
  1220. 397.05 s > Checking crossbeam-deque v0.8.6
  1221. 397.05 s > Checking indenter v0.3.4
  1222. 397.05 s > Checking toml_writer v1.1.1+spec-1.1.0
  1223. 397.05 s > Checking az v1.3.0
  1224. 397.05 s > Checking rayon-core v1.13.0
  1225. 397.05 s > Checking wide v1.3.0
  1226. 397.05 s > Compiling phf_shared v0.11.3
  1227. 397.05 s > Checking num-traits v0.2.19
  1228. 397.05 s > Checking anyhow v1.0.102
  1229. 397.05 s > Checking alloc-no-stdlib v2.0.4
  1230. 397.05 s > Checking utf8parse v0.2.2
  1231. 397.05 s > Checking dyn-clone v1.0.20
  1232. 397.05 s > Checking rawpointer v0.2.1
  1233. 397.05 s > Checking anstyle-parse v1.0.0
  1234. 397.05 s > Checking alloc-stdlib v0.2.2
  1235. 397.05 s > Checking rayon v1.12.0
  1236. 397.05 s > Checking colorchoice v1.0.5
  1237. 397.05 s > Checking matrixmultiply v0.3.10
  1238. 397.05 s > Checking anstyle-query v1.1.5
  1239. 397.05 s > Checking anstyle v1.0.14
  1240. 397.05 s > Checking is_terminal_polyfill v1.70.2
  1241. 397.05 s > Checking colored v3.1.1
  1242. 397.05 s > Checking getrandom v0.3.4
  1243. 397.05 s > Checking time v0.3.47
  1244. 397.05 s > Checking toml_parser v1.1.2+spec-1.1.0
  1245. 397.05 s > Checking gmp-mpfr-sys v1.7.1
  1246. 397.05 s > Checking anstream v1.0.0
  1247. 397.05 s > Checking rand_core v0.9.5
  1248. 397.05 s > Compiling phf_generator v0.11.3
  1249. 397.05 s > Checking eyre v0.6.12
  1250. 397.05 s > Checking approx v0.5.1
  1251. 397.05 s > Checking num-integer v0.1.46
  1252. 397.05 s > Checking unicode-width v0.2.2
  1253. 397.05 s > Checking bitflags v1.3.2
  1254. 397.05 s > Compiling phf_codegen v0.11.3
  1255. 397.05 s > Checking regex-automata v0.4.14
  1256. 397.05 s > Checking hugepage-rs v0.1.1
  1257. 397.05 s > Checking wasmtime-jit-icache-coherence v34.0.2
  1258. 397.05 s > Checking region v3.0.2
  1259. 397.05 s > Compiling pyo3-build-config v0.28.3
  1260. 397.05 s > Checking brotli-decompressor v5.0.0
  1261. 397.05 s > Checking inventory v0.3.24
  1262. 397.05 s > Checking spec_math v0.1.6
  1263. 397.05 s > Checking thiserror v2.0.18
  1264. 397.05 s > Compiling getopts v0.2.24
  1265. 397.05 s > Checking libloading v0.9.0
  1266. 397.05 s > Checking serde v1.0.228
  1267. 397.05 s > Checking serde_json v1.0.149
  1268. 397.05 s > Checking bitflags v2.11.1
  1269. 397.05 s > Checking serde_spanned v1.1.1
  1270. 397.05 s > Checking toml_datetime v1.1.1+spec-1.1.0
  1271. 397.05 s > Checking self_cell v1.2.2
  1272. 397.05 s > Checking append-only-vec v0.1.8
  1273. 397.05 s > Checking bytes v1.11.1
  1274. 397.05 s > Checking tinyjson v2.5.1
  1275. 397.05 s > Checking byteorder v1.5.0
  1276. 397.05 s > Compiling unic-char-range v0.9.0
  1277. 397.05 s > Checking toml v1.1.2+spec-1.1.0
  1278. 397.05 s > Compiling unicode_names2_generator v1.3.0
  1279. 397.05 s > Compiling unic-common v0.9.0
  1280. 397.05 s > Checking linux-raw-sys v0.12.1
  1281. 397.05 s > Compiling unic-ucd-version v0.9.0
  1282. 397.05 s > Compiling unic-char-property v0.9.0
  1283. 397.05 s > Compiling is-macro v0.3.7
  1284. 397.05 s > Checking smallvec v1.15.1
  1285. 397.05 s > Checking num-complex v0.4.6
  1286. 397.05 s > Checking tracing-serde v0.2.0
  1287. 397.05 s > Checking bincode v2.0.1
  1288. 397.05 s > Checking brotli v8.0.2
  1289. 397.05 s > Checking smartstring v1.0.1
  1290. 397.05 s > Checking rustix v1.1.4
  1291. 397.05 s > Checking simba v0.9.1
  1292. 397.05 s > Compiling rustpython-parser-vendored v0.4.0
  1293. 397.05 s > Checking iana-time-zone v0.1.65
  1294. 397.05 s > Compiling rustpython-parser v0.4.0
  1295. 397.05 s > Compiling phf v0.11.3
  1296. 397.05 s > Checking rustc-hash v2.1.2
  1297. 397.05 s > Checking ndarray v0.17.2
  1298. 397.05 s > Compiling unic-emoji-char v0.9.0
  1299. 397.05 s > Compiling unic-ucd-ident v0.9.0
  1300. 397.05 s > Checking chrono v0.4.44
  1301. 397.05 s > Compiling rustc-hash v1.1.0
  1302. 397.05 s > Compiling lalrpop-util v0.20.2
  1303. 397.05 s > Checking rug v1.30.0
  1304. 397.05 s > Checking unicode-segmentation v1.13.2
  1305. 397.05 s > Checking ppv-lite86 v0.2.21
  1306. 397.05 s > Checking ahash v0.8.12
  1307. 397.05 s > Compiling symbolica v2.2.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  1308. 397.05 s > Checking typenum v1.20.0
  1309. 397.05 s > Checking getrandom v0.2.17
  1310. 397.05 s > Checking scopeguard v1.2.0
  1311. 397.05 s > Checking rand_chacha v0.9.0
  1312. 397.05 s > Checking parking_lot_core v0.9.12
  1313. 397.05 s > Checking unicode-ident v1.0.24
  1314. 397.05 s > Checking lock_api v0.4.14
  1315. 397.05 s > Checking hashbrown v0.17.0
  1316. 397.05 s > Checking rand v0.9.4
  1317. 397.05 s > Checking errno v0.3.14
  1318. 397.05 s > Checking clap_lex v1.1.0
  1319. 397.05 s > Checking terminal_size v0.4.4
  1320. 397.05 s > Checking strsim v0.11.1
  1321. 397.05 s > Checking unicase v2.9.0
  1322. 397.05 s > Checking matchers v0.2.0
  1323. 397.05 s > Checking regex v1.12.3
  1324. 397.05 s > Checking parking_lot v0.12.5
  1325. 397.05 s > Checking signal-hook-registry v1.4.8
  1326. 397.05 s > Checking vte v0.14.1
  1327. 397.05 s > Checking generic-array v0.14.7
  1328. 397.05 s > Checking same-file v1.0.6
  1329. 397.05 s > Checking walkdir v2.5.0
  1330. 397.05 s > Checking block-buffer v0.10.4
  1331. 397.05 s > Checking clap_builder v4.6.0
  1332. 397.05 s > Checking signal-hook v0.3.18
  1333. 397.05 s > Checking tracing-subscriber v0.3.23
  1334. 397.05 s > Checking crypto-common v0.1.7
  1335. 397.05 s > Checking half v2.7.1
  1336. 397.05 s > Checking mio v1.2.0
  1337. 397.05 s > Checking ciborium-io v0.2.2
  1338. 397.05 s > Checking minimal-lexical v0.2.1
  1339. 397.05 s > Checking indexmap v2.14.0
  1340. 397.05 s > Checking digest v0.10.7
  1341. 397.05 s > Checking symjit v2.21.0
  1342. 397.05 s > Checking ciborium-ll v0.2.2
  1343. 397.05 s > Checking derive_more v2.1.1
  1344. 397.05 s > Checking nom v7.1.3
  1345. 397.05 s > Checking num-bigint v0.4.6
  1346. 397.05 s > Compiling unicode_names2 v1.3.0
  1347. 397.05 s > Checking console v0.16.3
  1348. 397.05 s > Checking signal-hook-mio v0.2.5
  1349. 397.05 s > Checking bstr v1.12.1
  1350. 397.05 s > Checking linux-raw-sys v0.4.15
  1351. 397.05 s > Checking cpufeatures v0.2.17
  1352. 397.05 s > Checking winnow v0.7.15
  1353. 397.05 s > Checking xprec v0.2.2
  1354. 397.05 s > Checking globset v0.4.18
  1355. 397.05 s > Checking sha2 v0.10.9
  1356. 397.05 s > Checking ciborium v0.2.2
  1357. 397.05 s > Checking getrandom v0.4.2
  1358. 397.05 s > Checking rand_core v0.6.4
  1359. 397.05 s > Checking rustix v0.38.44
  1360. 397.05 s > Checking plotters-backend v0.3.7
  1361. 397.05 s > Checking fnv v1.0.7
  1362. 397.05 s > Checking fastrand v2.4.1
  1363. 397.05 s > Checking clap v4.6.1
  1364. 397.05 s > Checking rust-embed-utils v8.11.0
  1365. 397.05 s > Checking toml_datetime v0.6.11
  1366. 397.05 s > Checking serde_spanned v0.6.9
  1367. 397.05 s > Checking itertools v0.10.5
  1368. 397.05 s > Checking cast v0.3.0
  1369. 397.05 s > Checking tap v1.0.1
  1370. 397.05 s > Checking plotters-svg v0.3.7
  1371. 397.05 s > Checking toml_write v0.1.2
  1372. 397.05 s > Checking tempfile v3.27.0
  1373. 397.05 s > Checking wyz v0.5.1
  1374. 397.05 s > Checking rand_chacha v0.3.1
  1375. 397.05 s > Checking plotters v0.3.7
  1376. 397.05 s > Checking radium v0.7.0
  1377. 397.05 s > Checking typeid v1.0.3
  1378. 397.05 s > Checking ansitok v0.3.0
  1379. 397.05 s > Checking similar v2.7.0
  1380. 397.05 s > Checking tinytemplate v1.2.1
  1381. 397.05 s > Checking is-terminal v0.4.17
  1382. 397.05 s > Checking oorandom v11.1.5
  1383. 397.05 s > Checking funty v2.0.0
  1384. 397.05 s > Checking anes v0.1.6
  1385. 397.05 s > Checking bytecount v0.6.9
  1386. 397.05 s > Checking crossterm v0.28.1
  1387. 397.05 s > Checking rand v0.8.6
  1388. 397.05 s > Checking ron v0.12.1
  1389. 397.05 s > Checking toml_edit v0.25.11+spec-1.1.0
  1390. 397.05 s > Compiling pyo3-macros-backend v0.28.3
  1391. 397.05 s > Compiling pyo3-ffi v0.28.3
  1392. 397.05 s > Compiling pyo3 v0.28.3
  1393. 397.05 s > Compiling numpy v0.28.0
  1394. 397.05 s > Checking criterion-plot v0.5.0
  1395. 397.05 s > Checking toml_edit v0.22.27
  1396. 397.05 s > Checking ansi-str v0.9.0
  1397. 397.05 s > Checking bitvec v1.0.1
  1398. 397.05 s > Checking testing_table v0.3.0
  1399. 397.05 s > Checking uncased v0.9.10
  1400. 397.05 s > Checking env_filter v1.0.1
  1401. 397.05 s > Checking jiff v0.2.24
  1402. 397.05 s > Checking criterion v0.5.1
  1403. 397.05 s > Checking ptr_meta v0.1.4
  1404. 397.05 s > Checking simdutf8 v0.1.5
  1405. 397.05 s > Checking papergrid v0.17.0
  1406. 397.05 s > Checking ucd-trie v0.1.7
  1407. 397.05 s > Checking ahash v0.7.8
  1408. 397.05 s > Checking approx v0.4.0
  1409. 397.05 s > Checking bytecheck v0.6.12
  1410. 397.05 s > Checking pest v2.8.6
  1411. 397.05 s > Checking seahash v4.1.0
  1412. 397.05 s > Checking insta v1.47.2
  1413. 397.05 s > Checking hashbrown v0.12.3
  1414. 397.05 s > Checking cgmath v0.18.0
  1415. 397.05 s > Checking num-rational v0.4.2
  1416. 397.05 s > Checking num-iter v0.1.45
  1417. 397.05 s > Checking rend v0.4.2
  1418. 397.05 s > Checking ref-ops v0.2.5
  1419. 397.05 s > Checking num v0.4.3
  1420. 397.05 s > Checking rand_xoshiro v0.6.0
  1421. 397.05 s > Checking features v0.10.0
  1422. 397.05 s > Checking constcat v0.5.1
  1423. 397.05 s > Checking gat-lending-iterator v0.1.8
  1424. 397.05 s > Checking colored v2.2.0
  1425. 397.05 s > Checking arrayref v0.3.9
  1426. 397.05 s > Checking constant_time_eq v0.4.2
  1427. 397.05 s > Compiling rustpython-parser-core v0.4.0
  1428. 397.05 s > Checking cpufeatures v0.3.0
  1429. 397.05 s > Checking base64 v0.22.1
  1430. 397.05 s > Compiling rustpython-ast v0.4.0
  1431. 397.05 s > Checking tabled v0.20.0
  1432. 397.05 s > Checking blake3 v1.8.5
  1433. 397.05 s > Checking siphasher v1.0.2
  1434. 397.05 s > Checking dot-parser v0.5.1
  1435. 397.05 s > Checking joinery v2.1.0
  1436. 397.05 s > Checking subprocess v0.2.15
  1437. 397.05 s > Checking phf_shared v0.13.1
  1438. 397.05 s > Checking titlecase v2.2.1
  1439. 397.05 s > Checking toml v0.8.23
  1440. 397.05 s > Checking rust_lisp v0.18.0
  1441. 397.05 s > Compiling vakint v0.1.2 (/build/source/crates/vakint)
  1442. 397.05 s > Checking phf v0.13.1
  1443. 397.05 s > Checking version-compare v0.2.1
  1444. 397.05 s > Checking xpct v0.5.1
  1445. 397.05 s > Checking ryu v1.0.23
  1446. 397.05 s > Checking castaway v0.2.4
  1447. 397.05 s > Checking toml_datetime v0.7.5+spec-1.1.0
  1448. 397.05 s > Checking strum v0.27.2
  1449. 397.05 s > Checking unicode-truncate v2.0.1
  1450. 397.05 s > Checking kasuari v0.4.12
  1451. 397.05 s > Checking compact_str v0.9.0
  1452. 397.05 s > Checking lru v0.16.4
  1453. 397.05 s > Checking figment v0.10.19
  1454. 397.05 s > Checking toml v0.9.12+spec-1.1.0
  1455. 397.05 s > Checking vte v0.15.0
  1456. 397.05 s > Checking portable-atomic v1.13.1
  1457. 397.05 s > Checking string-template-plus v0.4.3
  1458. 397.05 s > Checking vt100 v0.16.2
  1459. 397.05 s > Checking unit-prefix v0.5.2
  1460. 397.05 s > Checking rand_distr v0.4.3
  1461. 397.05 s > Checking simba v0.6.0
  1462. 397.05 s > Checking line-clipping v0.3.7
  1463. 397.05 s > Checking gimli v0.32.3
  1464. 397.05 s > Compiling three-dimensional-reps v0.1.0 (/build/source/crates/three-dimensional-reps)
  1465. 397.05 s > Checking adler2 v2.0.1
  1466. 397.05 s > Checking miniz_oxide v0.8.9
  1467. 397.05 s > Checking ratatui-core v0.1.0
  1468. 397.05 s > Checking thiserror v1.0.69
  1469. 397.05 s > Checking derive_builder v0.11.2
  1470. 397.05 s > Checking crossterm v0.29.0
  1471. 397.05 s > Checking owo-colors v4.3.0
  1472. 397.05 s > Checking object v0.37.3
  1473. 397.05 s > Checking tracing-error v0.2.1
  1474. 397.05 s > Checking indicatif v0.18.4
  1475. 397.05 s > Checking typed-index-collections v3.5.0
  1476. 397.05 s > Checking serde-big-array v0.5.1
  1477. 397.05 s > Checking amd v0.2.2
  1478. 397.05 s > Checking itertools v0.11.0
  1479. 397.05 s > Compiling gammaloop-tracing-filter-macros v0.1.0 (/build/source/crates/gammaloop-tracing-filter-macros)
  1480. 397.05 s > Checking rustc-demangle v0.1.27
  1481. 397.05 s > Checking option-ext v0.2.0
  1482. 397.05 s > Checking env_logger v0.11.10
  1483. 397.05 s > Checking dirs-sys v0.5.0
  1484. 397.05 s > Checking ref-cast v1.0.25
  1485. 397.05 s > Checking nix v0.31.2
  1486. 397.05 s > Checking color-spantrace v0.3.0
  1487. 397.05 s > Checking integer-sqrt v0.1.5
  1488. 397.05 s > Checking brotli-decompressor v4.0.3
  1489. 397.05 s > Checking crossbeam-channel v0.5.15
  1490. 397.05 s > Checking itertools v0.12.1
  1491. 397.05 s > Checking rkyv v0.7.46
  1492. 397.05 s > Checking unsafe-libyaml v0.2.11
  1493. 397.05 s > Compiling gammalooprs v0.3.4 (/build/source/crates/gammalooprs)
  1494. 397.05 s > Checking ratatui-widgets v0.3.0
  1495. 397.05 s > Checking ratatui-crossterm v0.1.0
  1496. 397.05 s > Checking symlink v0.1.0
  1497. 397.05 s > Checking tracing-appender v0.2.5
  1498. 397.05 s > Checking include_dir v0.7.4
  1499. 397.05 s > Checking ctrlc v3.5.2
  1500. 397.05 s > Checking pathfinding v4.15.0
  1501. 397.05 s > Checking dirs v6.0.0
  1502. 397.05 s > Checking clarabel v0.11.1
  1503. 397.05 s > Checking schemars v1.2.1
  1504. 397.05 s > Checking brotli v7.0.0
  1505. 397.05 s > Checking slotmap v1.1.1
  1506. 397.05 s > Checking serde_yaml v0.9.34+deprecated
  1507. 397.05 s > Checking tracing-indicatif v0.3.14
  1508. 397.05 s > Checking json5 v0.4.1
  1509. 397.05 s > Checking ratatui-macros v0.7.0
  1510. 397.05 s > Checking vectorize v0.2.0
  1511. 397.05 s > Checking ratatui v0.30.0
  1512. 397.05 s > Checking ringbuffer v0.16.0
  1513. 397.05 s > Checking base62 v2.2.4
  1514. 397.05 s > Checking rust-embed v8.11.0
  1515. 397.05 s > Checking clap_complete v4.6.3
  1516. 397.05 s > Checking strip-ansi-escapes v0.2.1
  1517. 397.05 s > Checking fd-lock v4.0.4
  1518. 397.05 s > Compiling gammaloop-api v0.1.0 (/build/source/crates/gammaloop-api)
  1519. 397.05 s > Checking itertools v0.13.0
  1520. 397.05 s > Checking strum v0.26.3
  1521. 397.05 s > Compiling numerica v2.2.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  1522. 397.05 s > Checking addr2line v0.25.1
  1523. 397.05 s > Checking clap_complete_nushell v4.6.0
  1524. 397.05 s > Checking sysinfo v0.33.1
  1525. 397.05 s > Checking shlex v1.3.0
  1526. 397.05 s > Checking futures-task v0.3.32
  1527. 397.05 s > Checking futures-core v0.3.32
  1528. 397.05 s > Checking slab v0.4.12
  1529. 397.05 s > Checking sdd v3.0.10
  1530. 397.05 s > Compiling gammaloop-integration-tests v0.1.0 (/build/source/tests)
  1531. 397.05 s > Compiling test-log-core v0.2.20
  1532. 397.05 s > Checking futures-util v0.3.32
  1533. 397.05 s > Compiling rustc_version v0.4.1
  1534. 397.05 s > Checking scc v2.4.0
  1535. 397.05 s > Checking which v8.0.2
  1536. 397.05 s > Checking nalgebra v0.29.0
  1537. 397.05 s > Checking bincode v1.3.3
  1538. 397.05 s > Compiling gungraun-runner v0.18.2
  1539. 397.05 s > Checking backtrace v0.3.76
  1540. 397.05 s > Compiling gungraun-macros v0.8.0
  1541. 397.05 s > Checking proc-macro2 v1.0.106
  1542. 397.05 s > Checking color-eyre v0.6.5
  1543. 397.05 s > Checking reedline v0.42.0
  1544. 397.05 s > Checking maplit v1.0.2
  1545. 397.05 s > Checking base64 v0.21.7
  1546. 397.05 s > Compiling iai-callgrind-runner v0.14.2
  1547. 397.05 s > Checking quote v1.0.45
  1548. 397.05 s > Checking kurbo v0.13.0
  1549. 397.05 s > Checking wait-timeout v0.2.1
  1550. 397.05 s > Checking ron v0.8.1
  1551. 397.05 s > Checking quick-error v1.2.3
  1552. 397.05 s > Checking futures-executor v0.3.32
  1553. 397.05 s > Compiling iai-callgrind v0.14.2
  1554. 397.05 s > Checking bit-vec v0.8.0
  1555. 397.05 s > Checking serial_test v3.4.0
  1556. 397.05 s > Checking bit-set v0.8.0
  1557. 397.05 s > Checking rusty-fork v0.3.1
  1558. 397.05 s > Checking syn v2.0.117
  1559. 397.05 s > Compiling iai-callgrind-macros v0.5.1
  1560. 397.05 s > Checking rand_xorshift v0.4.0
  1561. 397.05 s > Checking console v0.15.11
  1562. 397.05 s > Checking pathdiff v0.2.3
  1563. 397.05 s > Checking unarray v0.1.4
  1564. 397.05 s > Checking proptest v1.11.0
  1565. 397.05 s > Compiling test-log-macros v0.2.20
  1566. 397.05 s > Checking kurvst v0.1.0 (/build/source/crates/kurvst)
  1567. 397.05 s > Checking similar-asserts v1.7.0
  1568. 397.05 s > Checking clinnet v0.1.8 (/build/source/crates/clinnet)
  1569. 397.05 s > Compiling graphica v2.1.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  1570. 397.05 s > Checking test-log v0.2.20
  1571. 397.05 s > Checking statrs v0.16.1
  1572. 397.05 s > Checking momtrop v0.3.0
  1573. 397.05 s > Compiling pyo3-macros v0.28.3
  1574. 397.05 s > Checking gungraun v0.18.2
  1575. 397.05 s > Compiling pyo3-stub-gen-derive v0.17.2
  1576. 397.05 s > Checking pyo3-stub-gen v0.17.2
  1577. 397.05 s > Checking symbolica-utils v0.1.0 (/build/source/crates/symbolica-utils)
  1578. 397.05 s > Checking spenso-macros v0.3.2 (/build/source/crates/spenso-macros)
  1579. 397.05 s > Compiling gammaloop-workspace-hack v0.1.0 (/build/source/crates/gammaloop-workspace-hack)
  1580. 397.05 s > Checking linnet v0.17.0 (/build/source/crates/linnet)
  1581. 397.05 s > Checking spenso v0.6.0 (/build/source/crates/spenso)
  1582. 397.05 s > Checking linnet-py v0.1.0 (/build/source/crates/linnet-py)
  1583. 397.05 s > Checking linnest v0.1.0 (/build/source/crates/linnest)
  1584. 397.05 s > Checking idenso v0.3.0 (/build/source/crates/idenso)
  1585. 397.05 s > Checking gammaloop-tracing-filter v0.1.0 (/build/source/crates/gammaloop-tracing-filter)
  1586. 397.05 s > Checking spenso-hep-lib v0.1.7 (/build/source/crates/spenso-hep-lib)
  1587. 397.05 s > Checking spynso3 v0.1.2 (/build/source/crates/spynso3)
  1588. 397.05 s > error: manual implementation of an assign operation
  1589. 397.05 s > --> crates/gammalooprs/src/integrands/process/gammaloop_sample.rs:755:21
  1590. 397.05 s > |
  1591. 397.05 s > 755 | sample.sample.jacobian = sample.sample.jacobian * F::from_f64(partition_weight);
  1592. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace it with: `sample.sample.jacobian *= F::from_f64(partition_weight)`
  1593. 397.05 s > |
  1594. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#assign_op_pattern
  1595. 397.05 s > = note: `-D clippy::assign-op-pattern` implied by `-D warnings`
  1596. 397.05 s > = help: to override `-D warnings` add `#[allow(clippy::assign_op_pattern)]`
  1597. 397.05 s >
  1598. 397.05 s > error: doc list item without indentation
  1599. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:311:5
  1600. 397.05 s > |
  1601. 397.05 s > 311 | /// a selected LMB into a parent frame; graph code supplies the matrix and
  1602. 397.05 s > | ^
  1603. 397.05 s > |
  1604. 397.05 s > = help: if this is supposed to be its own paragraph, add a blank line
  1605. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#doc_lazy_continuation
  1606. 397.05 s > = note: `-D clippy::doc-lazy-continuation` implied by `-D warnings`
  1607. 397.05 s > = help: to override `-D warnings` add `#[allow(clippy::doc_lazy_continuation)]`
  1608. 397.05 s > help: indent this line
  1609. 397.05 s > |
  1610. 397.05 s > 311 | /// a selected LMB into a parent frame; graph code supplies the matrix and
  1611. 397.05 s > | ++
  1612. 397.05 s >
  1613. 397.05 s > error: doc list item without indentation
  1614. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:312:5
  1615. 397.05 s > |
  1616. 397.05 s > 312 | /// translation after resolving the relevant edge signatures and external data.
  1617. 397.05 s > | ^
  1618. 397.05 s > |
  1619. 397.05 s > = help: if this is supposed to be its own paragraph, add a blank line
  1620. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#doc_lazy_continuation
  1621. 397.05 s > help: indent this line
  1622. 397.05 s > |
  1623. 397.05 s > 312 | /// translation after resolving the relevant edge signatures and external data.
  1624. 397.05 s > | ++
  1625. 397.05 s >
  1626. 397.05 s > error: the loop variable `column` is only used to index `augmented`
  1627. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:404:31
  1628. 397.05 s > |
  1629. 397.05 s > 404 | for column in 0..2 * dimension {
  1630. 397.05 s > | ^^^^^^^^^^^^^^^^
  1631. 397.05 s > |
  1632. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#needless_range_loop
  1633. 397.05 s > = note: `-D clippy::needless-range-loop` implied by `-D warnings`
  1634. 397.05 s > = help: to override `-D warnings` add `#[allow(clippy::needless_range_loop)]`
  1635. 397.05 s > help: consider using an iterator
  1636. 397.05 s > |
  1637. 397.05 s > 404 - for column in 0..2 * dimension {
  1638. 397.05 s > 404 + for <item> in augmented.iter_mut().take(2 * dimension) {
  1639. 397.05 s > |
  1640. 397.05 s >
  1641. 397.05 s > error: this `if` statement can be collapsed
  1642. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:1915:9
  1643. 397.05 s > |
  1644. 397.05 s > 1915 | / if let SamplingMapDefinition::Lmb(edges) = &definition {
  1645. 397.05 s > 1916 | | if edges.len() != n_loop_momenta {
  1646. 397.05 s > 1917 | | return Err(eyre!(
  1647. 397.05 s > 1918 | | "lmb definition has {} edges, but the kernel has {} loop coordinates",
  1648. 397.05 s > ... |
  1649. 397.05 s > 1923 | | }
  1650. 397.05 s > | |_________^
  1651. 397.05 s > |
  1652. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1653. 397.05 s > = note: `-D clippy::collapsible-if` implied by `-D warnings`
  1654. 397.05 s > = help: to override `-D warnings` add `#[allow(clippy::collapsible_if)]`
  1655. 397.05 s > help: collapse nested if block
  1656. 397.05 s > |
  1657. 397.05 s > 1915 ~ if let SamplingMapDefinition::Lmb(edges) = &definition
  1658. 397.05 s > 1916 ~ && edges.len() != n_loop_momenta {
  1659. 397.05 s > 1917 | return Err(eyre!(
  1660. 397.05 s > ...
  1661. 397.05 s > 1921 | ));
  1662. 397.05 s > 1922 ~ }
  1663. 397.05 s > |
  1664. 397.05 s >
  1665. 397.05 s > error: manual implementation of `.is_multiple_of()`
  1666. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_reference.rs:135:12
  1667. 397.05 s > |
  1668. 397.05 s > 135 | if center.len() % 3 != 0 {
  1669. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^ help: replace with: `!center.len().is_multiple_of(3)`
  1670. 397.05 s > |
  1671. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#manual_is_multiple_of
  1672. 397.05 s > = note: `-D clippy::manual-is-multiple-of` implied by `-D warnings`
  1673. 397.05 s > = help: to override `-D warnings` add `#[allow(clippy::manual_is_multiple_of)]`
  1674. 397.05 s >
  1675. 397.05 s > error: manual implementation of `.is_multiple_of()`
  1676. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:758:47
  1677. 397.05 s > |
  1678. 397.05 s > 758 | if self.raw_coordinates.is_empty() || self.raw_coordinates.len() % 3 != 0 {
  1679. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `!self.raw_coordinates.len().is_multiple_of(3)`
  1680. 397.05 s > |
  1681. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#manual_is_multiple_of
  1682. 397.05 s >
  1683. 397.05 s > error: this `if` statement can be collapsed
  1684. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1214:5
  1685. 397.05 s > |
  1686. 397.05 s > 1214 | / if let Some(graph_id) = context.graph_id {
  1687. 397.05 s > 1215 | | if graph_id != prepared.graph_id {
  1688. 397.05 s > 1216 | | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  1689. 397.05 s > 1217 | | channel: channel.to_owned(),
  1690. 397.05 s > ... |
  1691. 397.05 s > 1224 | | }
  1692. 397.05 s > | |_____^
  1693. 397.05 s > |
  1694. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1695. 397.05 s > help: collapse nested if block
  1696. 397.05 s > |
  1697. 397.05 s > 1214 ~ if let Some(graph_id) = context.graph_id
  1698. 397.05 s > 1215 ~ && graph_id != prepared.graph_id {
  1699. 397.05 s > 1216 | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  1700. 397.05 s > ...
  1701. 397.05 s > 1222 | });
  1702. 397.05 s > 1223 ~ }
  1703. 397.05 s > |
  1704. 397.05 s >
  1705. 397.05 s > error: this `if` statement can be collapsed
  1706. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1234:5
  1707. 397.05 s > |
  1708. 397.05 s > 1234 | / if let Some(cut_id) = context.cut_id {
  1709. 397.05 s > 1235 | | if cut_id != prepared.cut_id {
  1710. 397.05 s > 1236 | | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  1711. 397.05 s > 1237 | | channel: channel.to_owned(),
  1712. 397.05 s > ... |
  1713. 397.05 s > 1244 | | }
  1714. 397.05 s > | |_____^
  1715. 397.05 s > |
  1716. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1717. 397.05 s > help: collapse nested if block
  1718. 397.05 s > |
  1719. 397.05 s > 1234 ~ if let Some(cut_id) = context.cut_id
  1720. 397.05 s > 1235 ~ && cut_id != prepared.cut_id {
  1721. 397.05 s > 1236 | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  1722. 397.05 s > ...
  1723. 397.05 s > 1242 | });
  1724. 397.05 s > 1243 ~ }
  1725. 397.05 s > |
  1726. 397.05 s >
  1727. 397.05 s > error: very complex type used. Consider factoring parts into `type` definitions
  1728. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1543:6
  1729. 397.05 s > |
  1730. 397.05 s > 1543 | ) -> Result<
  1731. 397.05 s > | ______^
  1732. 397.05 s > 1544 | | (
  1733. 397.05 s > 1545 | | Vec<Box<dyn SamplingMapComponent>>,
  1734. 397.05 s > 1546 | | Vec<Vec<usize>>,
  1735. 397.05 s > ... |
  1736. 397.05 s > 1549 | | SamplingChannelCompileError,
  1737. 397.05 s > 1550 | | > {
  1738. 397.05 s > | |_^
  1739. 397.05 s > |
  1740. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#type_complexity
  1741. 397.05 s > = note: `-D clippy::type-complexity` implied by `-D warnings`
  1742. 397.05 s > = help: to override `-D warnings` add `#[allow(clippy::type_complexity)]`
  1743. 397.05 s >
  1744. 397.05 s > error: this `if` statement can be collapsed
  1745. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2224:13
  1746. 397.05 s > |
  1747. 397.05 s > 2224 | / if let SamplingChannelSelector::Named(name) = selector {
  1748. 397.05 s > 2225 | | if let Some(channel) = resolved.named(name) {
  1749. 397.05 s > 2226 | | let entry = SamplingCatalogueEntry::Named(channel.clone());
  1750. 397.05 s > 2227 | | if !entries.contains(&entry) {
  1751. 397.05 s > ... |
  1752. 397.05 s > 2231 | | }
  1753. 397.05 s > | |_____________^
  1754. 397.05 s > |
  1755. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1756. 397.05 s > help: collapse nested if block
  1757. 397.05 s > |
  1758. 397.05 s > 2224 ~ if let SamplingChannelSelector::Named(name) = selector
  1759. 397.05 s > 2225 ~ && let Some(channel) = resolved.named(name) {
  1760. 397.05 s > 2226 | let entry = SamplingCatalogueEntry::Named(channel.clone());
  1761. 397.05 s > ...
  1762. 397.05 s > 2229 | }
  1763. 397.05 s > 2230 ~ }
  1764. 397.05 s > |
  1765. 397.05 s >
  1766. 397.05 s > error: this `if` statement can be collapsed
  1767. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2249:13
  1768. 397.05 s > |
  1769. 397.05 s > 2249 | / if basis_ids.is_empty() && optimized_lmbs.is_empty() {
  1770. 397.05 s > 2250 | | if let Some((basis_id, _)) = all_lmbs.first() {
  1771. 397.05 s > 2251 | | basis_ids.push(*basis_id);
  1772. 397.05 s > 2252 | | }
  1773. 397.05 s > 2253 | | }
  1774. 397.05 s > | |_____________^
  1775. 397.05 s > |
  1776. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1777. 397.05 s > help: collapse nested if block
  1778. 397.05 s > |
  1779. 397.05 s > 2249 ~ if basis_ids.is_empty() && optimized_lmbs.is_empty()
  1780. 397.05 s > 2250 ~ && let Some((basis_id, _)) = all_lmbs.first() {
  1781. 397.05 s > 2251 | basis_ids.push(*basis_id);
  1782. 397.05 s > 2252 ~ }
  1783. 397.05 s > |
  1784. 397.05 s >
  1785. 397.05 s > error: using `clone` on type `Complex<F<f64>>` which implements the `Copy` trait
  1786. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:160:32
  1787. 397.05 s > |
  1788. 397.05 s > 160 | value: value.values[0].clone(),
  1789. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `value.values[0]`
  1790. 397.05 s > |
  1791. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  1792. 397.05 s > = note: `-D clippy::clone-on-copy` implied by `-D warnings`
  1793. 397.05 s > = help: to override `-D warnings` add `#[allow(clippy::clone_on_copy)]`
  1794. 397.05 s >
  1795. 397.05 s > error: the loop variable `column` is only used to index `work`
  1796. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:324:27
  1797. 397.05 s > |
  1798. 397.05 s > 324 | for column in (pivot + 1)..dimension {
  1799. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^
  1800. 397.05 s > |
  1801. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#needless_range_loop
  1802. 397.05 s > help: consider using an iterator
  1803. 397.05 s > |
  1804. 397.05 s > 324 - for column in (pivot + 1)..dimension {
  1805. 397.05 s > 324 + for <item> in work.iter_mut().take(dimension).skip((pivot + 1)) {
  1806. 397.05 s > |
  1807. 397.05 s >
  1808. 397.05 s > error: you seem to be trying to use `match` to destructure a single infallible pattern. Consider using `let`
  1809. 397.05 s > --> crates/gammalooprs/src/integrate/mod.rs:3342:5
  1810. 397.05 s > |
  1811. 397.05 s > 3342 | / let process_integrand = match integrand {
  1812. 397.05 s > 3343 | | Integrand::ProcessIntegrand(process_integrand) => process_integrand,
  1813. 397.05 s > 3344 | | #[cfg(test)]
  1814. 397.05 s > 3345 | | Integrand::TestProbe(_) => return Vec::new(),
  1815. 397.05 s > 3346 | | };
  1816. 397.05 s > | |______^ help: try: `let Integrand::ProcessIntegrand(process_integrand) = integrand;`
  1817. 397.05 s > |
  1818. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#infallible_destructuring_match
  1819. 397.05 s > = note: `-D clippy::infallible-destructuring-match` implied by `-D warnings`
  1820. 397.05 s > = help: to override `-D warnings` add `#[allow(clippy::infallible_destructuring_match)]`
  1821. 397.05 s >
  1822. 397.05 s > error: you seem to be trying to use `match` to destructure a single infallible pattern. Consider using `let`
  1823. 397.05 s > --> crates/gammalooprs/src/integrate/mod.rs:3359:5
  1824. 397.05 s > |
  1825. 397.05 s > 3359 | / let process_integrand = match integrand {
  1826. 397.05 s > 3360 | | Integrand::ProcessIntegrand(process_integrand) => process_integrand,
  1827. 397.05 s > 3361 | | #[cfg(test)]
  1828. 397.05 s > 3362 | | Integrand::TestProbe(_) => return false,
  1829. 397.05 s > 3363 | | };
  1830. 397.05 s > | |______^ help: try: `let Integrand::ProcessIntegrand(process_integrand) = integrand;`
  1831. 397.05 s > |
  1832. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#infallible_destructuring_match
  1833. 397.05 s >
  1834. 397.05 s > error: this `impl` can be derived
  1835. 397.05 s > --> crates/gammalooprs/src/settings/runtime.rs:1259:1
  1836. 397.05 s > |
  1837. 397.05 s > 1259 | / impl Default for SamplingChannelDefinition {
  1838. 397.05 s > 1260 | | fn default() -> Self {
  1839. 397.05 s > 1261 | | Self {
  1840. 397.05 s > 1262 | | around: String::new(),
  1841. 397.05 s > ... |
  1842. 397.05 s > 1268 | | }
  1843. 397.05 s > | |_^
  1844. 397.05 s > |
  1845. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#derivable_impls
  1846. 397.05 s > = note: `-D clippy::derivable-impls` implied by `-D warnings`
  1847. 397.05 s > = help: to override `-D warnings` add `#[allow(clippy::derivable_impls)]`
  1848. 397.05 s > help: replace the manual implementation with a derive attribute
  1849. 397.05 s > |
  1850. 397.05 s > 1249 + #[derive(Default)]
  1851. 397.05 s > 1250 | pub struct SamplingChannelDefinition {
  1852. 397.05 s > |
  1853. 397.05 s >
  1854. 397.05 s > error: this `impl` can be derived
  1855. 397.05 s > --> crates/gammalooprs/src/settings/runtime.rs:1285:1
  1856. 397.05 s > |
  1857. 397.05 s > 1285 | / impl Default for SamplingChannelSelection {
  1858. 397.05 s > 1286 | | fn default() -> Self {
  1859. 397.05 s > 1287 | | Self {
  1860. 397.05 s > 1288 | | weight: SamplingChannelWeight::default(),
  1861. 397.05 s > ... |
  1862. 397.05 s > 1294 | | }
  1863. 397.05 s > | |_^
  1864. 397.05 s > |
  1865. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#derivable_impls
  1866. 397.05 s > help: replace the manual implementation with a derive attribute
  1867. 397.05 s > |
  1868. 397.05 s > 1277 + #[derive(Default)]
  1869. 397.05 s > 1278 | pub struct SamplingChannelSelection {
  1870. 397.05 s > |
  1871. 397.05 s >
  1872. 397.05 s > error: could not compile `gammalooprs` (lib) due to 18 previous errors
  1873. 397.05 s > warning: build failed, waiting for other jobs to finish...
  1874. 397.05 s > error: using `clone` on type `F<f64>` which implements the `Copy` trait
  1875. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:2358:14
  1876. 397.05 s > |
  1877. 397.05 s > 2358 | (point.jacobian.clone() * point.inverse_jacobian.clone() - F(1.0)).abs() < F(1.0e-12)
  1878. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `point.jacobian`
  1879. 397.05 s > |
  1880. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  1881. 397.05 s > = note: `-D clippy::clone-on-copy` implied by `-D warnings`
  1882. 397.05 s > = help: to override `-D warnings` add `#[allow(clippy::clone_on_copy)]`
  1883. 397.05 s >
  1884. 397.05 s > error: using `clone` on type `F<f64>` which implements the `Copy` trait
  1885. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:2358:39
  1886. 397.05 s > |
  1887. 397.05 s > 2358 | (point.jacobian.clone() * point.inverse_jacobian.clone() - F(1.0)).abs() < F(1.0e-12)
  1888. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `point.inverse_jacobian`
  1889. 397.05 s > |
  1890. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  1891. 397.05 s >
  1892. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  1893. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2725:9
  1894. 397.05 s > |
  1895. 397.05 s > 2725 | selection.default_channel_selection = vec!["missing".into()];
  1896. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1897. 397.05 s > |
  1898. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["missing".into()], ..Default::default() }` and removing relevant reassignments
  1899. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2724:9
  1900. 397.05 s > |
  1901. 397.05 s > 2724 | let mut selection = SamplingChannelSelection::default();
  1902. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1903. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1904. 397.05 s > = note: `-D clippy::field-reassign-with-default` implied by `-D warnings`
  1905. 397.05 s > = help: to override `-D warnings` add `#[allow(clippy::field_reassign_with_default)]`
  1906. 397.05 s >
  1907. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  1908. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2745:9
  1909. 397.05 s > |
  1910. 397.05 s > 2745 | selection.default_channel_selection = vec!["named".into()];
  1911. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1912. 397.05 s > |
  1913. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["named".into()], ..Default::default() }` and removing relevant reassignments
  1914. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2744:9
  1915. 397.05 s > |
  1916. 397.05 s > 2744 | let mut selection = SamplingChannelSelection::default();
  1917. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1918. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1919. 397.05 s >
  1920. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  1921. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2768:9
  1922. 397.05 s > |
  1923. 397.05 s > 2768 | selection.default_channel_selection = vec!["threshold".into()];
  1924. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1925. 397.05 s > |
  1926. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  1927. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2767:9
  1928. 397.05 s > |
  1929. 397.05 s > 2767 | let mut selection = SamplingChannelSelection::default();
  1930. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1931. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1932. 397.05 s >
  1933. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  1934. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2820:9
  1935. 397.05 s > |
  1936. 397.05 s > 2820 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  1937. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1938. 397.05 s > |
  1939. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  1940. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2819:9
  1941. 397.05 s > |
  1942. 397.05 s > 2819 | let mut selection = SamplingChannelSelection::default();
  1943. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1944. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1945. 397.05 s >
  1946. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  1947. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2837:9
  1948. 397.05 s > |
  1949. 397.05 s > 2837 | selection.default_channel_selection = vec!["auto:surfaces".into(), "auto:lmb".into()];
  1950. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1951. 397.05 s > |
  1952. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:surfaces".into(), "auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  1953. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2836:9
  1954. 397.05 s > |
  1955. 397.05 s > 2836 | let mut selection = SamplingChannelSelection::default();
  1956. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1957. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1958. 397.05 s >
  1959. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  1960. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2847:9
  1961. 397.05 s > |
  1962. 397.05 s > 2847 | selection.default_channel_selection = vec!["auto:surfaces".into()];
  1963. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1964. 397.05 s > |
  1965. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:surfaces".into()], ..Default::default() }` and removing relevant reassignments
  1966. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2846:9
  1967. 397.05 s > |
  1968. 397.05 s > 2846 | let mut selection = SamplingChannelSelection::default();
  1969. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1970. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1971. 397.05 s >
  1972. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  1973. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2868:13
  1974. 397.05 s > |
  1975. 397.05 s > 2868 | selection.default_channel_selection = vec![preset.into()];
  1976. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1977. 397.05 s > |
  1978. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec![preset.into()], ..Default::default() }` and removing relevant reassignments
  1979. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2867:13
  1980. 397.05 s > |
  1981. 397.05 s > 2867 | let mut selection = SamplingChannelSelection::default();
  1982. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1983. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1984. 397.05 s >
  1985. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  1986. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2899:9
  1987. 397.05 s > |
  1988. 397.05 s > 2899 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  1989. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1990. 397.05 s > |
  1991. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  1992. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2898:9
  1993. 397.05 s > |
  1994. 397.05 s > 2898 | let mut selection = SamplingChannelSelection::default();
  1995. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1996. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1997. 397.05 s >
  1998. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  1999. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2981:13
  2000. 397.05 s > |
  2001. 397.05 s > 2981 | selection.default_channel_selection = vec![name.to_owned()];
  2002. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2003. 397.05 s > |
  2004. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec![name.to_owned()], ..Default::default() }` and removing relevant reassignments
  2005. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2980:13
  2006. 397.05 s > |
  2007. 397.05 s > 2980 | let mut selection = SamplingChannelSelection::default();
  2008. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2009. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2010. 397.05 s >
  2011. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2012. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3015:9
  2013. 397.05 s > |
  2014. 397.05 s > 3015 | selection.default_channel_selection = vec!["threshold".into()];
  2015. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2016. 397.05 s > |
  2017. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  2018. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3014:9
  2019. 397.05 s > |
  2020. 397.05 s > 3014 | let mut selection = SamplingChannelSelection::default();
  2021. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2022. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2023. 397.05 s >
  2024. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2025. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3060:9
  2026. 397.05 s > |
  2027. 397.05 s > 3060 | selection.default_channel_selection = vec!["conditional".into()];
  2028. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2029. 397.05 s > |
  2030. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["conditional".into()], ..Default::default() }` and removing relevant reassignments
  2031. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3059:9
  2032. 397.05 s > |
  2033. 397.05 s > 3059 | let mut selection = SamplingChannelSelection::default();
  2034. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2035. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2036. 397.05 s >
  2037. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2038. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3122:9
  2039. 397.05 s > |
  2040. 397.05 s > 3122 | selection.default_channel_selection = vec!["h".into(), "z".into()];
  2041. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2042. 397.05 s > |
  2043. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["h".into(), "z".into()], ..Default::default() }` and removing relevant reassignments
  2044. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3121:9
  2045. 397.05 s > |
  2046. 397.05 s > 3121 | let mut selection = SamplingChannelSelection::default();
  2047. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2048. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2049. 397.05 s >
  2050. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2051. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3166:9
  2052. 397.05 s > |
  2053. 397.05 s > 3166 | selection.default_channel_selection = vec!["auto:lmb".into()];
  2054. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2055. 397.05 s > |
  2056. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  2057. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3165:9
  2058. 397.05 s > |
  2059. 397.05 s > 3165 | let mut selection = SamplingChannelSelection::default();
  2060. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2061. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2062. 397.05 s >
  2063. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2064. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3188:9
  2065. 397.05 s > |
  2066. 397.05 s > 3188 | selection.default_channel_selection = vec!["auto:lmb".into()];
  2067. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2068. 397.05 s > |
  2069. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  2070. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3187:9
  2071. 397.05 s > |
  2072. 397.05 s > 3187 | let mut selection = SamplingChannelSelection::default();
  2073. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2074. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2075. 397.05 s >
  2076. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2077. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3240:9
  2078. 397.05 s > |
  2079. 397.05 s > 3240 | selection.default_channel_selection = vec!["named".into()];
  2080. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2081. 397.05 s > |
  2082. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["named".into()], ..Default::default() }` and removing relevant reassignments
  2083. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3239:9
  2084. 397.05 s > |
  2085. 397.05 s > 3239 | let mut selection = SamplingChannelSelection::default();
  2086. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2087. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2088. 397.05 s >
  2089. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2090. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3289:9
  2091. 397.05 s > |
  2092. 397.05 s > 3289 | selection.default_channel_selection = vec!["threshold".into()];
  2093. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2094. 397.05 s > |
  2095. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  2096. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3288:9
  2097. 397.05 s > |
  2098. 397.05 s > 3288 | let mut selection = SamplingChannelSelection::default();
  2099. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2100. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2101. 397.05 s >
  2102. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2103. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3336:9
  2104. 397.05 s > |
  2105. 397.05 s > 3336 | selection.default_channel_selection = vec!["cut_channel".into()];
  2106. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2107. 397.05 s > |
  2108. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_channel".into()], ..Default::default() }` and removing relevant reassignments
  2109. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3335:9
  2110. 397.05 s > |
  2111. 397.05 s > 3335 | let mut selection = SamplingChannelSelection::default();
  2112. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2113. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2114. 397.05 s >
  2115. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2116. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3366:9
  2117. 397.05 s > |
  2118. 397.05 s > 3366 | selection.default_channel_selection = vec!["right_channel".into()];
  2119. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2120. 397.05 s > |
  2121. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["right_channel".into()], ..Default::default() }` and removing relevant reassignments
  2122. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3365:9
  2123. 397.05 s > |
  2124. 397.05 s > 3365 | let mut selection = SamplingChannelSelection::default();
  2125. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2126. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2127. 397.05 s >
  2128. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2129. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3393:9
  2130. 397.05 s > |
  2131. 397.05 s > 3393 | selection.default_channel_selection = vec!["cut_chart".into()];
  2132. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2133. 397.05 s > |
  2134. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_chart".into()], ..Default::default() }` and removing relevant reassignments
  2135. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3392:9
  2136. 397.05 s > |
  2137. 397.05 s > 3392 | let mut selection = SamplingChannelSelection::default();
  2138. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2139. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2140. 397.05 s >
  2141. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2142. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3419:9
  2143. 397.05 s > |
  2144. 397.05 s > 3419 | selection.default_channel_selection = vec!["cut_chart".into()];
  2145. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2146. 397.05 s > |
  2147. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_chart".into()], ..Default::default() }` and removing relevant reassignments
  2148. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3418:9
  2149. 397.05 s > |
  2150. 397.05 s > 3418 | let mut selection = SamplingChannelSelection::default();
  2151. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2152. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2153. 397.05 s >
  2154. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2155. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3496:9
  2156. 397.05 s > |
  2157. 397.05 s > 3496 | selection.default_channel_selection = vec!["left_target".into()];
  2158. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2159. 397.05 s > |
  2160. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["left_target".into()], ..Default::default() }` and removing relevant reassignments
  2161. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3495:9
  2162. 397.05 s > |
  2163. 397.05 s > 3495 | let mut selection = SamplingChannelSelection::default();
  2164. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2165. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2166. 397.05 s >
  2167. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2168. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3540:9
  2169. 397.05 s > |
  2170. 397.05 s > 3540 | selection.default_channel_selection = vec!["threshold".into()];
  2171. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2172. 397.05 s > |
  2173. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  2174. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3539:9
  2175. 397.05 s > |
  2176. 397.05 s > 3539 | let mut selection = SamplingChannelSelection::default();
  2177. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2178. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2179. 397.05 s >
  2180. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2181. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3564:9
  2182. 397.05 s > |
  2183. 397.05 s > 3564 | selection.default_channel_selection = vec!["joint".into()];
  2184. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2185. 397.05 s > |
  2186. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  2187. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3563:9
  2188. 397.05 s > |
  2189. 397.05 s > 3563 | let mut selection = SamplingChannelSelection::default();
  2190. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2191. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2192. 397.05 s >
  2193. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2194. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3597:9
  2195. 397.05 s > |
  2196. 397.05 s > 3597 | selection.default_channel_selection = vec!["joint".into()];
  2197. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2198. 397.05 s > |
  2199. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  2200. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3596:9
  2201. 397.05 s > |
  2202. 397.05 s > 3596 | let mut selection = SamplingChannelSelection::default();
  2203. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2204. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2205. 397.05 s >
  2206. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2207. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3654:9
  2208. 397.05 s > |
  2209. 397.05 s > 3654 | selection.default_channel_selection = vec!["joint".into()];
  2210. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2211. 397.05 s > |
  2212. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  2213. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3653:9
  2214. 397.05 s > |
  2215. 397.05 s > 3653 | let mut selection = SamplingChannelSelection::default();
  2216. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2217. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2218. 397.05 s >
  2219. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2220. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3758:9
  2221. 397.05 s > |
  2222. 397.05 s > 3758 | selection.default_channel_selection = vec!["auto:lmb".into()];
  2223. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2224. 397.05 s > |
  2225. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  2226. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3757:9
  2227. 397.05 s > |
  2228. 397.05 s > 3757 | let mut selection = SamplingChannelSelection::default();
  2229. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2230. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2231. 397.05 s >
  2232. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2233. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3806:9
  2234. 397.05 s > |
  2235. 397.05 s > 3806 | selection.default_channel_selection = vec!["auto:lmb".into()];
  2236. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2237. 397.05 s > |
  2238. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  2239. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3805:9
  2240. 397.05 s > |
  2241. 397.05 s > 3805 | let mut selection = SamplingChannelSelection::default();
  2242. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2243. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2244. 397.05 s >
  2245. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2246. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3838:9
  2247. 397.05 s > |
  2248. 397.05 s > 3838 | selection.default_channel_selection = vec!["auto:lmb".into()];
  2249. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2250. 397.05 s > |
  2251. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  2252. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3837:9
  2253. 397.05 s > |
  2254. 397.05 s > 3837 | let mut selection = SamplingChannelSelection::default();
  2255. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2256. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2257. 397.05 s >
  2258. 397.05 s > error: using `clone` on type `Complex<F<f64>>` which implements the `Copy` trait
  2259. 397.05 s > --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:160:32
  2260. 397.05 s > |
  2261. 397.05 s > 160 | value: value.values[0].clone(),
  2262. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `value.values[0]`
  2263. 397.05 s > |
  2264. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  2265. 397.05 s >
  2266. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2267. 397.05 s > --> crates/gammalooprs/src/integrands/process/mod.rs:5610:9
  2268. 397.05 s > |
  2269. 397.05 s > 5610 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  2270. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2271. 397.05 s > |
  2272. 397.05 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  2273. 397.05 s > --> crates/gammalooprs/src/integrands/process/mod.rs:5609:9
  2274. 397.05 s > |
  2275. 397.05 s > 5609 | let mut selection = SamplingChannelSelection::default();
  2276. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2277. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2278. 397.05 s >
  2279. 397.05 s > error: field assignment outside of initializer for an instance created with Default::default()
  2280. 397.05 s > --> crates/gammalooprs/src/integrands/process/mod.rs:5613:9
  2281. 397.05 s > |
  2282. 397.05 s > 5613 | parameterization_settings.sampling_channels = selection;
  2283. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2284. 397.05 s > |
  2285. 397.05 s > note: consider initializing the variable with `settings::runtime::ParameterizationSettings { sampling_channels: selection, ..Default::default() }` and removing relevant reassignments
  2286. 397.05 s > --> crates/gammalooprs/src/integrands/process/mod.rs:5612:9
  2287. 397.05 s > |
  2288. 397.05 s > 5612 | let mut parameterization_settings = ParameterizationSettings::default();
  2289. 397.05 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2290. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2291. 397.05 s >
  2292. 397.05 s > error: large size difference between variants
  2293. 397.05 s > --> crates/gammalooprs/src/integrands/mod.rs:54:1
  2294. 397.05 s > |
  2295. 397.05 s > 54 | / pub enum Integrand {
  2296. 397.05 s > 55 | | ProcessIntegrand(Box<ProcessIntegrand>),
  2297. 397.05 s > | | --------------------------------------- the second-largest variant contains at least 8 bytes
  2298. 397.05 s > 56 | | #[cfg(test)]
  2299. 397.05 s > 57 | | TestProbe(TestProbeIntegrand),
  2300. 397.05 s > | | ----------------------------- the largest variant contains at least 888 bytes
  2301. 397.05 s > 58 | | }
  2302. 397.05 s > | |_^ the entire enum is at least 888 bytes
  2303. 397.05 s > |
  2304. 397.05 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#large_enum_variant
  2305. 397.05 s > = note: `-D clippy::large-enum-variant` implied by `-D warnings`
  2306. 397.05 s > = help: to override `-D warnings` add `#[allow(clippy::large_enum_variant)]`
  2307. 397.05 s > help: consider boxing the large fields or introducing indirection in some other way to reduce the total size of the enum
  2308. 397.05 s > |
  2309. 397.05 s > 57 - TestProbe(TestProbeIntegrand),
  2310. 397.05 s > 57 + TestProbe(Box<TestProbeIntegrand>),
  2311. 397.05 s > |
  2312. 397.05 s >
  2313. 397.05 s > error: could not compile `gammalooprs` (lib test) due to 49 previous errors
  2314. 397.05 s For full logs, run:
  2315. 397.05 s nix log /nix/store/d8iasrfw09rzwhag7rn1lmbxvmrz8ks5-gammaloop-workspace-clippy-0.1.0.drv
  2316. 397.11 s Build failed.
More Logs Raw Logs

Agent Instructions

Wait for completion, without logs:

curl --netrc -N https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/b07cda5e2fe2c7fceb47fc6663b349b5d9ebf5db/a6275d92-aa5a-4ec4-8b66-8eb37254b05c/wait

Latest logs, with timestamps (streams while running):

curl --netrc -N https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/b07cda5e2fe2c7fceb47fc6663b349b5d9ebf5db/a6275d92-aa5a-4ec4-8b66-8eb37254b05c/tail

All logs, with timestamps (available after completion):

curl --netrc https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/b07cda5e2fe2c7fceb47fc6663b349b5d9ebf5db/a6275d92-aa5a-4ec4-8b66-8eb37254b05c/logs

Raw logs, from the start (no timestamps):

curl --netrc -N https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/b07cda5e2fe2c7fceb47fc6663b349b5d9ebf5db/a6275d92-aa5a-4ec4-8b66-8eb37254b05c/raw-logs

Content types available for /logs and /tail (use Accept header):

Example:

curl --netrc -H "Accept: text/csv" https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/b07cda5e2fe2c7fceb47fc6663b349b5d9ebf5db/a6275d92-aa5a-4ec4-8b66-8eb37254b05c/logs

Reproduce locally: https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/b07cda5e2fe2c7fceb47fc6663b349b5d9ebf5db/a6275d92-aa5a-4ec4-8b66-8eb37254b05c/repro

This page is also available in machine-friendly formats. Request one with the Accept header:

For more instructions, fetch https://nix-ci.com/instructions .