build checks.x86_64-linux.gammaloop-clippy

Reproduce this run
Retry Run
  1. 0.00 s $ /nix/store/9ypz3flqsrl5xl495mm8h645gadjsxi1-coreutils-9.11/bin/timeout --kill-after=15s 7200s /nix/store/23zk8sgzamrbmj1fday15szf7f2279s8-nix-2.34.7/bin/nix --extra-experimental-features nix-command --extra-experimental-features flakes --log-format internal-json build --no-link --print-out-paths git+https://github.com/alphal00p/gammaloop?ref=advanced_sampling&rev=f991b56ff9e316a33c50dbe0152b84de28ffecfb&shallow=1#checks.x86_64-linux.gammaloop-clippy --print-build-logs
  2. 2.18 s
  3. 2.40 s Building /nix/store/z8sf2mg4fcvfiz9rpa1fig6kk8xplfhj-gammaloop-workspace-clippy-0.1.0.drv
  4. 2.46 s [gammaloop-workspace-clippy] Phase: unpackPhase
  5. 2.46 s [gammaloop-workspace-clippy] unpacking source archive /nix/store/d6ym1w3z3dvqglkyhyd37z00vfsb641k-source
  6. 2.60 s [gammaloop-workspace-clippy] source root is source
  7. 2.62 s [gammaloop-workspace-clippy] Phase: patchPhase
  8. 2.63 s [gammaloop-workspace-clippy] Executing configureCargoCommonVars
  9. 2.63 s [gammaloop-workspace-clippy] decompressing cargo artifacts from /nix/store/50vpxlcgfxf2d57i27v3d10zjwxxbm2r-gammaloop-workspace-deps-deps-0.1.0/target.tar.zst to target
  10. 3.66 s [gammaloop-workspace-clippy] Phase: updateAutotoolsGnuConfigScriptsPhase
  11. 3.70 s [gammaloop-workspace-clippy] Phase: configurePhase
  12. 3.70 s [gammaloop-workspace-clippy] will append /build/source/.cargo-home/config.toml with contents of /nix/store/5drf77x6km4ky7gwlrzdx9bbd6fz09g3-vendor-cargo-deps/config.toml
  13. 3.70 s [gammaloop-workspace-clippy] default configurePhase, nothing to do
  14. 3.71 s [gammaloop-workspace-clippy] Phase: buildPhase
  15. 3.71 s [gammaloop-workspace-clippy] +++ command cargo --version
  16. 3.71 s [gammaloop-workspace-clippy] cargo 1.97.0 (c980f4866 2026-06-30)
  17. 3.74 s [gammaloop-workspace-clippy] +++ command cargo clippy --profile ci-optim --locked --workspace --features gammaloop-tracing-filter/clap,gammaloop-tracing-filter/symbolica,idenso/bincode,idenso/reference-cases,linnet/bincode,linnet/drawing,linnet/rkyv,linnet/serde,linnet/symbolica,spenso-macros/shadowing,spenso/shadowing,symbolica/tracing_max_level_info,three-dimensional-reps/display,three-dimensional-reps/eval,three-dimensional-reps/serde --all-targets --no-deps -- --deny warnings
  18. 4.17 s [gammaloop-workspace-clippy] Checking cfg-if v1.0.4
  19. 4.17 s [gammaloop-workspace-clippy] Checking memchr v2.8.0
  20. 4.17 s [gammaloop-workspace-clippy] Checking once_cell v1.21.4
  21. 4.18 s [gammaloop-workspace-clippy] Checking either v1.15.0
  22. 4.18 s [gammaloop-workspace-clippy] Checking serde_core v1.0.228
  23. 4.18 s [gammaloop-workspace-clippy] Checking libc v0.2.186
  24. 4.19 s [gammaloop-workspace-clippy] Checking libm v0.2.16
  25. 4.19 s [gammaloop-workspace-clippy] Checking itoa v1.0.18
  26. 4.19 s [gammaloop-workspace-clippy] Checking log v0.4.29
  27. 4.19 s [gammaloop-workspace-clippy] Checking regex-syntax v0.8.10
  28. 4.20 s [gammaloop-workspace-clippy] Checking zerocopy v0.8.48
  29. 4.20 s [gammaloop-workspace-clippy] Checking crossbeam-utils v0.8.21
  30. 4.21 s [gammaloop-workspace-clippy] Checking equivalent v1.0.2
  31. 4.22 s [gammaloop-workspace-clippy] Checking zmij v1.0.21
  32. 4.22 s [gammaloop-workspace-clippy] Checking bytemuck v1.25.0
  33. 4.22 s [gammaloop-workspace-clippy] Checking lazy_static v1.5.0
  34. 4.23 s [gammaloop-workspace-clippy] Compiling target-lexicon v0.13.5
  35. 4.24 s [gammaloop-workspace-clippy] Checking arrayvec v0.7.6
  36. 4.26 s [gammaloop-workspace-clippy] Checking powerfmt v0.2.0
  37. 4.27 s [gammaloop-workspace-clippy] Checking num-conv v0.2.1
  38. 4.28 s [gammaloop-workspace-clippy] Checking num_threads v0.1.7
  39. 4.29 s [gammaloop-workspace-clippy] Checking itertools v0.14.0
  40. 4.30 s [gammaloop-workspace-clippy] Checking pin-project-lite v0.2.17
  41. 4.33 s [gammaloop-workspace-clippy] Checking time-core v0.1.8
  42. 4.34 s [gammaloop-workspace-clippy] Checking tracing-core v0.1.36
  43. 4.35 s [gammaloop-workspace-clippy] Checking deranged v0.5.8
  44. 4.35 s [gammaloop-workspace-clippy] Checking foldhash v0.2.0
  45. 4.36 s [gammaloop-workspace-clippy] Checking allocator-api2 v0.2.21
  46. 4.36 s [gammaloop-workspace-clippy] Checking const-random v0.1.18
  47. 4.39 s [gammaloop-workspace-clippy] Checking safe_arch v0.7.4
  48. 4.40 s [gammaloop-workspace-clippy] Checking static_assertions v1.1.0
  49. 4.42 s [gammaloop-workspace-clippy] Checking winnow v1.0.2
  50. 4.44 s [gammaloop-workspace-clippy] Checking unty v0.0.4
  51. 4.45 s [gammaloop-workspace-clippy] Checking nu-ansi-term v0.50.3
  52. 4.48 s [gammaloop-workspace-clippy] Checking safe_arch v1.0.0
  53. 4.53 s [gammaloop-workspace-clippy] Checking aho-corasick v1.1.4
  54. 4.54 s [gammaloop-workspace-clippy] Checking crossbeam-epoch v0.9.18
  55. 4.58 s [gammaloop-workspace-clippy] Checking wide v0.7.33
  56. 4.63 s [gammaloop-workspace-clippy] Checking sharded-slab v0.1.7
  57. 4.64 s [gammaloop-workspace-clippy] Checking tracing v0.1.44
  58. 4.73 s [gammaloop-workspace-clippy] Checking hashbrown v0.16.1
  59. 4.74 s [gammaloop-workspace-clippy] Checking crossbeam-deque v0.8.6
  60. 4.74 s [gammaloop-workspace-clippy] Checking tracing-log v0.2.0
  61. 4.76 s [gammaloop-workspace-clippy] Checking thread_local v1.1.9
  62. 4.84 s [gammaloop-workspace-clippy] Checking rayon-core v1.13.0
  63. 4.87 s [gammaloop-workspace-clippy] Checking num-traits v0.2.19
  64. 4.89 s [gammaloop-workspace-clippy] Checking az v1.3.0
  65. 4.95 s [gammaloop-workspace-clippy] Checking toml_writer v1.1.1+spec-1.1.0
  66. 4.98 s [gammaloop-workspace-clippy] Checking indenter v0.3.4
  67. 5.13 s [gammaloop-workspace-clippy] Checking wide v1.3.0
  68. 5.15 s [gammaloop-workspace-clippy] Compiling phf_shared v0.11.3
  69. 5.23 s [gammaloop-workspace-clippy] Checking anyhow v1.0.102
  70. 5.30 s [gammaloop-workspace-clippy] Checking rawpointer v0.2.1
  71. 5.31 s [gammaloop-workspace-clippy] Checking toml_parser v1.1.2+spec-1.1.0
  72. 5.32 s [gammaloop-workspace-clippy] Checking alloc-no-stdlib v2.0.4
  73. 5.33 s [gammaloop-workspace-clippy] Checking dyn-clone v1.0.20
  74. 5.33 s [gammaloop-workspace-clippy] Checking utf8parse v0.2.2
  75. 5.38 s [gammaloop-workspace-clippy] Checking matrixmultiply v0.3.10
  76. 5.38 s [gammaloop-workspace-clippy] Checking alloc-stdlib v0.2.2
  77. 5.38 s [gammaloop-workspace-clippy] Checking colorchoice v1.0.5
  78. 5.39 s [gammaloop-workspace-clippy] Checking anstyle-parse v1.0.0
  79. 5.40 s [gammaloop-workspace-clippy] Checking rayon v1.12.0
  80. 5.41 s [gammaloop-workspace-clippy] Checking getrandom v0.3.4
  81. 5.43 s [gammaloop-workspace-clippy] Checking time v0.3.47
  82. 5.43 s [gammaloop-workspace-clippy] Checking gmp-mpfr-sys v1.7.1
  83. 5.45 s [gammaloop-workspace-clippy] Checking anstyle-query v1.1.5
  84. 5.49 s [gammaloop-workspace-clippy] Checking is_terminal_polyfill v1.70.2
  85. 5.50 s [gammaloop-workspace-clippy] Checking approx v0.5.1
  86. 5.50 s [gammaloop-workspace-clippy] Checking rand_core v0.9.5
  87. 5.53 s [gammaloop-workspace-clippy] Checking num-integer v0.1.46
  88. 5.58 s [gammaloop-workspace-clippy] Checking anstyle v1.0.14
  89. 5.62 s [gammaloop-workspace-clippy] Checking colored v3.1.1
  90. 5.66 s [gammaloop-workspace-clippy] Compiling phf_generator v0.11.3
  91. 5.67 s [gammaloop-workspace-clippy] Checking eyre v0.6.12
  92. 5.69 s [gammaloop-workspace-clippy] Checking serde v1.0.228
  93. 5.70 s [gammaloop-workspace-clippy] Checking serde_json v1.0.149
  94. 5.71 s [gammaloop-workspace-clippy] Checking regex-automata v0.4.14
  95. 5.75 s [gammaloop-workspace-clippy] Checking bitflags v2.11.1
  96. 5.76 s [gammaloop-workspace-clippy] Checking serde_spanned v1.1.1
  97. 5.76 s [gammaloop-workspace-clippy] Checking toml_datetime v1.1.1+spec-1.1.0
  98. 5.80 s [gammaloop-workspace-clippy] Checking anstream v1.0.0
  99. 5.87 s [gammaloop-workspace-clippy] Checking unicode-width v0.2.2
  100. 5.88 s [gammaloop-workspace-clippy] Checking bitflags v1.3.2
  101. 5.89 s [gammaloop-workspace-clippy] Checking brotli-decompressor v5.0.0
  102. 5.92 s [gammaloop-workspace-clippy] Checking wasmtime-jit-icache-coherence v34.0.2
  103. 5.93 s [gammaloop-workspace-clippy] Compiling phf_codegen v0.11.3
  104. 5.96 s [gammaloop-workspace-clippy] Checking toml v1.1.2+spec-1.1.0
  105. 5.96 s [gammaloop-workspace-clippy] Checking region v3.0.2
  106. 5.98 s [gammaloop-workspace-clippy] Checking hugepage-rs v0.1.1
  107. 6.02 s [gammaloop-workspace-clippy] Checking spec_math v0.1.6
  108. 6.05 s [gammaloop-workspace-clippy] Checking inventory v0.3.24
  109. 6.06 s [gammaloop-workspace-clippy] Checking thiserror v2.0.18
  110. 6.07 s [gammaloop-workspace-clippy] Compiling getopts v0.2.24
  111. 6.09 s [gammaloop-workspace-clippy] Checking libloading v0.9.0
  112. 6.11 s [gammaloop-workspace-clippy] Checking smallvec v1.15.1
  113. 6.12 s [gammaloop-workspace-clippy] Checking num-complex v0.4.6
  114. 6.13 s [gammaloop-workspace-clippy] Checking bincode v2.0.1
  115. 6.15 s [gammaloop-workspace-clippy] Compiling pyo3-build-config v0.28.3
  116. 6.19 s [gammaloop-workspace-clippy] Checking tracing-serde v0.2.0
  117. 6.21 s [gammaloop-workspace-clippy] Checking smartstring v1.0.1
  118. 6.24 s [gammaloop-workspace-clippy] Checking byteorder v1.5.0
  119. 6.32 s [gammaloop-workspace-clippy] Checking self_cell v1.2.2
  120. 6.33 s [gammaloop-workspace-clippy] Checking append-only-vec v0.1.8
  121. 6.36 s [gammaloop-workspace-clippy] Checking bytes v1.11.1
  122. 6.38 s [gammaloop-workspace-clippy] Checking tinyjson v2.5.1
  123. 6.40 s [gammaloop-workspace-clippy] Checking simba v0.9.1
  124. 6.41 s [gammaloop-workspace-clippy] Compiling unicode_names2_generator v1.3.0
  125. 6.42 s [gammaloop-workspace-clippy] Compiling unic-common v0.9.0
  126. 6.48 s [gammaloop-workspace-clippy] Checking linux-raw-sys v0.12.1
  127. 6.50 s [gammaloop-workspace-clippy] Compiling unic-char-range v0.9.0
  128. 6.57 s [gammaloop-workspace-clippy] Compiling unic-char-property v0.9.0
  129. 6.58 s [gammaloop-workspace-clippy] Compiling unic-ucd-version v0.9.0
  130. 6.61 s [gammaloop-workspace-clippy] Checking brotli v8.0.2
  131. 6.65 s [gammaloop-workspace-clippy] Compiling is-macro v0.3.7
  132. 6.66 s [gammaloop-workspace-clippy] Compiling rustpython-parser-vendored v0.4.0
  133. 6.67 s [gammaloop-workspace-clippy] Checking iana-time-zone v0.1.65
  134. 6.68 s [gammaloop-workspace-clippy] Checking rustix v1.1.4
  135. 6.69 s [gammaloop-workspace-clippy] Compiling rustpython-parser v0.4.0
  136. 6.71 s [gammaloop-workspace-clippy] Compiling phf v0.11.3
  137. 6.73 s [gammaloop-workspace-clippy] Checking rustc-hash v2.1.2
  138. 6.77 s [gammaloop-workspace-clippy] Checking chrono v0.4.44
  139. 6.80 s [gammaloop-workspace-clippy] Compiling unic-ucd-ident v0.9.0
  140. 6.82 s [gammaloop-workspace-clippy] Compiling unic-emoji-char v0.9.0
  141. 6.83 s [gammaloop-workspace-clippy] Checking ndarray v0.17.2
  142. 6.93 s [gammaloop-workspace-clippy] Compiling lalrpop-util v0.20.2
  143. 6.95 s [gammaloop-workspace-clippy] Compiling rustc-hash v1.1.0
  144. 6.96 s [gammaloop-workspace-clippy] Checking rug v1.30.0
  145. 6.99 s [gammaloop-workspace-clippy] Checking unicode-segmentation v1.13.2
  146. 7.03 s [gammaloop-workspace-clippy] Compiling symbolica v2.2.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  147. 7.11 s [gammaloop-workspace-clippy] Checking typenum v1.20.0
  148. 7.15 s [gammaloop-workspace-clippy] Checking getrandom v0.2.17
  149. 7.20 s [gammaloop-workspace-clippy] Checking ppv-lite86 v0.2.21
  150. 7.23 s [gammaloop-workspace-clippy] Checking ahash v0.8.12
  151. 7.28 s [gammaloop-workspace-clippy] Checking scopeguard v1.2.0
  152. 7.33 s [gammaloop-workspace-clippy] Checking lock_api v0.4.14
  153. 7.42 s [gammaloop-workspace-clippy] Checking rand_chacha v0.9.0
  154. 7.44 s [gammaloop-workspace-clippy] Checking parking_lot_core v0.9.12
  155. 7.45 s [gammaloop-workspace-clippy] Checking hashbrown v0.17.0
  156. 7.49 s [gammaloop-workspace-clippy] Checking unicode-ident v1.0.24
  157. 7.54 s [gammaloop-workspace-clippy] Checking rand v0.9.4
  158. 7.57 s [gammaloop-workspace-clippy] Checking parking_lot v0.12.5
  159. 7.58 s [gammaloop-workspace-clippy] Checking errno v0.3.14
  160. 7.60 s [gammaloop-workspace-clippy] Checking unicase v2.9.0
  161. 7.67 s [gammaloop-workspace-clippy] Checking generic-array v0.14.7
  162. 7.68 s [gammaloop-workspace-clippy] Checking strsim v0.11.1
  163. 7.72 s [gammaloop-workspace-clippy] Checking clap_lex v1.1.0
  164. 7.73 s [gammaloop-workspace-clippy] Checking signal-hook-registry v1.4.8
  165. 7.82 s [gammaloop-workspace-clippy] Checking vte v0.14.1
  166. 7.84 s [gammaloop-workspace-clippy] Checking same-file v1.0.6
  167. 7.85 s [gammaloop-workspace-clippy] Checking matchers v0.2.0
  168. 7.88 s [gammaloop-workspace-clippy] Checking regex v1.12.3
  169. 7.92 s [gammaloop-workspace-clippy] Checking terminal_size v0.4.4
  170. 7.93 s [gammaloop-workspace-clippy] Checking signal-hook v0.3.18
  171. 7.93 s [gammaloop-workspace-clippy] Checking walkdir v2.5.0
  172. 7.94 s [gammaloop-workspace-clippy] Checking tracing-subscriber v0.3.23
  173. 7.95 s [gammaloop-workspace-clippy] Checking indexmap v2.14.0
  174. 7.99 s [gammaloop-workspace-clippy] Checking clap_builder v4.6.0
  175. 7.99 s [gammaloop-workspace-clippy] Checking symjit v2.21.0
  176. 8.05 s [gammaloop-workspace-clippy] Checking half v2.7.1
  177. 8.06 s [gammaloop-workspace-clippy] Checking block-buffer v0.10.4
  178. 8.06 s [gammaloop-workspace-clippy] Checking crypto-common v0.1.7
  179. 8.14 s [gammaloop-workspace-clippy] Checking mio v1.2.0
  180. 8.16 s [gammaloop-workspace-clippy] Checking minimal-lexical v0.2.1
  181. 8.21 s [gammaloop-workspace-clippy] Checking ciborium-io v0.2.2
  182. 8.24 s [gammaloop-workspace-clippy] Checking ciborium-ll v0.2.2
  183. 8.25 s [gammaloop-workspace-clippy] Checking digest v0.10.7
  184. 8.35 s [gammaloop-workspace-clippy] Checking derive_more v2.1.1
  185. 8.40 s [gammaloop-workspace-clippy] Checking console v0.16.3
  186. 8.41 s [gammaloop-workspace-clippy] Checking num-bigint v0.4.6
  187. 8.42 s [gammaloop-workspace-clippy] Checking bstr v1.12.1
  188. 8.43 s [gammaloop-workspace-clippy] Checking nom v7.1.3
  189. 8.44 s [gammaloop-workspace-clippy] Checking signal-hook-mio v0.2.5
  190. 8.52 s [gammaloop-workspace-clippy] Checking cpufeatures v0.2.17
  191. 8.57 s [gammaloop-workspace-clippy] Checking linux-raw-sys v0.4.15
  192. 8.63 s [gammaloop-workspace-clippy] Checking winnow v0.7.15
  193. 8.67 s [gammaloop-workspace-clippy] Checking globset v0.4.18
  194. 8.75 s [gammaloop-workspace-clippy] Checking rustix v0.38.44
  195. 8.76 s [gammaloop-workspace-clippy] Checking sha2 v0.10.9
  196. 8.83 s [gammaloop-workspace-clippy] Checking ciborium v0.2.2
  197. 8.96 s [gammaloop-workspace-clippy] Checking getrandom v0.4.2
  198. 9.03 s [gammaloop-workspace-clippy] Checking rand_core v0.6.4
  199. 9.08 s [gammaloop-workspace-clippy] Checking fastrand v2.4.1
  200. 9.16 s [gammaloop-workspace-clippy] Checking fnv v1.0.7
  201. 9.18 s [gammaloop-workspace-clippy] Checking plotters-backend v0.3.7
  202. 9.19 s [gammaloop-workspace-clippy] Checking crossterm v0.28.1
  203. 9.20 s [gammaloop-workspace-clippy] Checking rust-embed-utils v8.11.0
  204. 9.21 s [gammaloop-workspace-clippy] Compiling unicode_names2 v1.3.0
  205. 9.22 s [gammaloop-workspace-clippy] Checking serde_spanned v0.6.9
  206. 9.24 s [gammaloop-workspace-clippy] Checking tempfile v3.27.0
  207. 9.26 s [gammaloop-workspace-clippy] Checking clap v4.6.1
  208. 9.29 s [gammaloop-workspace-clippy] Checking toml_datetime v0.6.11
  209. 9.32 s [gammaloop-workspace-clippy] Checking itertools v0.10.5
  210. 9.32 s [gammaloop-workspace-clippy] Checking plotters-svg v0.3.7
  211. 9.34 s [gammaloop-workspace-clippy] Checking cast v0.3.0
  212. 9.37 s [gammaloop-workspace-clippy] Checking xprec v0.2.2
  213. 9.41 s [gammaloop-workspace-clippy] Checking tap v1.0.1
  214. 9.42 s [gammaloop-workspace-clippy] Checking toml_write v0.1.2
  215. 9.43 s [gammaloop-workspace-clippy] Checking plotters v0.3.7
  216. 9.45 s [gammaloop-workspace-clippy] Checking rand_chacha v0.3.1
  217. 9.46 s [gammaloop-workspace-clippy] Checking radium v0.7.0
  218. 9.46 s [gammaloop-workspace-clippy] Checking wyz v0.5.1
  219. 9.52 s [gammaloop-workspace-clippy] Checking typeid v1.0.3
  220. 9.55 s [gammaloop-workspace-clippy] Checking similar v2.7.0
  221. 9.55 s [gammaloop-workspace-clippy] Checking tinytemplate v1.2.1
  222. 9.57 s [gammaloop-workspace-clippy] Checking ansitok v0.3.0
  223. 9.57 s [gammaloop-workspace-clippy] Checking is-terminal v0.4.17
  224. 9.61 s [gammaloop-workspace-clippy] Checking funty v2.0.0
  225. 9.63 s [gammaloop-workspace-clippy] Checking bytecount v0.6.9
  226. 9.64 s [gammaloop-workspace-clippy] Checking anes v0.1.6
  227. 9.66 s [gammaloop-workspace-clippy] Checking toml_edit v0.22.27
  228. 9.74 s [gammaloop-workspace-clippy] Checking oorandom v11.1.5
  229. 9.74 s [gammaloop-workspace-clippy] Checking rand v0.8.6
  230. 9.79 s [gammaloop-workspace-clippy] Checking ron v0.12.1
  231. 9.82 s [gammaloop-workspace-clippy] Checking toml_edit v0.25.11+spec-1.1.0
  232. 9.85 s [gammaloop-workspace-clippy] Checking ansi-str v0.9.0
  233. 9.93 s [gammaloop-workspace-clippy] Checking bitvec v1.0.1
  234. 9.93 s [gammaloop-workspace-clippy] Checking testing_table v0.3.0
  235. 9.96 s [gammaloop-workspace-clippy] Checking env_filter v1.0.1
  236. 9.99 s [gammaloop-workspace-clippy] Checking uncased v0.9.10
  237. 10.04 s [gammaloop-workspace-clippy] Checking criterion-plot v0.5.0
  238. 10.05 s [gammaloop-workspace-clippy] Checking jiff v0.2.24
  239. 10.09 s [gammaloop-workspace-clippy] Checking ptr_meta v0.1.4
  240. 10.10 s [gammaloop-workspace-clippy] Checking simdutf8 v0.1.5
  241. 10.14 s [gammaloop-workspace-clippy] Checking ucd-trie v0.1.7
  242. 10.15 s [gammaloop-workspace-clippy] Checking ahash v0.7.8
  243. 10.21 s [gammaloop-workspace-clippy] Checking pest v2.8.6
  244. 10.22 s [gammaloop-workspace-clippy] Checking bytecheck v0.6.12
  245. 10.23 s [gammaloop-workspace-clippy] Checking criterion v0.5.1
  246. 10.24 s [gammaloop-workspace-clippy] Checking papergrid v0.17.0
  247. 10.25 s [gammaloop-workspace-clippy] Checking approx v0.4.0
  248. 10.30 s [gammaloop-workspace-clippy] Checking hashbrown v0.12.3
  249. 10.31 s [gammaloop-workspace-clippy] Checking seahash v4.1.0
  250. 10.42 s [gammaloop-workspace-clippy] Checking cgmath v0.18.0
  251. 10.51 s [gammaloop-workspace-clippy] Checking num-rational v0.4.2
  252. 10.54 s [gammaloop-workspace-clippy] Checking rend v0.4.2
  253. 10.63 s [gammaloop-workspace-clippy] Checking num-iter v0.1.45
  254. 10.69 s [gammaloop-workspace-clippy] Checking ref-ops v0.2.5
  255. 10.71 s [gammaloop-workspace-clippy] Checking insta v1.47.2
  256. 10.74 s [gammaloop-workspace-clippy] Checking rand_xoshiro v0.6.0
  257. 10.87 s [gammaloop-workspace-clippy] Checking features v0.10.0
  258. 10.91 s [gammaloop-workspace-clippy] Checking gat-lending-iterator v0.1.8
  259. 10.91 s [gammaloop-workspace-clippy] Checking num v0.4.3
  260. 10.98 s [gammaloop-workspace-clippy] Checking dot-parser v0.5.1
  261. 10.99 s [gammaloop-workspace-clippy] Checking constcat v0.5.1
  262. 11.04 s [gammaloop-workspace-clippy] Checking colored v2.2.0
  263. 11.06 s [gammaloop-workspace-clippy] Checking toml v0.8.23
  264. 11.07 s [gammaloop-workspace-clippy] Checking arrayref v0.3.9
  265. 11.10 s [gammaloop-workspace-clippy] Checking constant_time_eq v0.4.2
  266. 11.11 s [gammaloop-workspace-clippy] Checking tabled v0.20.0
  267. 11.13 s [gammaloop-workspace-clippy] Checking cpufeatures v0.3.0
  268. 11.17 s [gammaloop-workspace-clippy] Checking base64 v0.22.1
  269. 11.17 s [gammaloop-workspace-clippy] Checking blake3 v1.8.5
  270. 11.19 s [gammaloop-workspace-clippy] Checking joinery v2.1.0
  271. 11.31 s [gammaloop-workspace-clippy] Checking siphasher v1.0.2
  272. 11.34 s [gammaloop-workspace-clippy] Checking titlecase v2.2.1
  273. 11.34 s [gammaloop-workspace-clippy] Checking subprocess v0.2.15
  274. 11.37 s [gammaloop-workspace-clippy] Checking figment v0.10.19
  275. 11.39 s [gammaloop-workspace-clippy] Checking rust_lisp v0.18.0
  276. 11.40 s [gammaloop-workspace-clippy] Compiling vakint v0.1.2 (/build/source/crates/vakint)
  277. 11.41 s [gammaloop-workspace-clippy] Checking phf_shared v0.13.1
  278. 11.42 s [gammaloop-workspace-clippy] Checking version-compare v0.2.1
  279. 11.52 s [gammaloop-workspace-clippy] Checking phf v0.13.1
  280. 11.54 s [gammaloop-workspace-clippy] Checking xpct v0.5.1
  281. 11.54 s [gammaloop-workspace-clippy] Checking ryu v1.0.23
  282. 11.56 s [gammaloop-workspace-clippy] Compiling pyo3-ffi v0.28.3
  283. 11.60 s [gammaloop-workspace-clippy] Compiling pyo3-macros-backend v0.28.3
  284. 11.61 s [gammaloop-workspace-clippy] Compiling pyo3 v0.28.3
  285. 11.63 s [gammaloop-workspace-clippy] Compiling numpy v0.28.0
  286. 11.63 s [gammaloop-workspace-clippy] Checking string-template-plus v0.4.3
  287. 11.65 s [gammaloop-workspace-clippy] Checking castaway v0.2.4
  288. 11.68 s [gammaloop-workspace-clippy] Checking toml_datetime v0.7.5+spec-1.1.0
  289. 11.69 s [gammaloop-workspace-clippy] Checking strum v0.27.2
  290. 11.70 s [gammaloop-workspace-clippy] Checking compact_str v0.9.0
  291. 11.75 s [gammaloop-workspace-clippy] Checking unicode-truncate v2.0.1
  292. 11.81 s [gammaloop-workspace-clippy] Checking toml v0.9.12+spec-1.1.0
  293. 11.85 s [gammaloop-workspace-clippy] Checking kasuari v0.4.12
  294. 11.86 s [gammaloop-workspace-clippy] Checking lru v0.16.4
  295. 11.87 s [gammaloop-workspace-clippy] Checking vte v0.15.0
  296. 11.88 s [gammaloop-workspace-clippy] Checking portable-atomic v1.13.1
  297. 11.91 s [gammaloop-workspace-clippy] Checking unit-prefix v0.5.2
  298. 11.92 s [gammaloop-workspace-clippy] Checking rand_distr v0.4.3
  299. 11.94 s [gammaloop-workspace-clippy] Checking simba v0.6.0
  300. 11.95 s [gammaloop-workspace-clippy] Checking line-clipping v0.3.7
  301. 11.96 s [gammaloop-workspace-clippy] Checking vt100 v0.16.2
  302. 11.97 s [gammaloop-workspace-clippy] Compiling three-dimensional-reps v0.1.0 (/build/source/crates/three-dimensional-reps)
  303. 12.03 s [gammaloop-workspace-clippy] Checking gimli v0.32.3
  304. 12.05 s [gammaloop-workspace-clippy] Checking adler2 v2.0.1
  305. 12.05 s [gammaloop-workspace-clippy] Checking ratatui-core v0.1.0
  306. 12.10 s [gammaloop-workspace-clippy] Checking miniz_oxide v0.8.9
  307. 12.14 s [gammaloop-workspace-clippy] Checking thiserror v1.0.69
  308. 12.17 s [gammaloop-workspace-clippy] Checking derive_builder v0.11.2
  309. 12.20 s [gammaloop-workspace-clippy] Checking crossterm v0.29.0
  310. 12.20 s [gammaloop-workspace-clippy] Checking object v0.37.3
  311. 12.21 s [gammaloop-workspace-clippy] Checking owo-colors v4.3.0
  312. 12.21 s [gammaloop-workspace-clippy] Checking env_logger v0.11.10
  313. 12.23 s [gammaloop-workspace-clippy] Checking indicatif v0.18.4
  314. 12.25 s [gammaloop-workspace-clippy] Checking tracing-error v0.2.1
  315. 12.27 s [gammaloop-workspace-clippy] Checking typed-index-collections v3.5.0
  316. 12.35 s [gammaloop-workspace-clippy] Checking serde-big-array v0.5.1
  317. 12.36 s [gammaloop-workspace-clippy] Checking amd v0.2.2
  318. 12.37 s [gammaloop-workspace-clippy] Checking itertools v0.11.0
  319. 12.39 s [gammaloop-workspace-clippy] Compiling rustpython-parser-core v0.4.0
  320. 12.40 s [gammaloop-workspace-clippy] Compiling gammaloop-tracing-filter-macros v0.1.0 (/build/source/crates/gammaloop-tracing-filter-macros)
  321. 12.42 s [gammaloop-workspace-clippy] Checking option-ext v0.2.0
  322. 12.45 s [gammaloop-workspace-clippy] Checking rustc-demangle v0.1.27
  323. 12.47 s [gammaloop-workspace-clippy] Checking dirs-sys v0.5.0
  324. 12.48 s [gammaloop-workspace-clippy] Checking rkyv v0.7.46
  325. 12.52 s [gammaloop-workspace-clippy] Compiling rustpython-ast v0.4.0
  326. 12.55 s [gammaloop-workspace-clippy] Checking ref-cast v1.0.25
  327. 12.58 s [gammaloop-workspace-clippy] Checking nix v0.31.2
  328. 12.59 s [gammaloop-workspace-clippy] Checking integer-sqrt v0.1.5
  329. 12.63 s [gammaloop-workspace-clippy] Checking brotli-decompressor v4.0.3
  330. 12.64 s [gammaloop-workspace-clippy] Checking crossbeam-channel v0.5.15
  331. 12.64 s [gammaloop-workspace-clippy] Checking itertools v0.12.1
  332. 12.69 s [gammaloop-workspace-clippy] Checking symlink v0.1.0
  333. 12.70 s [gammaloop-workspace-clippy] Compiling gammalooprs v0.3.4 (/build/source/crates/gammalooprs)
  334. 12.73 s [gammaloop-workspace-clippy] Checking unsafe-libyaml v0.2.11
  335. 12.77 s [gammaloop-workspace-clippy] Checking ratatui-widgets v0.3.0
  336. 12.80 s [gammaloop-workspace-clippy] Checking color-spantrace v0.3.0
  337. 12.90 s [gammaloop-workspace-clippy] Checking ratatui-crossterm v0.1.0
  338. 12.91 s [gammaloop-workspace-clippy] Checking tracing-appender v0.2.5
  339. 12.96 s [gammaloop-workspace-clippy] Checking include_dir v0.7.4
  340. 12.97 s [gammaloop-workspace-clippy] Checking ctrlc v3.5.2
  341. 13.00 s [gammaloop-workspace-clippy] Checking pathfinding v4.15.0
  342. 13.02 s [gammaloop-workspace-clippy] Checking tracing-indicatif v0.3.14
  343. 13.02 s [gammaloop-workspace-clippy] Checking schemars v1.2.1
  344. 13.13 s [gammaloop-workspace-clippy] Checking slotmap v1.1.1
  345. 13.13 s [gammaloop-workspace-clippy] Checking dirs v6.0.0
  346. 13.14 s [gammaloop-workspace-clippy] Checking clarabel v0.11.1
  347. 13.17 s [gammaloop-workspace-clippy] Checking json5 v0.4.1
  348. 13.21 s [gammaloop-workspace-clippy] Checking brotli v7.0.0
  349. 13.21 s [gammaloop-workspace-clippy] Checking serde_yaml v0.9.34+deprecated
  350. 13.36 s [gammaloop-workspace-clippy] Checking vectorize v0.2.0
  351. 13.38 s [gammaloop-workspace-clippy] Checking base62 v2.2.4
  352. 13.40 s [gammaloop-workspace-clippy] Checking ringbuffer v0.16.0
  353. 13.46 s [gammaloop-workspace-clippy] Checking ratatui-macros v0.7.0
  354. 13.50 s [gammaloop-workspace-clippy] Checking ratatui v0.30.0
  355. 13.50 s [gammaloop-workspace-clippy] Checking rust-embed v8.11.0
  356. 13.51 s [gammaloop-workspace-clippy] Checking addr2line v0.25.1
  357. 13.51 s [gammaloop-workspace-clippy] Checking clap_complete v4.6.3
  358. 13.56 s [gammaloop-workspace-clippy] Checking strip-ansi-escapes v0.2.1
  359. 13.57 s [gammaloop-workspace-clippy] Checking fd-lock v4.0.4
  360. 13.58 s [gammaloop-workspace-clippy] Compiling gammaloop-api v0.1.0 (/build/source/crates/gammaloop-api)
  361. 13.59 s [gammaloop-workspace-clippy] Checking itertools v0.13.0
  362. 13.61 s [gammaloop-workspace-clippy] Checking strum v0.26.3
  363. 13.64 s [gammaloop-workspace-clippy] Checking sysinfo v0.33.1
  364. 13.67 s [gammaloop-workspace-clippy] Checking shlex v1.3.0
  365. 13.69 s [gammaloop-workspace-clippy] Checking slab v0.4.12
  366. 13.75 s [gammaloop-workspace-clippy] Checking clap_complete_nushell v4.6.0
  367. 13.76 s [gammaloop-workspace-clippy] Checking futures-task v0.3.32
  368. 13.80 s [gammaloop-workspace-clippy] Checking futures-core v0.3.32
  369. 13.81 s [gammaloop-workspace-clippy] Checking sdd v3.0.10
  370. 13.83 s [gammaloop-workspace-clippy] Compiling gammaloop-integration-tests v0.1.0 (/build/source/tests)
  371. 13.85 s [gammaloop-workspace-clippy] Compiling test-log-core v0.2.20
  372. 13.87 s [gammaloop-workspace-clippy] Checking futures-util v0.3.32
  373. 13.92 s [gammaloop-workspace-clippy] Compiling rustc_version v0.4.1
  374. 13.95 s [gammaloop-workspace-clippy] Checking which v8.0.2
  375. 13.96 s [gammaloop-workspace-clippy] Checking scc v2.4.0
  376. 14.09 s [gammaloop-workspace-clippy] Compiling numerica v2.2.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  377. 14.16 s [gammaloop-workspace-clippy] Checking bincode v1.3.3
  378. 14.36 s [gammaloop-workspace-clippy] Compiling gungraun-runner v0.18.2
  379. 14.39 s [gammaloop-workspace-clippy] Checking backtrace v0.3.76
  380. 14.46 s [gammaloop-workspace-clippy] Checking nalgebra v0.29.0
  381. 14.55 s [gammaloop-workspace-clippy] Compiling gungraun-macros v0.8.0
  382. 14.56 s [gammaloop-workspace-clippy] Checking reedline v0.42.0
  383. 14.68 s [gammaloop-workspace-clippy] Checking color-eyre v0.6.5
  384. 14.82 s [gammaloop-workspace-clippy] Checking proc-macro2 v1.0.106
  385. 14.90 s [gammaloop-workspace-clippy] Checking base64 v0.21.7
  386. 15.06 s [gammaloop-workspace-clippy] Checking maplit v1.0.2
  387. 15.07 s [gammaloop-workspace-clippy] Checking ron v0.8.1
  388. 15.10 s [gammaloop-workspace-clippy] Compiling iai-callgrind-runner v0.14.2
  389. 15.13 s [gammaloop-workspace-clippy] Checking quote v1.0.45
  390. 15.14 s [gammaloop-workspace-clippy] Checking futures-executor v0.3.32
  391. 15.24 s [gammaloop-workspace-clippy] Checking serial_test v3.4.0
  392. 15.25 s [gammaloop-workspace-clippy] Checking kurbo v0.13.0
  393. 15.27 s [gammaloop-workspace-clippy] Checking wait-timeout v0.2.1
  394. 15.29 s [gammaloop-workspace-clippy] Compiling iai-callgrind v0.14.2
  395. 15.34 s [gammaloop-workspace-clippy] Checking quick-error v1.2.3
  396. 15.36 s [gammaloop-workspace-clippy] Compiling test-log-macros v0.2.20
  397. 15.37 s [gammaloop-workspace-clippy] Checking bit-vec v0.8.0
  398. 15.39 s [gammaloop-workspace-clippy] Checking rusty-fork v0.3.1
  399. 15.50 s [gammaloop-workspace-clippy] Checking syn v2.0.117
  400. 15.51 s [gammaloop-workspace-clippy] Compiling iai-callgrind-macros v0.5.1
  401. 15.53 s [gammaloop-workspace-clippy] Checking bit-set v0.8.0
  402. 15.54 s [gammaloop-workspace-clippy] Checking rand_xorshift v0.4.0
  403. 15.60 s [gammaloop-workspace-clippy] Checking console v0.15.11
  404. 15.61 s [gammaloop-workspace-clippy] Checking unarray v0.1.4
  405. 15.66 s [gammaloop-workspace-clippy] Checking pathdiff v0.2.3
  406. 15.73 s [gammaloop-workspace-clippy] Checking proptest v1.11.0
  407. 15.85 s [gammaloop-workspace-clippy] Checking similar-asserts v1.7.0
  408. 15.93 s [gammaloop-workspace-clippy] Checking clinnet v0.1.8 (/build/source/crates/clinnet)
  409. 15.95 s [gammaloop-workspace-clippy] Checking kurvst v0.1.0 (/build/source/crates/kurvst)
  410. 16.88 s [gammaloop-workspace-clippy] Compiling graphica v2.1.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  411. 17.07 s [gammaloop-workspace-clippy] Checking test-log v0.2.20
  412. 18.35 s [gammaloop-workspace-clippy] Checking statrs v0.16.1
  413. 18.79 s [gammaloop-workspace-clippy] Checking momtrop v0.3.0
  414. 19.85 s [gammaloop-workspace-clippy] Checking gungraun v0.18.2
  415. 21.48 s [gammaloop-workspace-clippy] Compiling pyo3-stub-gen-derive v0.17.2
  416. 21.54 s [gammaloop-workspace-clippy] Compiling pyo3-macros v0.28.3
  417. 25.58 s [gammaloop-workspace-clippy] Checking pyo3-stub-gen v0.17.2
  418. 30.69 s [gammaloop-workspace-clippy] Checking symbolica-utils v0.1.0 (/build/source/crates/symbolica-utils)
  419. 30.69 s [gammaloop-workspace-clippy] Checking spenso-macros v0.3.2 (/build/source/crates/spenso-macros)
  420. 228.07 s [gammaloop-workspace-clippy] Compiling gammaloop-workspace-hack v0.1.0 (/build/source/crates/gammaloop-workspace-hack)
  421. 228.26 s [gammaloop-workspace-clippy] Checking linnet v0.17.0 (/build/source/crates/linnet)
  422. 232.26 s [gammaloop-workspace-clippy] Checking spenso v0.6.0 (/build/source/crates/spenso)
  423. 232.31 s [gammaloop-workspace-clippy] Checking linnet-py v0.1.0 (/build/source/crates/linnet-py)
  424. 232.31 s [gammaloop-workspace-clippy] Checking linnest v0.1.0 (/build/source/crates/linnest)
  425. 237.43 s [gammaloop-workspace-clippy] Checking idenso v0.3.0 (/build/source/crates/idenso)
  426. 237.43 s [gammaloop-workspace-clippy] Checking gammaloop-tracing-filter v0.1.0 (/build/source/crates/gammaloop-tracing-filter)
  427. 239.34 s [gammaloop-workspace-clippy] Checking spenso-hep-lib v0.1.7 (/build/source/crates/spenso-hep-lib)
  428. 239.52 s [gammaloop-workspace-clippy] Checking spynso3 v0.1.2 (/build/source/crates/spynso3)
  429. 262.06 s [gammaloop-workspace-clippy] error: method `reinterpret_loop_momenta_and_compute_prefactor` is never used
  430. 262.06 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:2681:19
  431. 262.06 s [gammaloop-workspace-clippy] |
  432. 262.06 s [gammaloop-workspace-clippy] 2144 | impl LmbMultiChannelingSetup {
  433. 262.06 s [gammaloop-workspace-clippy] | ---------------------------- method in this implementation
  434. 262.06 s [gammaloop-workspace-clippy] ...
  435. 262.06 s [gammaloop-workspace-clippy] 2681 | pub(crate) fn reinterpret_loop_momenta_and_compute_prefactor<T: FloatLike>(
  436. 262.06 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  437. 262.06 s [gammaloop-workspace-clippy] |
  438. 262.06 s [gammaloop-workspace-clippy] = note: `-D dead-code` implied by `-D warnings`
  439. 262.06 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[expect(dead_code)]` or `#[allow(dead_code)]`
  440. 262.06 s [gammaloop-workspace-clippy]
  441. 263.68 s [gammaloop-workspace-clippy] error: manual implementation of an assign operation
  442. 263.68 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/gammaloop_sample.rs:812:21
  443. 263.68 s [gammaloop-workspace-clippy] |
  444. 263.68 s [gammaloop-workspace-clippy] 812 | sample.sample.jacobian = sample.sample.jacobian * F::from_f64(partition_weight);
  445. 263.68 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace it with: `sample.sample.jacobian *= F::from_f64(partition_weight)`
  446. 263.68 s [gammaloop-workspace-clippy] |
  447. 263.68 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#assign_op_pattern
  448. 263.68 s [gammaloop-workspace-clippy] = note: `-D clippy::assign-op-pattern` implied by `-D warnings`
  449. 263.68 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::assign_op_pattern)]`
  450. 263.68 s [gammaloop-workspace-clippy]
  451. 263.83 s [gammaloop-workspace-clippy] error: doc list item without indentation
  452. 263.83 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:311:5
  453. 263.83 s [gammaloop-workspace-clippy] |
  454. 263.83 s [gammaloop-workspace-clippy] 311 | /// a selected LMB into a parent frame; graph code supplies the matrix and
  455. 263.83 s [gammaloop-workspace-clippy] | ^
  456. 263.83 s [gammaloop-workspace-clippy] |
  457. 263.83 s [gammaloop-workspace-clippy] = help: if this is supposed to be its own paragraph, add a blank line
  458. 263.83 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#doc_lazy_continuation
  459. 263.83 s [gammaloop-workspace-clippy] = note: `-D clippy::doc-lazy-continuation` implied by `-D warnings`
  460. 263.83 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::doc_lazy_continuation)]`
  461. 263.83 s [gammaloop-workspace-clippy] help: indent this line
  462. 263.83 s [gammaloop-workspace-clippy] |
  463. 263.83 s [gammaloop-workspace-clippy] 311 | /// a selected LMB into a parent frame; graph code supplies the matrix and
  464. 263.83 s [gammaloop-workspace-clippy] | ++
  465. 263.83 s [gammaloop-workspace-clippy]
  466. 263.83 s [gammaloop-workspace-clippy] error: doc list item without indentation
  467. 263.83 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:312:5
  468. 263.83 s [gammaloop-workspace-clippy] |
  469. 263.83 s [gammaloop-workspace-clippy] 312 | /// translation after resolving the relevant edge signatures and external data.
  470. 263.83 s [gammaloop-workspace-clippy] | ^
  471. 263.83 s [gammaloop-workspace-clippy] |
  472. 263.83 s [gammaloop-workspace-clippy] = help: if this is supposed to be its own paragraph, add a blank line
  473. 263.83 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#doc_lazy_continuation
  474. 263.83 s [gammaloop-workspace-clippy] help: indent this line
  475. 263.83 s [gammaloop-workspace-clippy] |
  476. 263.83 s [gammaloop-workspace-clippy] 312 | /// translation after resolving the relevant edge signatures and external data.
  477. 263.83 s [gammaloop-workspace-clippy] | ++
  478. 263.83 s [gammaloop-workspace-clippy]
  479. 263.83 s [gammaloop-workspace-clippy] error: the loop variable `column` is only used to index `augmented`
  480. 263.83 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:404:31
  481. 263.83 s [gammaloop-workspace-clippy] |
  482. 263.83 s [gammaloop-workspace-clippy] 404 | for column in 0..2 * dimension {
  483. 263.83 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^
  484. 263.83 s [gammaloop-workspace-clippy] |
  485. 263.83 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#needless_range_loop
  486. 263.83 s [gammaloop-workspace-clippy] = note: `-D clippy::needless-range-loop` implied by `-D warnings`
  487. 263.83 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::needless_range_loop)]`
  488. 263.83 s [gammaloop-workspace-clippy] help: consider using an iterator
  489. 263.83 s [gammaloop-workspace-clippy] |
  490. 263.83 s [gammaloop-workspace-clippy] 404 - for column in 0..2 * dimension {
  491. 263.83 s [gammaloop-workspace-clippy] 404 + for <item> in augmented.iter_mut().take(2 * dimension) {
  492. 263.83 s [gammaloop-workspace-clippy] |
  493. 263.83 s [gammaloop-workspace-clippy]
  494. 263.88 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  495. 263.88 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:1915:9
  496. 263.88 s [gammaloop-workspace-clippy] |
  497. 263.88 s [gammaloop-workspace-clippy] 1915 | / if let SamplingMapDefinition::Lmb(edges) = &definition {
  498. 263.88 s [gammaloop-workspace-clippy] 1916 | | if edges.len() != n_loop_momenta {
  499. 263.88 s [gammaloop-workspace-clippy] 1917 | | return Err(eyre!(
  500. 263.88 s [gammaloop-workspace-clippy] 1918 | | "lmb definition has {} edges, but the kernel has {} loop coordinates",
  501. 263.88 s [gammaloop-workspace-clippy] ... |
  502. 263.88 s [gammaloop-workspace-clippy] 1923 | | }
  503. 263.88 s [gammaloop-workspace-clippy] | |_________^
  504. 263.88 s [gammaloop-workspace-clippy] |
  505. 263.88 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  506. 263.88 s [gammaloop-workspace-clippy] = note: `-D clippy::collapsible-if` implied by `-D warnings`
  507. 263.88 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::collapsible_if)]`
  508. 263.88 s [gammaloop-workspace-clippy] help: collapse nested if block
  509. 263.88 s [gammaloop-workspace-clippy] |
  510. 263.88 s [gammaloop-workspace-clippy] 1915 ~ if let SamplingMapDefinition::Lmb(edges) = &definition
  511. 263.88 s [gammaloop-workspace-clippy] 1916 ~ && edges.len() != n_loop_momenta {
  512. 263.88 s [gammaloop-workspace-clippy] 1917 | return Err(eyre!(
  513. 263.88 s [gammaloop-workspace-clippy] ...
  514. 263.88 s [gammaloop-workspace-clippy] 1921 | ));
  515. 263.88 s [gammaloop-workspace-clippy] 1922 ~ }
  516. 263.88 s [gammaloop-workspace-clippy] |
  517. 263.88 s [gammaloop-workspace-clippy]
  518. 263.90 s [gammaloop-workspace-clippy] error: manual implementation of `.is_multiple_of()`
  519. 263.90 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_reference.rs:135:12
  520. 263.90 s [gammaloop-workspace-clippy] |
  521. 263.90 s [gammaloop-workspace-clippy] 135 | if center.len() % 3 != 0 {
  522. 263.90 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^ help: replace with: `!center.len().is_multiple_of(3)`
  523. 263.90 s [gammaloop-workspace-clippy] |
  524. 263.90 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#manual_is_multiple_of
  525. 263.90 s [gammaloop-workspace-clippy] = note: `-D clippy::manual-is-multiple-of` implied by `-D warnings`
  526. 263.90 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::manual_is_multiple_of)]`
  527. 263.90 s [gammaloop-workspace-clippy]
  528. 263.95 s [gammaloop-workspace-clippy] error: manual implementation of `.is_multiple_of()`
  529. 263.95 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1024:47
  530. 263.95 s [gammaloop-workspace-clippy] |
  531. 263.95 s [gammaloop-workspace-clippy] 1024 | if self.raw_coordinates.is_empty() || self.raw_coordinates.len() % 3 != 0 {
  532. 263.95 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `!self.raw_coordinates.len().is_multiple_of(3)`
  533. 263.95 s [gammaloop-workspace-clippy] |
  534. 263.95 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#manual_is_multiple_of
  535. 263.95 s [gammaloop-workspace-clippy]
  536. 263.97 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  537. 263.97 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1565:5
  538. 263.97 s [gammaloop-workspace-clippy] |
  539. 263.97 s [gammaloop-workspace-clippy] 1565 | / if let Some(graph_id) = context.graph_id {
  540. 263.97 s [gammaloop-workspace-clippy] 1566 | | if graph_id != prepared.graph_id {
  541. 263.97 s [gammaloop-workspace-clippy] 1567 | | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  542. 263.97 s [gammaloop-workspace-clippy] 1568 | | channel: channel.to_owned(),
  543. 263.97 s [gammaloop-workspace-clippy] ... |
  544. 263.97 s [gammaloop-workspace-clippy] 1575 | | }
  545. 263.97 s [gammaloop-workspace-clippy] | |_____^
  546. 263.97 s [gammaloop-workspace-clippy] |
  547. 263.97 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  548. 263.97 s [gammaloop-workspace-clippy] help: collapse nested if block
  549. 263.97 s [gammaloop-workspace-clippy] |
  550. 263.97 s [gammaloop-workspace-clippy] 1565 ~ if let Some(graph_id) = context.graph_id
  551. 263.97 s [gammaloop-workspace-clippy] 1566 ~ && graph_id != prepared.graph_id {
  552. 263.97 s [gammaloop-workspace-clippy] 1567 | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  553. 263.97 s [gammaloop-workspace-clippy] ...
  554. 263.97 s [gammaloop-workspace-clippy] 1573 | });
  555. 263.97 s [gammaloop-workspace-clippy] 1574 ~ }
  556. 263.97 s [gammaloop-workspace-clippy] |
  557. 263.97 s [gammaloop-workspace-clippy]
  558. 263.97 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  559. 263.97 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1585:5
  560. 263.97 s [gammaloop-workspace-clippy] |
  561. 263.97 s [gammaloop-workspace-clippy] 1585 | / if let Some(cut_id) = context.cut_id {
  562. 263.97 s [gammaloop-workspace-clippy] 1586 | | if cut_id != prepared.cut_id {
  563. 263.97 s [gammaloop-workspace-clippy] 1587 | | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  564. 263.97 s [gammaloop-workspace-clippy] 1588 | | channel: channel.to_owned(),
  565. 263.97 s [gammaloop-workspace-clippy] ... |
  566. 263.97 s [gammaloop-workspace-clippy] 1595 | | }
  567. 263.97 s [gammaloop-workspace-clippy] | |_____^
  568. 263.97 s [gammaloop-workspace-clippy] |
  569. 263.97 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  570. 263.97 s [gammaloop-workspace-clippy] help: collapse nested if block
  571. 263.97 s [gammaloop-workspace-clippy] |
  572. 263.97 s [gammaloop-workspace-clippy] 1585 ~ if let Some(cut_id) = context.cut_id
  573. 263.97 s [gammaloop-workspace-clippy] 1586 ~ && cut_id != prepared.cut_id {
  574. 263.97 s [gammaloop-workspace-clippy] 1587 | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  575. 263.97 s [gammaloop-workspace-clippy] ...
  576. 263.97 s [gammaloop-workspace-clippy] 1593 | });
  577. 263.97 s [gammaloop-workspace-clippy] 1594 ~ }
  578. 263.97 s [gammaloop-workspace-clippy] |
  579. 263.97 s [gammaloop-workspace-clippy]
  580. 263.98 s [gammaloop-workspace-clippy] error: very complex type used. Consider factoring parts into `type` definitions
  581. 263.98 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1894:6
  582. 263.98 s [gammaloop-workspace-clippy] |
  583. 263.98 s [gammaloop-workspace-clippy] 1894 | ) -> Result<
  584. 263.98 s [gammaloop-workspace-clippy] | ______^
  585. 263.98 s [gammaloop-workspace-clippy] 1895 | | (
  586. 263.98 s [gammaloop-workspace-clippy] 1896 | | Vec<Box<dyn SamplingMapComponent>>,
  587. 263.98 s [gammaloop-workspace-clippy] 1897 | | Vec<Vec<usize>>,
  588. 263.98 s [gammaloop-workspace-clippy] ... |
  589. 263.98 s [gammaloop-workspace-clippy] 1900 | | SamplingChannelCompileError,
  590. 263.98 s [gammaloop-workspace-clippy] 1901 | | > {
  591. 263.98 s [gammaloop-workspace-clippy] | |_^
  592. 263.98 s [gammaloop-workspace-clippy] |
  593. 263.98 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#type_complexity
  594. 263.98 s [gammaloop-workspace-clippy] = note: `-D clippy::type-complexity` implied by `-D warnings`
  595. 263.98 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::type_complexity)]`
  596. 263.98 s [gammaloop-workspace-clippy]
  597. 264.00 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  598. 264.00 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2575:13
  599. 264.00 s [gammaloop-workspace-clippy] |
  600. 264.00 s [gammaloop-workspace-clippy] 2575 | / if let SamplingChannelSelector::Named(name) = selector {
  601. 264.00 s [gammaloop-workspace-clippy] 2576 | | if let Some(channel) = resolved.named(name) {
  602. 264.00 s [gammaloop-workspace-clippy] 2577 | | let entry = SamplingCatalogueEntry::Named(channel.clone());
  603. 264.00 s [gammaloop-workspace-clippy] 2578 | | if !entries.contains(&entry) {
  604. 264.00 s [gammaloop-workspace-clippy] ... |
  605. 264.00 s [gammaloop-workspace-clippy] 2582 | | }
  606. 264.00 s [gammaloop-workspace-clippy] | |_____________^
  607. 264.00 s [gammaloop-workspace-clippy] |
  608. 264.00 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  609. 264.00 s [gammaloop-workspace-clippy] help: collapse nested if block
  610. 264.00 s [gammaloop-workspace-clippy] |
  611. 264.00 s [gammaloop-workspace-clippy] 2575 ~ if let SamplingChannelSelector::Named(name) = selector
  612. 264.00 s [gammaloop-workspace-clippy] 2576 ~ && let Some(channel) = resolved.named(name) {
  613. 264.00 s [gammaloop-workspace-clippy] 2577 | let entry = SamplingCatalogueEntry::Named(channel.clone());
  614. 264.00 s [gammaloop-workspace-clippy] ...
  615. 264.00 s [gammaloop-workspace-clippy] 2580 | }
  616. 264.00 s [gammaloop-workspace-clippy] 2581 ~ }
  617. 264.00 s [gammaloop-workspace-clippy] |
  618. 264.00 s [gammaloop-workspace-clippy]
  619. 264.00 s [gammaloop-workspace-clippy] error: this `if` statement can be collapsed
  620. 264.00 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2600:13
  621. 264.00 s [gammaloop-workspace-clippy] |
  622. 264.00 s [gammaloop-workspace-clippy] 2600 | / if basis_ids.is_empty() && optimized_lmbs.is_empty() {
  623. 264.00 s [gammaloop-workspace-clippy] 2601 | | if let Some((basis_id, _)) = all_lmbs.first() {
  624. 264.00 s [gammaloop-workspace-clippy] 2602 | | basis_ids.push(*basis_id);
  625. 264.00 s [gammaloop-workspace-clippy] 2603 | | }
  626. 264.00 s [gammaloop-workspace-clippy] 2604 | | }
  627. 264.00 s [gammaloop-workspace-clippy] | |_____________^
  628. 264.00 s [gammaloop-workspace-clippy] |
  629. 264.00 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  630. 264.00 s [gammaloop-workspace-clippy] help: collapse nested if block
  631. 264.00 s [gammaloop-workspace-clippy] |
  632. 264.00 s [gammaloop-workspace-clippy] 2600 ~ if basis_ids.is_empty() && optimized_lmbs.is_empty()
  633. 264.00 s [gammaloop-workspace-clippy] 2601 ~ && let Some((basis_id, _)) = all_lmbs.first() {
  634. 264.00 s [gammaloop-workspace-clippy] 2602 | basis_ids.push(*basis_id);
  635. 264.00 s [gammaloop-workspace-clippy] 2603 ~ }
  636. 264.00 s [gammaloop-workspace-clippy] |
  637. 264.00 s [gammaloop-workspace-clippy]
  638. 264.12 s [gammaloop-workspace-clippy] error: using `clone` on type `Complex<F<f64>>` which implements the `Copy` trait
  639. 264.12 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:160:32
  640. 264.12 s [gammaloop-workspace-clippy] |
  641. 264.12 s [gammaloop-workspace-clippy] 160 | value: value.values[0].clone(),
  642. 264.12 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `value.values[0]`
  643. 264.12 s [gammaloop-workspace-clippy] |
  644. 264.12 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  645. 264.12 s [gammaloop-workspace-clippy] = note: `-D clippy::clone-on-copy` implied by `-D warnings`
  646. 264.12 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::clone_on_copy)]`
  647. 264.12 s [gammaloop-workspace-clippy]
  648. 264.13 s [gammaloop-workspace-clippy] error: the loop variable `column` is only used to index `work`
  649. 264.13 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:324:27
  650. 264.13 s [gammaloop-workspace-clippy] |
  651. 264.13 s [gammaloop-workspace-clippy] 324 | for column in (pivot + 1)..dimension {
  652. 264.13 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^
  653. 264.13 s [gammaloop-workspace-clippy] |
  654. 264.13 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#needless_range_loop
  655. 264.13 s [gammaloop-workspace-clippy] help: consider using an iterator
  656. 264.13 s [gammaloop-workspace-clippy] |
  657. 264.13 s [gammaloop-workspace-clippy] 324 - for column in (pivot + 1)..dimension {
  658. 264.13 s [gammaloop-workspace-clippy] 324 + for <item> in work.iter_mut().take(dimension).skip((pivot + 1)) {
  659. 264.13 s [gammaloop-workspace-clippy] |
  660. 264.13 s [gammaloop-workspace-clippy]
  661. 264.41 s [gammaloop-workspace-clippy] error: manual implementation of an assign operation
  662. 264.41 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:3632:29
  663. 264.41 s [gammaloop-workspace-clippy] |
  664. 264.41 s [gammaloop-workspace-clippy] 3632 | / ... mapped_sample.sample.jacobian = mapped_sample.sample.jacobian
  665. 264.41 s [gammaloop-workspace-clippy] 3633 | | ... * F::from_f64(partition_weight * channel_count);
  666. 264.41 s [gammaloop-workspace-clippy] | |_________________________________________________________________________^ help: replace it with: `mapped_sample.sample.jacobian *= F::from_f64(partition_weight * channel_count)`
  667. 264.41 s [gammaloop-workspace-clippy] |
  668. 264.41 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#assign_op_pattern
  669. 264.41 s [gammaloop-workspace-clippy]
  670. 264.43 s [gammaloop-workspace-clippy] error: manual implementation of an assign operation
  671. 264.43 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:4207:33
  672. 264.43 s [gammaloop-workspace-clippy] |
  673. 264.43 s [gammaloop-workspace-clippy] 4207 | / ... mapped_sample.sample.jacobian = mapped_sample.sample.jacobian
  674. 264.43 s [gammaloop-workspace-clippy] 4208 | | ... * F::from_f64(partition_weight * channel_count);
  675. 264.43 s [gammaloop-workspace-clippy] | |_________________________________________________________________________^ help: replace it with: `mapped_sample.sample.jacobian *= F::from_f64(partition_weight * channel_count)`
  676. 264.43 s [gammaloop-workspace-clippy] |
  677. 264.43 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#assign_op_pattern
  678. 264.43 s [gammaloop-workspace-clippy]
  679. 264.81 s [gammaloop-workspace-clippy] error: you seem to be trying to use `match` to destructure a single infallible pattern. Consider using `let`
  680. 264.81 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrate/mod.rs:3342:5
  681. 264.81 s [gammaloop-workspace-clippy] |
  682. 264.81 s [gammaloop-workspace-clippy] 3342 | / let process_integrand = match integrand {
  683. 264.81 s [gammaloop-workspace-clippy] 3343 | | Integrand::ProcessIntegrand(process_integrand) => process_integrand,
  684. 264.81 s [gammaloop-workspace-clippy] 3344 | | #[cfg(test)]
  685. 264.81 s [gammaloop-workspace-clippy] 3345 | | Integrand::TestProbe(_) => return Vec::new(),
  686. 264.81 s [gammaloop-workspace-clippy] 3346 | | };
  687. 264.81 s [gammaloop-workspace-clippy] | |______^ help: try: `let Integrand::ProcessIntegrand(process_integrand) = integrand;`
  688. 264.81 s [gammaloop-workspace-clippy] |
  689. 264.81 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#infallible_destructuring_match
  690. 264.81 s [gammaloop-workspace-clippy] = note: `-D clippy::infallible-destructuring-match` implied by `-D warnings`
  691. 264.81 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::infallible_destructuring_match)]`
  692. 264.81 s [gammaloop-workspace-clippy]
  693. 264.81 s [gammaloop-workspace-clippy] error: you seem to be trying to use `match` to destructure a single infallible pattern. Consider using `let`
  694. 264.81 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrate/mod.rs:3359:5
  695. 264.81 s [gammaloop-workspace-clippy] |
  696. 264.81 s [gammaloop-workspace-clippy] 3359 | / let process_integrand = match integrand {
  697. 264.81 s [gammaloop-workspace-clippy] 3360 | | Integrand::ProcessIntegrand(process_integrand) => process_integrand,
  698. 264.81 s [gammaloop-workspace-clippy] 3361 | | #[cfg(test)]
  699. 264.81 s [gammaloop-workspace-clippy] 3362 | | Integrand::TestProbe(_) => return false,
  700. 264.81 s [gammaloop-workspace-clippy] 3363 | | };
  701. 264.81 s [gammaloop-workspace-clippy] | |______^ help: try: `let Integrand::ProcessIntegrand(process_integrand) = integrand;`
  702. 264.81 s [gammaloop-workspace-clippy] |
  703. 264.81 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#infallible_destructuring_match
  704. 264.81 s [gammaloop-workspace-clippy]
  705. 267.25 s [gammaloop-workspace-clippy] error: this `impl` can be derived
  706. 267.25 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/settings/runtime.rs:1259:1
  707. 267.25 s [gammaloop-workspace-clippy] |
  708. 267.25 s [gammaloop-workspace-clippy] 1259 | / impl Default for SamplingChannelDefinition {
  709. 267.25 s [gammaloop-workspace-clippy] 1260 | | fn default() -> Self {
  710. 267.25 s [gammaloop-workspace-clippy] 1261 | | Self {
  711. 267.25 s [gammaloop-workspace-clippy] 1262 | | around: String::new(),
  712. 267.25 s [gammaloop-workspace-clippy] ... |
  713. 267.25 s [gammaloop-workspace-clippy] 1268 | | }
  714. 267.25 s [gammaloop-workspace-clippy] | |_^
  715. 267.25 s [gammaloop-workspace-clippy] |
  716. 267.25 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#derivable_impls
  717. 267.25 s [gammaloop-workspace-clippy] = note: `-D clippy::derivable-impls` implied by `-D warnings`
  718. 267.25 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::derivable_impls)]`
  719. 267.25 s [gammaloop-workspace-clippy] help: replace the manual implementation with a derive attribute
  720. 267.25 s [gammaloop-workspace-clippy] |
  721. 267.25 s [gammaloop-workspace-clippy] 1249 + #[derive(Default)]
  722. 267.25 s [gammaloop-workspace-clippy] 1250 | pub struct SamplingChannelDefinition {
  723. 267.25 s [gammaloop-workspace-clippy] |
  724. 267.25 s [gammaloop-workspace-clippy]
  725. 267.26 s [gammaloop-workspace-clippy] error: this `impl` can be derived
  726. 267.26 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/settings/runtime.rs:1285:1
  727. 267.26 s [gammaloop-workspace-clippy] |
  728. 267.26 s [gammaloop-workspace-clippy] 1285 | / impl Default for SamplingChannelSelection {
  729. 267.26 s [gammaloop-workspace-clippy] 1286 | | fn default() -> Self {
  730. 267.26 s [gammaloop-workspace-clippy] 1287 | | Self {
  731. 267.26 s [gammaloop-workspace-clippy] 1288 | | weight: SamplingChannelWeight::default(),
  732. 267.26 s [gammaloop-workspace-clippy] ... |
  733. 267.26 s [gammaloop-workspace-clippy] 1294 | | }
  734. 267.26 s [gammaloop-workspace-clippy] | |_^
  735. 267.26 s [gammaloop-workspace-clippy] |
  736. 267.26 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#derivable_impls
  737. 267.26 s [gammaloop-workspace-clippy] help: replace the manual implementation with a derive attribute
  738. 267.26 s [gammaloop-workspace-clippy] |
  739. 267.26 s [gammaloop-workspace-clippy] 1277 + #[derive(Default)]
  740. 267.26 s [gammaloop-workspace-clippy] 1278 | pub struct SamplingChannelSelection {
  741. 267.26 s [gammaloop-workspace-clippy] |
  742. 267.26 s [gammaloop-workspace-clippy]
  743. 269.80 s [gammaloop-workspace-clippy] error: could not compile `gammalooprs` (lib) due to 21 previous errors
  744. 269.80 s [gammaloop-workspace-clippy] warning: build failed, waiting for other jobs to finish...
  745. 272.42 s [gammaloop-workspace-clippy] error: using `clone` on type `F<f64>` which implements the `Copy` trait
  746. 272.42 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:2358:14
  747. 272.42 s [gammaloop-workspace-clippy] |
  748. 272.42 s [gammaloop-workspace-clippy] 2358 | (point.jacobian.clone() * point.inverse_jacobian.clone() - F(1.0)).abs() < F(1.0e-12)
  749. 272.42 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `point.jacobian`
  750. 272.42 s [gammaloop-workspace-clippy] |
  751. 272.42 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  752. 272.42 s [gammaloop-workspace-clippy] = note: `-D clippy::clone-on-copy` implied by `-D warnings`
  753. 272.42 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::clone_on_copy)]`
  754. 272.42 s [gammaloop-workspace-clippy]
  755. 272.42 s [gammaloop-workspace-clippy] error: using `clone` on type `F<f64>` which implements the `Copy` trait
  756. 272.42 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:2358:39
  757. 272.42 s [gammaloop-workspace-clippy] |
  758. 272.42 s [gammaloop-workspace-clippy] 2358 | (point.jacobian.clone() * point.inverse_jacobian.clone() - F(1.0)).abs() < F(1.0e-12)
  759. 272.42 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `point.inverse_jacobian`
  760. 272.42 s [gammaloop-workspace-clippy] |
  761. 272.42 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  762. 272.42 s [gammaloop-workspace-clippy]
  763. 272.59 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  764. 272.59 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3051:9
  765. 272.59 s [gammaloop-workspace-clippy] |
  766. 272.59 s [gammaloop-workspace-clippy] 3051 | selection.default_channel_selection = vec!["ordinary".into()];
  767. 272.59 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  768. 272.59 s [gammaloop-workspace-clippy] |
  769. 272.59 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["ordinary".into()], ..Default::default() }` and removing relevant reassignments
  770. 272.59 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3050:9
  771. 272.59 s [gammaloop-workspace-clippy] |
  772. 272.59 s [gammaloop-workspace-clippy] 3050 | let mut selection = SamplingChannelSelection::default();
  773. 272.59 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  774. 272.59 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  775. 272.59 s [gammaloop-workspace-clippy] = note: `-D clippy::field-reassign-with-default` implied by `-D warnings`
  776. 272.59 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::field_reassign_with_default)]`
  777. 272.59 s [gammaloop-workspace-clippy]
  778. 272.59 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  779. 272.59 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3188:9
  780. 272.59 s [gammaloop-workspace-clippy] |
  781. 272.59 s [gammaloop-workspace-clippy] 3188 | selection.default_channel_selection = vec!["missing".into()];
  782. 272.59 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  783. 272.59 s [gammaloop-workspace-clippy] |
  784. 272.59 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["missing".into()], ..Default::default() }` and removing relevant reassignments
  785. 272.59 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3187:9
  786. 272.59 s [gammaloop-workspace-clippy] |
  787. 272.59 s [gammaloop-workspace-clippy] 3187 | let mut selection = SamplingChannelSelection::default();
  788. 272.59 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  789. 272.59 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  790. 272.59 s [gammaloop-workspace-clippy]
  791. 272.59 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  792. 272.59 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3208:9
  793. 272.59 s [gammaloop-workspace-clippy] |
  794. 272.59 s [gammaloop-workspace-clippy] 3208 | selection.default_channel_selection = vec!["named".into()];
  795. 272.59 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  796. 272.59 s [gammaloop-workspace-clippy] |
  797. 272.59 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["named".into()], ..Default::default() }` and removing relevant reassignments
  798. 272.59 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3207:9
  799. 272.59 s [gammaloop-workspace-clippy] |
  800. 272.59 s [gammaloop-workspace-clippy] 3207 | let mut selection = SamplingChannelSelection::default();
  801. 272.59 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  802. 272.59 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  803. 272.59 s [gammaloop-workspace-clippy]
  804. 272.60 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  805. 272.60 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3231:9
  806. 272.60 s [gammaloop-workspace-clippy] |
  807. 272.60 s [gammaloop-workspace-clippy] 3231 | selection.default_channel_selection = vec!["threshold".into()];
  808. 272.60 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  809. 272.60 s [gammaloop-workspace-clippy] |
  810. 272.60 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  811. 272.60 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3230:9
  812. 272.60 s [gammaloop-workspace-clippy] |
  813. 272.60 s [gammaloop-workspace-clippy] 3230 | let mut selection = SamplingChannelSelection::default();
  814. 272.60 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  815. 272.60 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  816. 272.60 s [gammaloop-workspace-clippy]
  817. 272.60 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  818. 272.60 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3283:9
  819. 272.60 s [gammaloop-workspace-clippy] |
  820. 272.60 s [gammaloop-workspace-clippy] 3283 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  821. 272.60 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  822. 272.60 s [gammaloop-workspace-clippy] |
  823. 272.60 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  824. 272.60 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3282:9
  825. 272.60 s [gammaloop-workspace-clippy] |
  826. 272.60 s [gammaloop-workspace-clippy] 3282 | let mut selection = SamplingChannelSelection::default();
  827. 272.60 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  828. 272.60 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  829. 272.60 s [gammaloop-workspace-clippy]
  830. 272.60 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  831. 272.60 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3300:9
  832. 272.60 s [gammaloop-workspace-clippy] |
  833. 272.60 s [gammaloop-workspace-clippy] 3300 | selection.default_channel_selection = vec!["auto:surfaces".into(), "auto:lmb".into()];
  834. 272.60 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  835. 272.60 s [gammaloop-workspace-clippy] |
  836. 272.60 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:surfaces".into(), "auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  837. 272.60 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3299:9
  838. 272.60 s [gammaloop-workspace-clippy] |
  839. 272.60 s [gammaloop-workspace-clippy] 3299 | let mut selection = SamplingChannelSelection::default();
  840. 272.60 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  841. 272.60 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  842. 272.60 s [gammaloop-workspace-clippy]
  843. 272.60 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  844. 272.60 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3310:9
  845. 272.60 s [gammaloop-workspace-clippy] |
  846. 272.60 s [gammaloop-workspace-clippy] 3310 | selection.default_channel_selection = vec!["auto:surfaces".into()];
  847. 272.60 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  848. 272.60 s [gammaloop-workspace-clippy] |
  849. 272.60 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:surfaces".into()], ..Default::default() }` and removing relevant reassignments
  850. 272.60 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3309:9
  851. 272.60 s [gammaloop-workspace-clippy] |
  852. 272.60 s [gammaloop-workspace-clippy] 3309 | let mut selection = SamplingChannelSelection::default();
  853. 272.60 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  854. 272.60 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  855. 272.60 s [gammaloop-workspace-clippy]
  856. 272.60 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  857. 272.60 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3331:13
  858. 272.60 s [gammaloop-workspace-clippy] |
  859. 272.60 s [gammaloop-workspace-clippy] 3331 | selection.default_channel_selection = vec![preset.into()];
  860. 272.60 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  861. 272.60 s [gammaloop-workspace-clippy] |
  862. 272.60 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec![preset.into()], ..Default::default() }` and removing relevant reassignments
  863. 272.60 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3330:13
  864. 272.60 s [gammaloop-workspace-clippy] |
  865. 272.60 s [gammaloop-workspace-clippy] 3330 | let mut selection = SamplingChannelSelection::default();
  866. 272.60 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  867. 272.60 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  868. 272.60 s [gammaloop-workspace-clippy]
  869. 272.60 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  870. 272.60 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3362:9
  871. 272.60 s [gammaloop-workspace-clippy] |
  872. 272.60 s [gammaloop-workspace-clippy] 3362 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  873. 272.60 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  874. 272.60 s [gammaloop-workspace-clippy] |
  875. 272.60 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  876. 272.60 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3361:9
  877. 272.60 s [gammaloop-workspace-clippy] |
  878. 272.60 s [gammaloop-workspace-clippy] 3361 | let mut selection = SamplingChannelSelection::default();
  879. 272.60 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  880. 272.60 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  881. 272.60 s [gammaloop-workspace-clippy]
  882. 272.61 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  883. 272.61 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3444:13
  884. 272.61 s [gammaloop-workspace-clippy] |
  885. 272.61 s [gammaloop-workspace-clippy] 3444 | selection.default_channel_selection = vec![name.to_owned()];
  886. 272.61 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  887. 272.61 s [gammaloop-workspace-clippy] |
  888. 272.61 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec![name.to_owned()], ..Default::default() }` and removing relevant reassignments
  889. 272.61 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3443:13
  890. 272.61 s [gammaloop-workspace-clippy] |
  891. 272.61 s [gammaloop-workspace-clippy] 3443 | let mut selection = SamplingChannelSelection::default();
  892. 272.61 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  893. 272.61 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  894. 272.61 s [gammaloop-workspace-clippy]
  895. 272.61 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  896. 272.61 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3478:9
  897. 272.61 s [gammaloop-workspace-clippy] |
  898. 272.61 s [gammaloop-workspace-clippy] 3478 | selection.default_channel_selection = vec!["threshold".into()];
  899. 272.61 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  900. 272.61 s [gammaloop-workspace-clippy] |
  901. 272.61 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  902. 272.61 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3477:9
  903. 272.61 s [gammaloop-workspace-clippy] |
  904. 272.61 s [gammaloop-workspace-clippy] 3477 | let mut selection = SamplingChannelSelection::default();
  905. 272.61 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  906. 272.61 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  907. 272.61 s [gammaloop-workspace-clippy]
  908. 272.61 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  909. 272.61 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3523:9
  910. 272.61 s [gammaloop-workspace-clippy] |
  911. 272.61 s [gammaloop-workspace-clippy] 3523 | selection.default_channel_selection = vec!["conditional".into()];
  912. 272.61 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  913. 272.61 s [gammaloop-workspace-clippy] |
  914. 272.61 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["conditional".into()], ..Default::default() }` and removing relevant reassignments
  915. 272.61 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3522:9
  916. 272.61 s [gammaloop-workspace-clippy] |
  917. 272.61 s [gammaloop-workspace-clippy] 3522 | let mut selection = SamplingChannelSelection::default();
  918. 272.61 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  919. 272.61 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  920. 272.61 s [gammaloop-workspace-clippy]
  921. 272.61 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  922. 272.61 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3585:9
  923. 272.61 s [gammaloop-workspace-clippy] |
  924. 272.61 s [gammaloop-workspace-clippy] 3585 | selection.default_channel_selection = vec!["left_chart".into(), "right_chart".into()];
  925. 272.61 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  926. 272.61 s [gammaloop-workspace-clippy] |
  927. 272.61 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["left_chart".into(), "right_chart".into()], ..Default::default() }` and removing relevant reassignments
  928. 272.61 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3584:9
  929. 272.61 s [gammaloop-workspace-clippy] |
  930. 272.61 s [gammaloop-workspace-clippy] 3584 | let mut selection = SamplingChannelSelection::default();
  931. 272.61 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  932. 272.61 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  933. 272.61 s [gammaloop-workspace-clippy]
  934. 272.62 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  935. 272.62 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3653:9
  936. 272.62 s [gammaloop-workspace-clippy] |
  937. 272.62 s [gammaloop-workspace-clippy] 3653 | selection.default_channel_selection = vec!["h".into(), "z".into()];
  938. 272.62 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  939. 272.62 s [gammaloop-workspace-clippy] |
  940. 272.62 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["h".into(), "z".into()], ..Default::default() }` and removing relevant reassignments
  941. 272.62 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3652:9
  942. 272.62 s [gammaloop-workspace-clippy] |
  943. 272.62 s [gammaloop-workspace-clippy] 3652 | let mut selection = SamplingChannelSelection::default();
  944. 272.62 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  945. 272.62 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  946. 272.62 s [gammaloop-workspace-clippy]
  947. 272.62 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  948. 272.62 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3697:9
  949. 272.62 s [gammaloop-workspace-clippy] |
  950. 272.62 s [gammaloop-workspace-clippy] 3697 | selection.default_channel_selection = vec!["auto:lmb".into()];
  951. 272.62 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  952. 272.62 s [gammaloop-workspace-clippy] |
  953. 272.62 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  954. 272.62 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3696:9
  955. 272.62 s [gammaloop-workspace-clippy] |
  956. 272.62 s [gammaloop-workspace-clippy] 3696 | let mut selection = SamplingChannelSelection::default();
  957. 272.62 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  958. 272.62 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  959. 272.62 s [gammaloop-workspace-clippy]
  960. 272.62 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  961. 272.62 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3719:9
  962. 272.62 s [gammaloop-workspace-clippy] |
  963. 272.62 s [gammaloop-workspace-clippy] 3719 | selection.default_channel_selection = vec!["auto:lmb".into()];
  964. 272.62 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  965. 272.62 s [gammaloop-workspace-clippy] |
  966. 272.62 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  967. 272.62 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3718:9
  968. 272.62 s [gammaloop-workspace-clippy] |
  969. 272.62 s [gammaloop-workspace-clippy] 3718 | let mut selection = SamplingChannelSelection::default();
  970. 272.62 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  971. 272.62 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  972. 272.62 s [gammaloop-workspace-clippy]
  973. 272.63 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  974. 272.63 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3771:9
  975. 272.63 s [gammaloop-workspace-clippy] |
  976. 272.63 s [gammaloop-workspace-clippy] 3771 | selection.default_channel_selection = vec!["named".into()];
  977. 272.63 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  978. 272.63 s [gammaloop-workspace-clippy] |
  979. 272.63 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["named".into()], ..Default::default() }` and removing relevant reassignments
  980. 272.63 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3770:9
  981. 272.63 s [gammaloop-workspace-clippy] |
  982. 272.63 s [gammaloop-workspace-clippy] 3770 | let mut selection = SamplingChannelSelection::default();
  983. 272.63 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  984. 272.63 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  985. 272.63 s [gammaloop-workspace-clippy]
  986. 272.63 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  987. 272.63 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3820:9
  988. 272.63 s [gammaloop-workspace-clippy] |
  989. 272.63 s [gammaloop-workspace-clippy] 3820 | selection.default_channel_selection = vec!["threshold".into()];
  990. 272.63 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  991. 272.63 s [gammaloop-workspace-clippy] |
  992. 272.63 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  993. 272.63 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3819:9
  994. 272.63 s [gammaloop-workspace-clippy] |
  995. 272.63 s [gammaloop-workspace-clippy] 3819 | let mut selection = SamplingChannelSelection::default();
  996. 272.63 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  997. 272.63 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  998. 272.63 s [gammaloop-workspace-clippy]
  999. 272.63 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1000. 272.63 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3867:9
  1001. 272.63 s [gammaloop-workspace-clippy] |
  1002. 272.63 s [gammaloop-workspace-clippy] 3867 | selection.default_channel_selection = vec!["cut_channel".into()];
  1003. 272.63 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1004. 272.63 s [gammaloop-workspace-clippy] |
  1005. 272.63 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_channel".into()], ..Default::default() }` and removing relevant reassignments
  1006. 272.63 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3866:9
  1007. 272.63 s [gammaloop-workspace-clippy] |
  1008. 272.63 s [gammaloop-workspace-clippy] 3866 | let mut selection = SamplingChannelSelection::default();
  1009. 272.63 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1010. 272.63 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1011. 272.63 s [gammaloop-workspace-clippy]
  1012. 272.63 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1013. 272.63 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3897:9
  1014. 272.63 s [gammaloop-workspace-clippy] |
  1015. 272.63 s [gammaloop-workspace-clippy] 3897 | selection.default_channel_selection = vec!["right_channel".into()];
  1016. 272.63 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1017. 272.63 s [gammaloop-workspace-clippy] |
  1018. 272.63 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["right_channel".into()], ..Default::default() }` and removing relevant reassignments
  1019. 272.63 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3896:9
  1020. 272.63 s [gammaloop-workspace-clippy] |
  1021. 272.63 s [gammaloop-workspace-clippy] 3896 | let mut selection = SamplingChannelSelection::default();
  1022. 272.63 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1023. 272.63 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1024. 272.63 s [gammaloop-workspace-clippy]
  1025. 272.63 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1026. 272.63 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3924:9
  1027. 272.63 s [gammaloop-workspace-clippy] |
  1028. 272.63 s [gammaloop-workspace-clippy] 3924 | selection.default_channel_selection = vec!["cut_chart".into()];
  1029. 272.63 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1030. 272.63 s [gammaloop-workspace-clippy] |
  1031. 272.63 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_chart".into()], ..Default::default() }` and removing relevant reassignments
  1032. 272.63 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3923:9
  1033. 272.63 s [gammaloop-workspace-clippy] |
  1034. 272.63 s [gammaloop-workspace-clippy] 3923 | let mut selection = SamplingChannelSelection::default();
  1035. 272.63 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1036. 272.63 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1037. 272.63 s [gammaloop-workspace-clippy]
  1038. 272.63 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1039. 272.63 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3959:13
  1040. 272.63 s [gammaloop-workspace-clippy] |
  1041. 272.63 s [gammaloop-workspace-clippy] 3959 | selection.default_channel_selection = vec![name.to_owned()];
  1042. 272.63 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1043. 272.63 s [gammaloop-workspace-clippy] |
  1044. 272.63 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec![name.to_owned()], ..Default::default() }` and removing relevant reassignments
  1045. 272.63 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3958:13
  1046. 272.63 s [gammaloop-workspace-clippy] |
  1047. 272.63 s [gammaloop-workspace-clippy] 3958 | let mut selection = SamplingChannelSelection::default();
  1048. 272.63 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1049. 272.63 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1050. 272.63 s [gammaloop-workspace-clippy]
  1051. 272.63 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1052. 272.63 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3996:9
  1053. 272.63 s [gammaloop-workspace-clippy] |
  1054. 272.63 s [gammaloop-workspace-clippy] 3996 | selection.default_channel_selection = vec!["cut_chart".into()];
  1055. 272.63 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1056. 272.63 s [gammaloop-workspace-clippy] |
  1057. 272.63 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_chart".into()], ..Default::default() }` and removing relevant reassignments
  1058. 272.63 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3995:9
  1059. 272.63 s [gammaloop-workspace-clippy] |
  1060. 272.63 s [gammaloop-workspace-clippy] 3995 | let mut selection = SamplingChannelSelection::default();
  1061. 272.63 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1062. 272.63 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1063. 272.63 s [gammaloop-workspace-clippy]
  1064. 272.64 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1065. 272.64 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4073:9
  1066. 272.64 s [gammaloop-workspace-clippy] |
  1067. 272.64 s [gammaloop-workspace-clippy] 4073 | selection.default_channel_selection = vec!["left_target".into()];
  1068. 272.64 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1069. 272.64 s [gammaloop-workspace-clippy] |
  1070. 272.64 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["left_target".into()], ..Default::default() }` and removing relevant reassignments
  1071. 272.64 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4072:9
  1072. 272.64 s [gammaloop-workspace-clippy] |
  1073. 272.64 s [gammaloop-workspace-clippy] 4072 | let mut selection = SamplingChannelSelection::default();
  1074. 272.64 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1075. 272.64 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1076. 272.64 s [gammaloop-workspace-clippy]
  1077. 272.64 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1078. 272.64 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4117:9
  1079. 272.64 s [gammaloop-workspace-clippy] |
  1080. 272.64 s [gammaloop-workspace-clippy] 4117 | selection.default_channel_selection = vec!["threshold".into()];
  1081. 272.64 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1082. 272.64 s [gammaloop-workspace-clippy] |
  1083. 272.64 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  1084. 272.64 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4116:9
  1085. 272.64 s [gammaloop-workspace-clippy] |
  1086. 272.64 s [gammaloop-workspace-clippy] 4116 | let mut selection = SamplingChannelSelection::default();
  1087. 272.64 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1088. 272.64 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1089. 272.64 s [gammaloop-workspace-clippy]
  1090. 272.64 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1091. 272.64 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4141:9
  1092. 272.64 s [gammaloop-workspace-clippy] |
  1093. 272.64 s [gammaloop-workspace-clippy] 4141 | selection.default_channel_selection = vec!["joint".into()];
  1094. 272.64 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1095. 272.64 s [gammaloop-workspace-clippy] |
  1096. 272.64 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  1097. 272.64 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4140:9
  1098. 272.64 s [gammaloop-workspace-clippy] |
  1099. 272.64 s [gammaloop-workspace-clippy] 4140 | let mut selection = SamplingChannelSelection::default();
  1100. 272.64 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1101. 272.64 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1102. 272.64 s [gammaloop-workspace-clippy]
  1103. 272.64 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1104. 272.64 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4174:9
  1105. 272.64 s [gammaloop-workspace-clippy] |
  1106. 272.64 s [gammaloop-workspace-clippy] 4174 | selection.default_channel_selection = vec!["joint".into()];
  1107. 272.64 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1108. 272.64 s [gammaloop-workspace-clippy] |
  1109. 272.64 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  1110. 272.64 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4173:9
  1111. 272.64 s [gammaloop-workspace-clippy] |
  1112. 272.64 s [gammaloop-workspace-clippy] 4173 | let mut selection = SamplingChannelSelection::default();
  1113. 272.64 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1114. 272.64 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1115. 272.64 s [gammaloop-workspace-clippy]
  1116. 272.64 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1117. 272.64 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4231:9
  1118. 272.64 s [gammaloop-workspace-clippy] |
  1119. 272.64 s [gammaloop-workspace-clippy] 4231 | selection.default_channel_selection = vec!["joint".into()];
  1120. 272.64 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1121. 272.64 s [gammaloop-workspace-clippy] |
  1122. 272.64 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  1123. 272.64 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4230:9
  1124. 272.64 s [gammaloop-workspace-clippy] |
  1125. 272.64 s [gammaloop-workspace-clippy] 4230 | let mut selection = SamplingChannelSelection::default();
  1126. 272.64 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1127. 272.64 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1128. 272.64 s [gammaloop-workspace-clippy]
  1129. 272.65 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1130. 272.65 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4335:9
  1131. 272.65 s [gammaloop-workspace-clippy] |
  1132. 272.65 s [gammaloop-workspace-clippy] 4335 | selection.default_channel_selection = vec!["auto:lmb".into()];
  1133. 272.65 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1134. 272.65 s [gammaloop-workspace-clippy] |
  1135. 272.65 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  1136. 272.65 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4334:9
  1137. 272.65 s [gammaloop-workspace-clippy] |
  1138. 272.65 s [gammaloop-workspace-clippy] 4334 | let mut selection = SamplingChannelSelection::default();
  1139. 272.65 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1140. 272.65 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1141. 272.65 s [gammaloop-workspace-clippy]
  1142. 272.65 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1143. 272.65 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4383:9
  1144. 272.65 s [gammaloop-workspace-clippy] |
  1145. 272.65 s [gammaloop-workspace-clippy] 4383 | selection.default_channel_selection = vec!["auto:lmb".into()];
  1146. 272.65 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1147. 272.65 s [gammaloop-workspace-clippy] |
  1148. 272.65 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  1149. 272.65 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4382:9
  1150. 272.65 s [gammaloop-workspace-clippy] |
  1151. 272.65 s [gammaloop-workspace-clippy] 4382 | let mut selection = SamplingChannelSelection::default();
  1152. 272.65 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1153. 272.65 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1154. 272.65 s [gammaloop-workspace-clippy]
  1155. 272.65 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1156. 272.65 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4417:9
  1157. 272.65 s [gammaloop-workspace-clippy] |
  1158. 272.65 s [gammaloop-workspace-clippy] 4417 | selection.default_channel_selection = vec!["auto:lmb".into()];
  1159. 272.65 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1160. 272.65 s [gammaloop-workspace-clippy] |
  1161. 272.65 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  1162. 272.65 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4416:9
  1163. 272.65 s [gammaloop-workspace-clippy] |
  1164. 272.65 s [gammaloop-workspace-clippy] 4416 | let mut selection = SamplingChannelSelection::default();
  1165. 272.65 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1166. 272.65 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1167. 272.65 s [gammaloop-workspace-clippy]
  1168. 272.80 s [gammaloop-workspace-clippy] error: using `clone` on type `Complex<F<f64>>` which implements the `Copy` trait
  1169. 272.80 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:160:32
  1170. 272.80 s [gammaloop-workspace-clippy] |
  1171. 272.80 s [gammaloop-workspace-clippy] 160 | value: value.values[0].clone(),
  1172. 272.80 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `value.values[0]`
  1173. 272.80 s [gammaloop-workspace-clippy] |
  1174. 272.80 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  1175. 272.80 s [gammaloop-workspace-clippy]
  1176. 273.22 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1177. 273.22 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:5872:9
  1178. 273.22 s [gammaloop-workspace-clippy] |
  1179. 273.22 s [gammaloop-workspace-clippy] 5872 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  1180. 273.22 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1181. 273.22 s [gammaloop-workspace-clippy] |
  1182. 273.22 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  1183. 273.22 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:5871:9
  1184. 273.22 s [gammaloop-workspace-clippy] |
  1185. 273.22 s [gammaloop-workspace-clippy] 5871 | let mut selection = SamplingChannelSelection::default();
  1186. 273.22 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1187. 273.22 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1188. 273.22 s [gammaloop-workspace-clippy]
  1189. 273.22 s [gammaloop-workspace-clippy] error: field assignment outside of initializer for an instance created with Default::default()
  1190. 273.22 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:5875:9
  1191. 273.22 s [gammaloop-workspace-clippy] |
  1192. 273.22 s [gammaloop-workspace-clippy] 5875 | parameterization_settings.sampling_channels = selection;
  1193. 273.22 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1194. 273.22 s [gammaloop-workspace-clippy] |
  1195. 273.22 s [gammaloop-workspace-clippy] note: consider initializing the variable with `settings::runtime::ParameterizationSettings { sampling_channels: selection, ..Default::default() }` and removing relevant reassignments
  1196. 273.22 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/process/mod.rs:5874:9
  1197. 273.22 s [gammaloop-workspace-clippy] |
  1198. 273.22 s [gammaloop-workspace-clippy] 5874 | let mut parameterization_settings = ParameterizationSettings::default();
  1199. 273.22 s [gammaloop-workspace-clippy] | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1200. 273.22 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  1201. 273.22 s [gammaloop-workspace-clippy]
  1202. 273.23 s [gammaloop-workspace-clippy] error: large size difference between variants
  1203. 273.23 s [gammaloop-workspace-clippy] --> crates/gammalooprs/src/integrands/mod.rs:54:1
  1204. 273.23 s [gammaloop-workspace-clippy] |
  1205. 273.23 s [gammaloop-workspace-clippy] 54 | / pub enum Integrand {
  1206. 273.23 s [gammaloop-workspace-clippy] 55 | | ProcessIntegrand(Box<ProcessIntegrand>),
  1207. 273.23 s [gammaloop-workspace-clippy] | | --------------------------------------- the second-largest variant contains at least 8 bytes
  1208. 273.23 s [gammaloop-workspace-clippy] 56 | | #[cfg(test)]
  1209. 273.23 s [gammaloop-workspace-clippy] 57 | | TestProbe(TestProbeIntegrand),
  1210. 273.23 s [gammaloop-workspace-clippy] | | ----------------------------- the largest variant contains at least 888 bytes
  1211. 273.23 s [gammaloop-workspace-clippy] 58 | | }
  1212. 273.23 s [gammaloop-workspace-clippy] | |_^ the entire enum is at least 888 bytes
  1213. 273.23 s [gammaloop-workspace-clippy] |
  1214. 273.23 s [gammaloop-workspace-clippy] = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#large_enum_variant
  1215. 273.23 s [gammaloop-workspace-clippy] = note: `-D clippy::large-enum-variant` implied by `-D warnings`
  1216. 273.23 s [gammaloop-workspace-clippy] = help: to override `-D warnings` add `#[allow(clippy::large_enum_variant)]`
  1217. 273.23 s [gammaloop-workspace-clippy] help: consider boxing the large fields or introducing indirection in some other way to reduce the total size of the enum
  1218. 273.23 s [gammaloop-workspace-clippy] |
  1219. 273.23 s [gammaloop-workspace-clippy] 57 - TestProbe(TestProbeIntegrand),
  1220. 273.23 s [gammaloop-workspace-clippy] 57 + TestProbe(Box<TestProbeIntegrand>),
  1221. 273.23 s [gammaloop-workspace-clippy] |
  1222. 273.23 s [gammaloop-workspace-clippy]
  1223. 280.31 s [gammaloop-workspace-clippy] error: could not compile `gammalooprs` (lib test) due to 55 previous errors
  1224. 280.77 s Progress: 0 of 1 built (1 failed)
  1225. 280.77 s Failed to build gammaloop-workspace-clippy after 4m38s
  1226. 280.78 s Cannot build '/nix/store/z8sf2mg4fcvfiz9rpa1fig6kk8xplfhj-gammaloop-workspace-clippy-0.1.0.drv'.
  1227. 280.78 s Reason: builder failed with exit code 101.
  1228. 280.78 s Output paths:
  1229. 280.78 s /nix/store/fhfmasv8hw8yr3i3fhw92yfiz3ybmzhi-gammaloop-workspace-clippy-0.1.0
  1230. 280.78 s Last 1220 log lines:
  1231. 280.78 s > Running phase: unpackPhase
  1232. 280.78 s > unpacking source archive /nix/store/d6ym1w3z3dvqglkyhyd37z00vfsb641k-source
  1233. 280.78 s > source root is source
  1234. 280.78 s > Running phase: patchPhase
  1235. 280.78 s > Executing configureCargoCommonVars
  1236. 280.78 s > decompressing cargo artifacts from /nix/store/50vpxlcgfxf2d57i27v3d10zjwxxbm2r-gammaloop-workspace-deps-deps-0.1.0/target.tar.zst to target
  1237. 280.78 s > Running phase: updateAutotoolsGnuConfigScriptsPhase
  1238. 280.78 s > Running phase: configurePhase
  1239. 280.78 s > will append /build/source/.cargo-home/config.toml with contents of /nix/store/5drf77x6km4ky7gwlrzdx9bbd6fz09g3-vendor-cargo-deps/config.toml
  1240. 280.78 s > default configurePhase, nothing to do
  1241. 280.78 s > Running phase: buildPhase
  1242. 280.78 s > +++ command cargo --version
  1243. 280.78 s > cargo 1.97.0 (c980f4866 2026-06-30)
  1244. 280.78 s > +++ command cargo clippy --profile ci-optim --locked --workspace --features gammaloop-tracing-filter/clap,gammaloop-tracing-filter/symbolica,idenso/bincode,idenso/reference-cases,linnet/bincode,linnet/drawing,linnet/rkyv,linnet/serde,linnet/symbolica,spenso-macros/shadowing,spenso/shadowing,symbolica/tracing_max_level_info,three-dimensional-reps/display,three-dimensional-reps/eval,three-dimensional-reps/serde --all-targets --no-deps -- --deny warnings
  1245. 280.78 s > Checking cfg-if v1.0.4
  1246. 280.78 s > Checking memchr v2.8.0
  1247. 280.78 s > Checking once_cell v1.21.4
  1248. 280.78 s > Checking either v1.15.0
  1249. 280.78 s > Checking serde_core v1.0.228
  1250. 280.78 s > Checking libc v0.2.186
  1251. 280.78 s > Checking libm v0.2.16
  1252. 280.78 s > Checking itoa v1.0.18
  1253. 280.78 s > Checking log v0.4.29
  1254. 280.78 s > Checking regex-syntax v0.8.10
  1255. 280.78 s > Checking zerocopy v0.8.48
  1256. 280.78 s > Checking crossbeam-utils v0.8.21
  1257. 280.78 s > Checking equivalent v1.0.2
  1258. 280.78 s > Checking zmij v1.0.21
  1259. 280.78 s > Checking bytemuck v1.25.0
  1260. 280.78 s > Checking lazy_static v1.5.0
  1261. 280.78 s > Compiling target-lexicon v0.13.5
  1262. 280.78 s > Checking arrayvec v0.7.6
  1263. 280.78 s > Checking powerfmt v0.2.0
  1264. 280.78 s > Checking num-conv v0.2.1
  1265. 280.78 s > Checking num_threads v0.1.7
  1266. 280.78 s > Checking itertools v0.14.0
  1267. 280.78 s > Checking pin-project-lite v0.2.17
  1268. 280.78 s > Checking time-core v0.1.8
  1269. 280.78 s > Checking tracing-core v0.1.36
  1270. 280.78 s > Checking deranged v0.5.8
  1271. 280.78 s > Checking foldhash v0.2.0
  1272. 280.78 s > Checking allocator-api2 v0.2.21
  1273. 280.78 s > Checking const-random v0.1.18
  1274. 280.78 s > Checking safe_arch v0.7.4
  1275. 280.78 s > Checking static_assertions v1.1.0
  1276. 280.78 s > Checking winnow v1.0.2
  1277. 280.78 s > Checking unty v0.0.4
  1278. 280.78 s > Checking nu-ansi-term v0.50.3
  1279. 280.78 s > Checking safe_arch v1.0.0
  1280. 280.78 s > Checking aho-corasick v1.1.4
  1281. 280.78 s > Checking crossbeam-epoch v0.9.18
  1282. 280.78 s > Checking wide v0.7.33
  1283. 280.78 s > Checking sharded-slab v0.1.7
  1284. 280.78 s > Checking tracing v0.1.44
  1285. 280.78 s > Checking hashbrown v0.16.1
  1286. 280.78 s > Checking crossbeam-deque v0.8.6
  1287. 280.78 s > Checking tracing-log v0.2.0
  1288. 280.78 s > Checking thread_local v1.1.9
  1289. 280.78 s > Checking rayon-core v1.13.0
  1290. 280.78 s > Checking num-traits v0.2.19
  1291. 280.78 s > Checking az v1.3.0
  1292. 280.78 s > Checking toml_writer v1.1.1+spec-1.1.0
  1293. 280.78 s > Checking indenter v0.3.4
  1294. 280.78 s > Checking wide v1.3.0
  1295. 280.78 s > Compiling phf_shared v0.11.3
  1296. 280.78 s > Checking anyhow v1.0.102
  1297. 280.78 s > Checking rawpointer v0.2.1
  1298. 280.78 s > Checking toml_parser v1.1.2+spec-1.1.0
  1299. 280.78 s > Checking alloc-no-stdlib v2.0.4
  1300. 280.78 s > Checking dyn-clone v1.0.20
  1301. 280.78 s > Checking utf8parse v0.2.2
  1302. 280.78 s > Checking matrixmultiply v0.3.10
  1303. 280.78 s > Checking alloc-stdlib v0.2.2
  1304. 280.78 s > Checking colorchoice v1.0.5
  1305. 280.78 s > Checking anstyle-parse v1.0.0
  1306. 280.78 s > Checking rayon v1.12.0
  1307. 280.78 s > Checking getrandom v0.3.4
  1308. 280.78 s > Checking time v0.3.47
  1309. 280.78 s > Checking gmp-mpfr-sys v1.7.1
  1310. 280.78 s > Checking anstyle-query v1.1.5
  1311. 280.78 s > Checking is_terminal_polyfill v1.70.2
  1312. 280.78 s > Checking approx v0.5.1
  1313. 280.78 s > Checking rand_core v0.9.5
  1314. 280.78 s > Checking num-integer v0.1.46
  1315. 280.78 s > Checking anstyle v1.0.14
  1316. 280.78 s > Checking colored v3.1.1
  1317. 280.78 s > Compiling phf_generator v0.11.3
  1318. 280.78 s > Checking eyre v0.6.12
  1319. 280.78 s > Checking serde v1.0.228
  1320. 280.78 s > Checking serde_json v1.0.149
  1321. 280.78 s > Checking regex-automata v0.4.14
  1322. 280.78 s > Checking bitflags v2.11.1
  1323. 280.78 s > Checking serde_spanned v1.1.1
  1324. 280.78 s > Checking toml_datetime v1.1.1+spec-1.1.0
  1325. 280.78 s > Checking anstream v1.0.0
  1326. 280.78 s > Checking unicode-width v0.2.2
  1327. 280.78 s > Checking bitflags v1.3.2
  1328. 280.78 s > Checking brotli-decompressor v5.0.0
  1329. 280.78 s > Checking wasmtime-jit-icache-coherence v34.0.2
  1330. 280.78 s > Compiling phf_codegen v0.11.3
  1331. 280.78 s > Checking toml v1.1.2+spec-1.1.0
  1332. 280.78 s > Checking region v3.0.2
  1333. 280.78 s > Checking hugepage-rs v0.1.1
  1334. 280.78 s > Checking spec_math v0.1.6
  1335. 280.78 s > Checking inventory v0.3.24
  1336. 280.78 s > Checking thiserror v2.0.18
  1337. 280.78 s > Compiling getopts v0.2.24
  1338. 280.78 s > Checking libloading v0.9.0
  1339. 280.78 s > Checking smallvec v1.15.1
  1340. 280.78 s > Checking num-complex v0.4.6
  1341. 280.78 s > Checking bincode v2.0.1
  1342. 280.78 s > Compiling pyo3-build-config v0.28.3
  1343. 280.78 s > Checking tracing-serde v0.2.0
  1344. 280.78 s > Checking smartstring v1.0.1
  1345. 280.78 s > Checking byteorder v1.5.0
  1346. 280.78 s > Checking self_cell v1.2.2
  1347. 280.78 s > Checking append-only-vec v0.1.8
  1348. 280.78 s > Checking bytes v1.11.1
  1349. 280.78 s > Checking tinyjson v2.5.1
  1350. 280.78 s > Checking simba v0.9.1
  1351. 280.78 s > Compiling unicode_names2_generator v1.3.0
  1352. 280.78 s > Compiling unic-common v0.9.0
  1353. 280.78 s > Checking linux-raw-sys v0.12.1
  1354. 280.78 s > Compiling unic-char-range v0.9.0
  1355. 280.78 s > Compiling unic-char-property v0.9.0
  1356. 280.78 s > Compiling unic-ucd-version v0.9.0
  1357. 280.78 s > Checking brotli v8.0.2
  1358. 280.78 s > Compiling is-macro v0.3.7
  1359. 280.78 s > Compiling rustpython-parser-vendored v0.4.0
  1360. 280.78 s > Checking iana-time-zone v0.1.65
  1361. 280.78 s > Checking rustix v1.1.4
  1362. 280.78 s > Compiling rustpython-parser v0.4.0
  1363. 280.78 s > Compiling phf v0.11.3
  1364. 280.78 s > Checking rustc-hash v2.1.2
  1365. 280.78 s > Checking chrono v0.4.44
  1366. 280.78 s > Compiling unic-ucd-ident v0.9.0
  1367. 280.78 s > Compiling unic-emoji-char v0.9.0
  1368. 280.78 s > Checking ndarray v0.17.2
  1369. 280.78 s > Compiling lalrpop-util v0.20.2
  1370. 280.78 s > Compiling rustc-hash v1.1.0
  1371. 280.78 s > Checking rug v1.30.0
  1372. 280.78 s > Checking unicode-segmentation v1.13.2
  1373. 280.78 s > Compiling symbolica v2.2.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  1374. 280.78 s > Checking typenum v1.20.0
  1375. 280.78 s > Checking getrandom v0.2.17
  1376. 280.78 s > Checking ppv-lite86 v0.2.21
  1377. 280.78 s > Checking ahash v0.8.12
  1378. 280.78 s > Checking scopeguard v1.2.0
  1379. 280.78 s > Checking lock_api v0.4.14
  1380. 280.78 s > Checking rand_chacha v0.9.0
  1381. 280.78 s > Checking parking_lot_core v0.9.12
  1382. 280.78 s > Checking hashbrown v0.17.0
  1383. 280.78 s > Checking unicode-ident v1.0.24
  1384. 280.78 s > Checking rand v0.9.4
  1385. 280.78 s > Checking parking_lot v0.12.5
  1386. 280.78 s > Checking errno v0.3.14
  1387. 280.78 s > Checking unicase v2.9.0
  1388. 280.78 s > Checking generic-array v0.14.7
  1389. 280.78 s > Checking strsim v0.11.1
  1390. 280.78 s > Checking clap_lex v1.1.0
  1391. 280.78 s > Checking signal-hook-registry v1.4.8
  1392. 280.78 s > Checking vte v0.14.1
  1393. 280.78 s > Checking same-file v1.0.6
  1394. 280.78 s > Checking matchers v0.2.0
  1395. 280.78 s > Checking regex v1.12.3
  1396. 280.78 s > Checking terminal_size v0.4.4
  1397. 280.78 s > Checking signal-hook v0.3.18
  1398. 280.78 s > Checking walkdir v2.5.0
  1399. 280.78 s > Checking tracing-subscriber v0.3.23
  1400. 280.78 s > Checking indexmap v2.14.0
  1401. 280.78 s > Checking clap_builder v4.6.0
  1402. 280.78 s > Checking symjit v2.21.0
  1403. 280.78 s > Checking half v2.7.1
  1404. 280.78 s > Checking block-buffer v0.10.4
  1405. 280.78 s > Checking crypto-common v0.1.7
  1406. 280.78 s > Checking mio v1.2.0
  1407. 280.78 s > Checking minimal-lexical v0.2.1
  1408. 280.78 s > Checking ciborium-io v0.2.2
  1409. 280.78 s > Checking ciborium-ll v0.2.2
  1410. 280.78 s > Checking digest v0.10.7
  1411. 280.78 s > Checking derive_more v2.1.1
  1412. 280.78 s > Checking console v0.16.3
  1413. 280.78 s > Checking num-bigint v0.4.6
  1414. 280.78 s > Checking bstr v1.12.1
  1415. 280.78 s > Checking nom v7.1.3
  1416. 280.78 s > Checking signal-hook-mio v0.2.5
  1417. 280.78 s > Checking cpufeatures v0.2.17
  1418. 280.78 s > Checking linux-raw-sys v0.4.15
  1419. 280.78 s > Checking winnow v0.7.15
  1420. 280.78 s > Checking globset v0.4.18
  1421. 280.78 s > Checking rustix v0.38.44
  1422. 280.78 s > Checking sha2 v0.10.9
  1423. 280.78 s > Checking ciborium v0.2.2
  1424. 280.78 s > Checking getrandom v0.4.2
  1425. 280.78 s > Checking rand_core v0.6.4
  1426. 280.78 s > Checking fastrand v2.4.1
  1427. 280.78 s > Checking fnv v1.0.7
  1428. 280.78 s > Checking plotters-backend v0.3.7
  1429. 280.78 s > Checking crossterm v0.28.1
  1430. 280.78 s > Checking rust-embed-utils v8.11.0
  1431. 280.78 s > Compiling unicode_names2 v1.3.0
  1432. 280.78 s > Checking serde_spanned v0.6.9
  1433. 280.78 s > Checking tempfile v3.27.0
  1434. 280.78 s > Checking clap v4.6.1
  1435. 280.78 s > Checking toml_datetime v0.6.11
  1436. 280.78 s > Checking itertools v0.10.5
  1437. 280.78 s > Checking plotters-svg v0.3.7
  1438. 280.78 s > Checking cast v0.3.0
  1439. 280.78 s > Checking xprec v0.2.2
  1440. 280.78 s > Checking tap v1.0.1
  1441. 280.78 s > Checking toml_write v0.1.2
  1442. 280.78 s > Checking plotters v0.3.7
  1443. 280.78 s > Checking rand_chacha v0.3.1
  1444. 280.78 s > Checking radium v0.7.0
  1445. 280.78 s > Checking wyz v0.5.1
  1446. 280.78 s > Checking typeid v1.0.3
  1447. 280.78 s > Checking similar v2.7.0
  1448. 280.78 s > Checking tinytemplate v1.2.1
  1449. 280.78 s > Checking ansitok v0.3.0
  1450. 280.78 s > Checking is-terminal v0.4.17
  1451. 280.78 s > Checking funty v2.0.0
  1452. 280.78 s > Checking bytecount v0.6.9
  1453. 280.78 s > Checking anes v0.1.6
  1454. 280.78 s > Checking toml_edit v0.22.27
  1455. 280.78 s > Checking oorandom v11.1.5
  1456. 280.78 s > Checking rand v0.8.6
  1457. 280.78 s > Checking ron v0.12.1
  1458. 280.78 s > Checking toml_edit v0.25.11+spec-1.1.0
  1459. 280.78 s > Checking ansi-str v0.9.0
  1460. 280.78 s > Checking bitvec v1.0.1
  1461. 280.78 s > Checking testing_table v0.3.0
  1462. 280.78 s > Checking env_filter v1.0.1
  1463. 280.78 s > Checking uncased v0.9.10
  1464. 280.78 s > Checking criterion-plot v0.5.0
  1465. 280.78 s > Checking jiff v0.2.24
  1466. 280.78 s > Checking ptr_meta v0.1.4
  1467. 280.78 s > Checking simdutf8 v0.1.5
  1468. 280.78 s > Checking ucd-trie v0.1.7
  1469. 280.78 s > Checking ahash v0.7.8
  1470. 280.78 s > Checking pest v2.8.6
  1471. 280.78 s > Checking bytecheck v0.6.12
  1472. 280.78 s > Checking criterion v0.5.1
  1473. 280.78 s > Checking papergrid v0.17.0
  1474. 280.78 s > Checking approx v0.4.0
  1475. 280.78 s > Checking hashbrown v0.12.3
  1476. 280.78 s > Checking seahash v4.1.0
  1477. 280.78 s > Checking cgmath v0.18.0
  1478. 280.78 s > Checking num-rational v0.4.2
  1479. 280.78 s > Checking rend v0.4.2
  1480. 280.78 s > Checking num-iter v0.1.45
  1481. 280.78 s > Checking ref-ops v0.2.5
  1482. 280.78 s > Checking insta v1.47.2
  1483. 280.78 s > Checking rand_xoshiro v0.6.0
  1484. 280.78 s > Checking features v0.10.0
  1485. 280.78 s > Checking gat-lending-iterator v0.1.8
  1486. 280.78 s > Checking num v0.4.3
  1487. 280.78 s > Checking dot-parser v0.5.1
  1488. 280.78 s > Checking constcat v0.5.1
  1489. 280.78 s > Checking colored v2.2.0
  1490. 280.78 s > Checking toml v0.8.23
  1491. 280.78 s > Checking arrayref v0.3.9
  1492. 280.78 s > Checking constant_time_eq v0.4.2
  1493. 280.78 s > Checking tabled v0.20.0
  1494. 280.78 s > Checking cpufeatures v0.3.0
  1495. 280.78 s > Checking base64 v0.22.1
  1496. 280.78 s > Checking blake3 v1.8.5
  1497. 280.78 s > Checking joinery v2.1.0
  1498. 280.78 s > Checking siphasher v1.0.2
  1499. 280.78 s > Checking titlecase v2.2.1
  1500. 280.78 s > Checking subprocess v0.2.15
  1501. 280.78 s > Checking figment v0.10.19
  1502. 280.78 s > Checking rust_lisp v0.18.0
  1503. 280.78 s > Compiling vakint v0.1.2 (/build/source/crates/vakint)
  1504. 280.78 s > Checking phf_shared v0.13.1
  1505. 280.78 s > Checking version-compare v0.2.1
  1506. 280.78 s > Checking phf v0.13.1
  1507. 280.78 s > Checking xpct v0.5.1
  1508. 280.78 s > Checking ryu v1.0.23
  1509. 280.78 s > Compiling pyo3-ffi v0.28.3
  1510. 280.78 s > Compiling pyo3-macros-backend v0.28.3
  1511. 280.78 s > Compiling pyo3 v0.28.3
  1512. 280.78 s > Compiling numpy v0.28.0
  1513. 280.78 s > Checking string-template-plus v0.4.3
  1514. 280.78 s > Checking castaway v0.2.4
  1515. 280.78 s > Checking toml_datetime v0.7.5+spec-1.1.0
  1516. 280.78 s > Checking strum v0.27.2
  1517. 280.78 s > Checking compact_str v0.9.0
  1518. 280.78 s > Checking unicode-truncate v2.0.1
  1519. 280.78 s > Checking toml v0.9.12+spec-1.1.0
  1520. 280.78 s > Checking kasuari v0.4.12
  1521. 280.78 s > Checking lru v0.16.4
  1522. 280.78 s > Checking vte v0.15.0
  1523. 280.78 s > Checking portable-atomic v1.13.1
  1524. 280.78 s > Checking unit-prefix v0.5.2
  1525. 280.78 s > Checking rand_distr v0.4.3
  1526. 280.78 s > Checking simba v0.6.0
  1527. 280.78 s > Checking line-clipping v0.3.7
  1528. 280.78 s > Checking vt100 v0.16.2
  1529. 280.78 s > Compiling three-dimensional-reps v0.1.0 (/build/source/crates/three-dimensional-reps)
  1530. 280.78 s > Checking gimli v0.32.3
  1531. 280.78 s > Checking adler2 v2.0.1
  1532. 280.78 s > Checking ratatui-core v0.1.0
  1533. 280.78 s > Checking miniz_oxide v0.8.9
  1534. 280.78 s > Checking thiserror v1.0.69
  1535. 280.78 s > Checking derive_builder v0.11.2
  1536. 280.78 s > Checking crossterm v0.29.0
  1537. 280.78 s > Checking object v0.37.3
  1538. 280.78 s > Checking owo-colors v4.3.0
  1539. 280.78 s > Checking env_logger v0.11.10
  1540. 280.78 s > Checking indicatif v0.18.4
  1541. 280.78 s > Checking tracing-error v0.2.1
  1542. 280.78 s > Checking typed-index-collections v3.5.0
  1543. 280.78 s > Checking serde-big-array v0.5.1
  1544. 280.78 s > Checking amd v0.2.2
  1545. 280.78 s > Checking itertools v0.11.0
  1546. 280.78 s > Compiling rustpython-parser-core v0.4.0
  1547. 280.78 s > Compiling gammaloop-tracing-filter-macros v0.1.0 (/build/source/crates/gammaloop-tracing-filter-macros)
  1548. 280.78 s > Checking option-ext v0.2.0
  1549. 280.78 s > Checking rustc-demangle v0.1.27
  1550. 280.78 s > Checking dirs-sys v0.5.0
  1551. 280.78 s > Checking rkyv v0.7.46
  1552. 280.78 s > Compiling rustpython-ast v0.4.0
  1553. 280.78 s > Checking ref-cast v1.0.25
  1554. 280.78 s > Checking nix v0.31.2
  1555. 280.78 s > Checking integer-sqrt v0.1.5
  1556. 280.78 s > Checking brotli-decompressor v4.0.3
  1557. 280.78 s > Checking crossbeam-channel v0.5.15
  1558. 280.78 s > Checking itertools v0.12.1
  1559. 280.78 s > Checking symlink v0.1.0
  1560. 280.78 s > Compiling gammalooprs v0.3.4 (/build/source/crates/gammalooprs)
  1561. 280.78 s > Checking unsafe-libyaml v0.2.11
  1562. 280.78 s > Checking ratatui-widgets v0.3.0
  1563. 280.78 s > Checking color-spantrace v0.3.0
  1564. 280.78 s > Checking ratatui-crossterm v0.1.0
  1565. 280.78 s > Checking tracing-appender v0.2.5
  1566. 280.78 s > Checking include_dir v0.7.4
  1567. 280.78 s > Checking ctrlc v3.5.2
  1568. 280.78 s > Checking pathfinding v4.15.0
  1569. 280.78 s > Checking tracing-indicatif v0.3.14
  1570. 280.78 s > Checking schemars v1.2.1
  1571. 280.78 s > Checking slotmap v1.1.1
  1572. 280.78 s > Checking dirs v6.0.0
  1573. 280.78 s > Checking clarabel v0.11.1
  1574. 280.78 s > Checking json5 v0.4.1
  1575. 280.78 s > Checking brotli v7.0.0
  1576. 280.78 s > Checking serde_yaml v0.9.34+deprecated
  1577. 280.78 s > Checking vectorize v0.2.0
  1578. 280.78 s > Checking base62 v2.2.4
  1579. 280.78 s > Checking ringbuffer v0.16.0
  1580. 280.78 s > Checking ratatui-macros v0.7.0
  1581. 280.78 s > Checking ratatui v0.30.0
  1582. 280.78 s > Checking rust-embed v8.11.0
  1583. 280.78 s > Checking addr2line v0.25.1
  1584. 280.78 s > Checking clap_complete v4.6.3
  1585. 280.78 s > Checking strip-ansi-escapes v0.2.1
  1586. 280.78 s > Checking fd-lock v4.0.4
  1587. 280.78 s > Compiling gammaloop-api v0.1.0 (/build/source/crates/gammaloop-api)
  1588. 280.78 s > Checking itertools v0.13.0
  1589. 280.78 s > Checking strum v0.26.3
  1590. 280.78 s > Checking sysinfo v0.33.1
  1591. 280.78 s > Checking shlex v1.3.0
  1592. 280.78 s > Checking slab v0.4.12
  1593. 280.78 s > Checking clap_complete_nushell v4.6.0
  1594. 280.78 s > Checking futures-task v0.3.32
  1595. 280.78 s > Checking futures-core v0.3.32
  1596. 280.78 s > Checking sdd v3.0.10
  1597. 280.78 s > Compiling gammaloop-integration-tests v0.1.0 (/build/source/tests)
  1598. 280.78 s > Compiling test-log-core v0.2.20
  1599. 280.78 s > Checking futures-util v0.3.32
  1600. 280.78 s > Compiling rustc_version v0.4.1
  1601. 280.78 s > Checking which v8.0.2
  1602. 280.78 s > Checking scc v2.4.0
  1603. 280.78 s > Compiling numerica v2.2.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  1604. 280.78 s > Checking bincode v1.3.3
  1605. 280.78 s > Compiling gungraun-runner v0.18.2
  1606. 280.78 s > Checking backtrace v0.3.76
  1607. 280.78 s > Checking nalgebra v0.29.0
  1608. 280.78 s > Compiling gungraun-macros v0.8.0
  1609. 280.78 s > Checking reedline v0.42.0
  1610. 280.78 s > Checking color-eyre v0.6.5
  1611. 280.78 s > Checking proc-macro2 v1.0.106
  1612. 280.78 s > Checking base64 v0.21.7
  1613. 280.78 s > Checking maplit v1.0.2
  1614. 280.78 s > Checking ron v0.8.1
  1615. 280.78 s > Compiling iai-callgrind-runner v0.14.2
  1616. 280.78 s > Checking quote v1.0.45
  1617. 280.78 s > Checking futures-executor v0.3.32
  1618. 280.78 s > Checking serial_test v3.4.0
  1619. 280.78 s > Checking kurbo v0.13.0
  1620. 280.78 s > Checking wait-timeout v0.2.1
  1621. 280.78 s > Compiling iai-callgrind v0.14.2
  1622. 280.78 s > Checking quick-error v1.2.3
  1623. 280.78 s > Compiling test-log-macros v0.2.20
  1624. 280.78 s > Checking bit-vec v0.8.0
  1625. 280.78 s > Checking rusty-fork v0.3.1
  1626. 280.78 s > Checking syn v2.0.117
  1627. 280.78 s > Compiling iai-callgrind-macros v0.5.1
  1628. 280.78 s > Checking bit-set v0.8.0
  1629. 280.78 s > Checking rand_xorshift v0.4.0
  1630. 280.78 s > Checking console v0.15.11
  1631. 280.78 s > Checking unarray v0.1.4
  1632. 280.78 s > Checking pathdiff v0.2.3
  1633. 280.78 s > Checking proptest v1.11.0
  1634. 280.78 s > Checking similar-asserts v1.7.0
  1635. 280.78 s > Checking clinnet v0.1.8 (/build/source/crates/clinnet)
  1636. 280.78 s > Checking kurvst v0.1.0 (/build/source/crates/kurvst)
  1637. 280.78 s > Compiling graphica v2.1.0 (https://github.com/alphal00p/symbolica?rev=a277a8dadbaae5a8d6605f2f381991a601e1f345#a277a8da)
  1638. 280.78 s > Checking test-log v0.2.20
  1639. 280.78 s > Checking statrs v0.16.1
  1640. 280.78 s > Checking momtrop v0.3.0
  1641. 280.78 s > Checking gungraun v0.18.2
  1642. 280.78 s > Compiling pyo3-stub-gen-derive v0.17.2
  1643. 280.78 s > Compiling pyo3-macros v0.28.3
  1644. 280.78 s > Checking pyo3-stub-gen v0.17.2
  1645. 280.78 s > Checking symbolica-utils v0.1.0 (/build/source/crates/symbolica-utils)
  1646. 280.78 s > Checking spenso-macros v0.3.2 (/build/source/crates/spenso-macros)
  1647. 280.78 s > Compiling gammaloop-workspace-hack v0.1.0 (/build/source/crates/gammaloop-workspace-hack)
  1648. 280.78 s > Checking linnet v0.17.0 (/build/source/crates/linnet)
  1649. 280.78 s > Checking spenso v0.6.0 (/build/source/crates/spenso)
  1650. 280.78 s > Checking linnet-py v0.1.0 (/build/source/crates/linnet-py)
  1651. 280.78 s > Checking linnest v0.1.0 (/build/source/crates/linnest)
  1652. 280.78 s > Checking idenso v0.3.0 (/build/source/crates/idenso)
  1653. 280.78 s > Checking gammaloop-tracing-filter v0.1.0 (/build/source/crates/gammaloop-tracing-filter)
  1654. 280.78 s > Checking spenso-hep-lib v0.1.7 (/build/source/crates/spenso-hep-lib)
  1655. 280.78 s > Checking spynso3 v0.1.2 (/build/source/crates/spynso3)
  1656. 280.78 s > error: method `reinterpret_loop_momenta_and_compute_prefactor` is never used
  1657. 280.78 s > --> crates/gammalooprs/src/integrands/process/mod.rs:2681:19
  1658. 280.78 s > |
  1659. 280.78 s > 2144 | impl LmbMultiChannelingSetup {
  1660. 280.78 s > | ---------------------------- method in this implementation
  1661. 280.78 s > ...
  1662. 280.78 s > 2681 | pub(crate) fn reinterpret_loop_momenta_and_compute_prefactor<T: FloatLike>(
  1663. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1664. 280.78 s > |
  1665. 280.78 s > = note: `-D dead-code` implied by `-D warnings`
  1666. 280.78 s > = help: to override `-D warnings` add `#[expect(dead_code)]` or `#[allow(dead_code)]`
  1667. 280.78 s >
  1668. 280.78 s > error: manual implementation of an assign operation
  1669. 280.78 s > --> crates/gammalooprs/src/integrands/process/gammaloop_sample.rs:812:21
  1670. 280.78 s > |
  1671. 280.78 s > 812 | sample.sample.jacobian = sample.sample.jacobian * F::from_f64(partition_weight);
  1672. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace it with: `sample.sample.jacobian *= F::from_f64(partition_weight)`
  1673. 280.78 s > |
  1674. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#assign_op_pattern
  1675. 280.78 s > = note: `-D clippy::assign-op-pattern` implied by `-D warnings`
  1676. 280.78 s > = help: to override `-D warnings` add `#[allow(clippy::assign_op_pattern)]`
  1677. 280.78 s >
  1678. 280.78 s > error: doc list item without indentation
  1679. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:311:5
  1680. 280.78 s > |
  1681. 280.78 s > 311 | /// a selected LMB into a parent frame; graph code supplies the matrix and
  1682. 280.78 s > | ^
  1683. 280.78 s > |
  1684. 280.78 s > = help: if this is supposed to be its own paragraph, add a blank line
  1685. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#doc_lazy_continuation
  1686. 280.78 s > = note: `-D clippy::doc-lazy-continuation` implied by `-D warnings`
  1687. 280.78 s > = help: to override `-D warnings` add `#[allow(clippy::doc_lazy_continuation)]`
  1688. 280.78 s > help: indent this line
  1689. 280.78 s > |
  1690. 280.78 s > 311 | /// a selected LMB into a parent frame; graph code supplies the matrix and
  1691. 280.78 s > | ++
  1692. 280.78 s >
  1693. 280.78 s > error: doc list item without indentation
  1694. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:312:5
  1695. 280.78 s > |
  1696. 280.78 s > 312 | /// translation after resolving the relevant edge signatures and external data.
  1697. 280.78 s > | ^
  1698. 280.78 s > |
  1699. 280.78 s > = help: if this is supposed to be its own paragraph, add a blank line
  1700. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#doc_lazy_continuation
  1701. 280.78 s > help: indent this line
  1702. 280.78 s > |
  1703. 280.78 s > 312 | /// translation after resolving the relevant edge signatures and external data.
  1704. 280.78 s > | ++
  1705. 280.78 s >
  1706. 280.78 s > error: the loop variable `column` is only used to index `augmented`
  1707. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:404:31
  1708. 280.78 s > |
  1709. 280.78 s > 404 | for column in 0..2 * dimension {
  1710. 280.78 s > | ^^^^^^^^^^^^^^^^
  1711. 280.78 s > |
  1712. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#needless_range_loop
  1713. 280.78 s > = note: `-D clippy::needless-range-loop` implied by `-D warnings`
  1714. 280.78 s > = help: to override `-D warnings` add `#[allow(clippy::needless_range_loop)]`
  1715. 280.78 s > help: consider using an iterator
  1716. 280.78 s > |
  1717. 280.78 s > 404 - for column in 0..2 * dimension {
  1718. 280.78 s > 404 + for <item> in augmented.iter_mut().take(2 * dimension) {
  1719. 280.78 s > |
  1720. 280.78 s >
  1721. 280.78 s > error: this `if` statement can be collapsed
  1722. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:1915:9
  1723. 280.78 s > |
  1724. 280.78 s > 1915 | / if let SamplingMapDefinition::Lmb(edges) = &definition {
  1725. 280.78 s > 1916 | | if edges.len() != n_loop_momenta {
  1726. 280.78 s > 1917 | | return Err(eyre!(
  1727. 280.78 s > 1918 | | "lmb definition has {} edges, but the kernel has {} loop coordinates",
  1728. 280.78 s > ... |
  1729. 280.78 s > 1923 | | }
  1730. 280.78 s > | |_________^
  1731. 280.78 s > |
  1732. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1733. 280.78 s > = note: `-D clippy::collapsible-if` implied by `-D warnings`
  1734. 280.78 s > = help: to override `-D warnings` add `#[allow(clippy::collapsible_if)]`
  1735. 280.78 s > help: collapse nested if block
  1736. 280.78 s > |
  1737. 280.78 s > 1915 ~ if let SamplingMapDefinition::Lmb(edges) = &definition
  1738. 280.78 s > 1916 ~ && edges.len() != n_loop_momenta {
  1739. 280.78 s > 1917 | return Err(eyre!(
  1740. 280.78 s > ...
  1741. 280.78 s > 1921 | ));
  1742. 280.78 s > 1922 ~ }
  1743. 280.78 s > |
  1744. 280.78 s >
  1745. 280.78 s > error: manual implementation of `.is_multiple_of()`
  1746. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_reference.rs:135:12
  1747. 280.78 s > |
  1748. 280.78 s > 135 | if center.len() % 3 != 0 {
  1749. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^ help: replace with: `!center.len().is_multiple_of(3)`
  1750. 280.78 s > |
  1751. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#manual_is_multiple_of
  1752. 280.78 s > = note: `-D clippy::manual-is-multiple-of` implied by `-D warnings`
  1753. 280.78 s > = help: to override `-D warnings` add `#[allow(clippy::manual_is_multiple_of)]`
  1754. 280.78 s >
  1755. 280.78 s > error: manual implementation of `.is_multiple_of()`
  1756. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1024:47
  1757. 280.78 s > |
  1758. 280.78 s > 1024 | if self.raw_coordinates.is_empty() || self.raw_coordinates.len() % 3 != 0 {
  1759. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace with: `!self.raw_coordinates.len().is_multiple_of(3)`
  1760. 280.78 s > |
  1761. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#manual_is_multiple_of
  1762. 280.78 s >
  1763. 280.78 s > error: this `if` statement can be collapsed
  1764. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1565:5
  1765. 280.78 s > |
  1766. 280.78 s > 1565 | / if let Some(graph_id) = context.graph_id {
  1767. 280.78 s > 1566 | | if graph_id != prepared.graph_id {
  1768. 280.78 s > 1567 | | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  1769. 280.78 s > 1568 | | channel: channel.to_owned(),
  1770. 280.78 s > ... |
  1771. 280.78 s > 1575 | | }
  1772. 280.78 s > | |_____^
  1773. 280.78 s > |
  1774. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1775. 280.78 s > help: collapse nested if block
  1776. 280.78 s > |
  1777. 280.78 s > 1565 ~ if let Some(graph_id) = context.graph_id
  1778. 280.78 s > 1566 ~ && graph_id != prepared.graph_id {
  1779. 280.78 s > 1567 | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  1780. 280.78 s > ...
  1781. 280.78 s > 1573 | });
  1782. 280.78 s > 1574 ~ }
  1783. 280.78 s > |
  1784. 280.78 s >
  1785. 280.78 s > error: this `if` statement can be collapsed
  1786. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1585:5
  1787. 280.78 s > |
  1788. 280.78 s > 1585 | / if let Some(cut_id) = context.cut_id {
  1789. 280.78 s > 1586 | | if cut_id != prepared.cut_id {
  1790. 280.78 s > 1587 | | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  1791. 280.78 s > 1588 | | channel: channel.to_owned(),
  1792. 280.78 s > ... |
  1793. 280.78 s > 1595 | | }
  1794. 280.78 s > | |_____^
  1795. 280.78 s > |
  1796. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1797. 280.78 s > help: collapse nested if block
  1798. 280.78 s > |
  1799. 280.78 s > 1585 ~ if let Some(cut_id) = context.cut_id
  1800. 280.78 s > 1586 ~ && cut_id != prepared.cut_id {
  1801. 280.78 s > 1587 | return Err(SamplingChannelCompileError::InvalidPreparedCutContext {
  1802. 280.78 s > ...
  1803. 280.78 s > 1593 | });
  1804. 280.78 s > 1594 ~ }
  1805. 280.78 s > |
  1806. 280.78 s >
  1807. 280.78 s > error: very complex type used. Consider factoring parts into `type` definitions
  1808. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:1894:6
  1809. 280.78 s > |
  1810. 280.78 s > 1894 | ) -> Result<
  1811. 280.78 s > | ______^
  1812. 280.78 s > 1895 | | (
  1813. 280.78 s > 1896 | | Vec<Box<dyn SamplingMapComponent>>,
  1814. 280.78 s > 1897 | | Vec<Vec<usize>>,
  1815. 280.78 s > ... |
  1816. 280.78 s > 1900 | | SamplingChannelCompileError,
  1817. 280.78 s > 1901 | | > {
  1818. 280.78 s > | |_^
  1819. 280.78 s > |
  1820. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#type_complexity
  1821. 280.78 s > = note: `-D clippy::type-complexity` implied by `-D warnings`
  1822. 280.78 s > = help: to override `-D warnings` add `#[allow(clippy::type_complexity)]`
  1823. 280.78 s >
  1824. 280.78 s > error: this `if` statement can be collapsed
  1825. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2575:13
  1826. 280.78 s > |
  1827. 280.78 s > 2575 | / if let SamplingChannelSelector::Named(name) = selector {
  1828. 280.78 s > 2576 | | if let Some(channel) = resolved.named(name) {
  1829. 280.78 s > 2577 | | let entry = SamplingCatalogueEntry::Named(channel.clone());
  1830. 280.78 s > 2578 | | if !entries.contains(&entry) {
  1831. 280.78 s > ... |
  1832. 280.78 s > 2582 | | }
  1833. 280.78 s > | |_____________^
  1834. 280.78 s > |
  1835. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1836. 280.78 s > help: collapse nested if block
  1837. 280.78 s > |
  1838. 280.78 s > 2575 ~ if let SamplingChannelSelector::Named(name) = selector
  1839. 280.78 s > 2576 ~ && let Some(channel) = resolved.named(name) {
  1840. 280.78 s > 2577 | let entry = SamplingCatalogueEntry::Named(channel.clone());
  1841. 280.78 s > ...
  1842. 280.78 s > 2580 | }
  1843. 280.78 s > 2581 ~ }
  1844. 280.78 s > |
  1845. 280.78 s >
  1846. 280.78 s > error: this `if` statement can be collapsed
  1847. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:2600:13
  1848. 280.78 s > |
  1849. 280.78 s > 2600 | / if basis_ids.is_empty() && optimized_lmbs.is_empty() {
  1850. 280.78 s > 2601 | | if let Some((basis_id, _)) = all_lmbs.first() {
  1851. 280.78 s > 2602 | | basis_ids.push(*basis_id);
  1852. 280.78 s > 2603 | | }
  1853. 280.78 s > 2604 | | }
  1854. 280.78 s > | |_____________^
  1855. 280.78 s > |
  1856. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#collapsible_if
  1857. 280.78 s > help: collapse nested if block
  1858. 280.78 s > |
  1859. 280.78 s > 2600 ~ if basis_ids.is_empty() && optimized_lmbs.is_empty()
  1860. 280.78 s > 2601 ~ && let Some((basis_id, _)) = all_lmbs.first() {
  1861. 280.78 s > 2602 | basis_ids.push(*basis_id);
  1862. 280.78 s > 2603 ~ }
  1863. 280.78 s > |
  1864. 280.78 s >
  1865. 280.78 s > error: using `clone` on type `Complex<F<f64>>` which implements the `Copy` trait
  1866. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:160:32
  1867. 280.78 s > |
  1868. 280.78 s > 160 | value: value.values[0].clone(),
  1869. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `value.values[0]`
  1870. 280.78 s > |
  1871. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  1872. 280.78 s > = note: `-D clippy::clone-on-copy` implied by `-D warnings`
  1873. 280.78 s > = help: to override `-D warnings` add `#[allow(clippy::clone_on_copy)]`
  1874. 280.78 s >
  1875. 280.78 s > error: the loop variable `column` is only used to index `work`
  1876. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:324:27
  1877. 280.78 s > |
  1878. 280.78 s > 324 | for column in (pivot + 1)..dimension {
  1879. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^
  1880. 280.78 s > |
  1881. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#needless_range_loop
  1882. 280.78 s > help: consider using an iterator
  1883. 280.78 s > |
  1884. 280.78 s > 324 - for column in (pivot + 1)..dimension {
  1885. 280.78 s > 324 + for <item> in work.iter_mut().take(dimension).skip((pivot + 1)) {
  1886. 280.78 s > |
  1887. 280.78 s >
  1888. 280.78 s > error: manual implementation of an assign operation
  1889. 280.78 s > --> crates/gammalooprs/src/integrands/process/mod.rs:3632:29
  1890. 280.78 s > |
  1891. 280.78 s > 3632 | / ... mapped_sample.sample.jacobian = mapped_sample.sample.jacobian
  1892. 280.78 s > 3633 | | ... * F::from_f64(partition_weight * channel_count);
  1893. 280.78 s > | |_________________________________________________________________________^ help: replace it with: `mapped_sample.sample.jacobian *= F::from_f64(partition_weight * channel_count)`
  1894. 280.78 s > |
  1895. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#assign_op_pattern
  1896. 280.78 s >
  1897. 280.78 s > error: manual implementation of an assign operation
  1898. 280.78 s > --> crates/gammalooprs/src/integrands/process/mod.rs:4207:33
  1899. 280.78 s > |
  1900. 280.78 s > 4207 | / ... mapped_sample.sample.jacobian = mapped_sample.sample.jacobian
  1901. 280.78 s > 4208 | | ... * F::from_f64(partition_weight * channel_count);
  1902. 280.78 s > | |_________________________________________________________________________^ help: replace it with: `mapped_sample.sample.jacobian *= F::from_f64(partition_weight * channel_count)`
  1903. 280.78 s > |
  1904. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#assign_op_pattern
  1905. 280.78 s >
  1906. 280.78 s > error: you seem to be trying to use `match` to destructure a single infallible pattern. Consider using `let`
  1907. 280.78 s > --> crates/gammalooprs/src/integrate/mod.rs:3342:5
  1908. 280.78 s > |
  1909. 280.78 s > 3342 | / let process_integrand = match integrand {
  1910. 280.78 s > 3343 | | Integrand::ProcessIntegrand(process_integrand) => process_integrand,
  1911. 280.78 s > 3344 | | #[cfg(test)]
  1912. 280.78 s > 3345 | | Integrand::TestProbe(_) => return Vec::new(),
  1913. 280.78 s > 3346 | | };
  1914. 280.78 s > | |______^ help: try: `let Integrand::ProcessIntegrand(process_integrand) = integrand;`
  1915. 280.78 s > |
  1916. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#infallible_destructuring_match
  1917. 280.78 s > = note: `-D clippy::infallible-destructuring-match` implied by `-D warnings`
  1918. 280.78 s > = help: to override `-D warnings` add `#[allow(clippy::infallible_destructuring_match)]`
  1919. 280.78 s >
  1920. 280.78 s > error: you seem to be trying to use `match` to destructure a single infallible pattern. Consider using `let`
  1921. 280.78 s > --> crates/gammalooprs/src/integrate/mod.rs:3359:5
  1922. 280.78 s > |
  1923. 280.78 s > 3359 | / let process_integrand = match integrand {
  1924. 280.78 s > 3360 | | Integrand::ProcessIntegrand(process_integrand) => process_integrand,
  1925. 280.78 s > 3361 | | #[cfg(test)]
  1926. 280.78 s > 3362 | | Integrand::TestProbe(_) => return false,
  1927. 280.78 s > 3363 | | };
  1928. 280.78 s > | |______^ help: try: `let Integrand::ProcessIntegrand(process_integrand) = integrand;`
  1929. 280.78 s > |
  1930. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#infallible_destructuring_match
  1931. 280.78 s >
  1932. 280.78 s > error: this `impl` can be derived
  1933. 280.78 s > --> crates/gammalooprs/src/settings/runtime.rs:1259:1
  1934. 280.78 s > |
  1935. 280.78 s > 1259 | / impl Default for SamplingChannelDefinition {
  1936. 280.78 s > 1260 | | fn default() -> Self {
  1937. 280.78 s > 1261 | | Self {
  1938. 280.78 s > 1262 | | around: String::new(),
  1939. 280.78 s > ... |
  1940. 280.78 s > 1268 | | }
  1941. 280.78 s > | |_^
  1942. 280.78 s > |
  1943. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#derivable_impls
  1944. 280.78 s > = note: `-D clippy::derivable-impls` implied by `-D warnings`
  1945. 280.78 s > = help: to override `-D warnings` add `#[allow(clippy::derivable_impls)]`
  1946. 280.78 s > help: replace the manual implementation with a derive attribute
  1947. 280.78 s > |
  1948. 280.78 s > 1249 + #[derive(Default)]
  1949. 280.78 s > 1250 | pub struct SamplingChannelDefinition {
  1950. 280.78 s > |
  1951. 280.78 s >
  1952. 280.78 s > error: this `impl` can be derived
  1953. 280.78 s > --> crates/gammalooprs/src/settings/runtime.rs:1285:1
  1954. 280.78 s > |
  1955. 280.78 s > 1285 | / impl Default for SamplingChannelSelection {
  1956. 280.78 s > 1286 | | fn default() -> Self {
  1957. 280.78 s > 1287 | | Self {
  1958. 280.78 s > 1288 | | weight: SamplingChannelWeight::default(),
  1959. 280.78 s > ... |
  1960. 280.78 s > 1294 | | }
  1961. 280.78 s > | |_^
  1962. 280.78 s > |
  1963. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#derivable_impls
  1964. 280.78 s > help: replace the manual implementation with a derive attribute
  1965. 280.78 s > |
  1966. 280.78 s > 1277 + #[derive(Default)]
  1967. 280.78 s > 1278 | pub struct SamplingChannelSelection {
  1968. 280.78 s > |
  1969. 280.78 s >
  1970. 280.78 s > error: could not compile `gammalooprs` (lib) due to 21 previous errors
  1971. 280.78 s > warning: build failed, waiting for other jobs to finish...
  1972. 280.78 s > error: using `clone` on type `F<f64>` which implements the `Copy` trait
  1973. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:2358:14
  1974. 280.78 s > |
  1975. 280.78 s > 2358 | (point.jacobian.clone() * point.inverse_jacobian.clone() - F(1.0)).abs() < F(1.0e-12)
  1976. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `point.jacobian`
  1977. 280.78 s > |
  1978. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  1979. 280.78 s > = note: `-D clippy::clone-on-copy` implied by `-D warnings`
  1980. 280.78 s > = help: to override `-D warnings` add `#[allow(clippy::clone_on_copy)]`
  1981. 280.78 s >
  1982. 280.78 s > error: using `clone` on type `F<f64>` which implements the `Copy` trait
  1983. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_maps.rs:2358:39
  1984. 280.78 s > |
  1985. 280.78 s > 2358 | (point.jacobian.clone() * point.inverse_jacobian.clone() - F(1.0)).abs() < F(1.0e-12)
  1986. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `point.inverse_jacobian`
  1987. 280.78 s > |
  1988. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  1989. 280.78 s >
  1990. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  1991. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3051:9
  1992. 280.78 s > |
  1993. 280.78 s > 3051 | selection.default_channel_selection = vec!["ordinary".into()];
  1994. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  1995. 280.78 s > |
  1996. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["ordinary".into()], ..Default::default() }` and removing relevant reassignments
  1997. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3050:9
  1998. 280.78 s > |
  1999. 280.78 s > 3050 | let mut selection = SamplingChannelSelection::default();
  2000. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2001. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2002. 280.78 s > = note: `-D clippy::field-reassign-with-default` implied by `-D warnings`
  2003. 280.78 s > = help: to override `-D warnings` add `#[allow(clippy::field_reassign_with_default)]`
  2004. 280.78 s >
  2005. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2006. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3188:9
  2007. 280.78 s > |
  2008. 280.78 s > 3188 | selection.default_channel_selection = vec!["missing".into()];
  2009. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2010. 280.78 s > |
  2011. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["missing".into()], ..Default::default() }` and removing relevant reassignments
  2012. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3187:9
  2013. 280.78 s > |
  2014. 280.78 s > 3187 | let mut selection = SamplingChannelSelection::default();
  2015. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2016. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2017. 280.78 s >
  2018. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2019. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3208:9
  2020. 280.78 s > |
  2021. 280.78 s > 3208 | selection.default_channel_selection = vec!["named".into()];
  2022. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2023. 280.78 s > |
  2024. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["named".into()], ..Default::default() }` and removing relevant reassignments
  2025. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3207:9
  2026. 280.78 s > |
  2027. 280.78 s > 3207 | let mut selection = SamplingChannelSelection::default();
  2028. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2029. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2030. 280.78 s >
  2031. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2032. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3231:9
  2033. 280.78 s > |
  2034. 280.78 s > 3231 | selection.default_channel_selection = vec!["threshold".into()];
  2035. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2036. 280.78 s > |
  2037. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  2038. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3230:9
  2039. 280.78 s > |
  2040. 280.78 s > 3230 | let mut selection = SamplingChannelSelection::default();
  2041. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2042. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2043. 280.78 s >
  2044. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2045. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3283:9
  2046. 280.78 s > |
  2047. 280.78 s > 3283 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  2048. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2049. 280.78 s > |
  2050. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  2051. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3282:9
  2052. 280.78 s > |
  2053. 280.78 s > 3282 | let mut selection = SamplingChannelSelection::default();
  2054. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2055. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2056. 280.78 s >
  2057. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2058. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3300:9
  2059. 280.78 s > |
  2060. 280.78 s > 3300 | selection.default_channel_selection = vec!["auto:surfaces".into(), "auto:lmb".into()];
  2061. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2062. 280.78 s > |
  2063. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:surfaces".into(), "auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  2064. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3299:9
  2065. 280.78 s > |
  2066. 280.78 s > 3299 | let mut selection = SamplingChannelSelection::default();
  2067. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2068. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2069. 280.78 s >
  2070. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2071. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3310:9
  2072. 280.78 s > |
  2073. 280.78 s > 3310 | selection.default_channel_selection = vec!["auto:surfaces".into()];
  2074. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2075. 280.78 s > |
  2076. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:surfaces".into()], ..Default::default() }` and removing relevant reassignments
  2077. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3309:9
  2078. 280.78 s > |
  2079. 280.78 s > 3309 | let mut selection = SamplingChannelSelection::default();
  2080. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2081. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2082. 280.78 s >
  2083. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2084. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3331:13
  2085. 280.78 s > |
  2086. 280.78 s > 3331 | selection.default_channel_selection = vec![preset.into()];
  2087. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2088. 280.78 s > |
  2089. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec![preset.into()], ..Default::default() }` and removing relevant reassignments
  2090. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3330:13
  2091. 280.78 s > |
  2092. 280.78 s > 3330 | let mut selection = SamplingChannelSelection::default();
  2093. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2094. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2095. 280.78 s >
  2096. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2097. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3362:9
  2098. 280.78 s > |
  2099. 280.78 s > 3362 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  2100. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2101. 280.78 s > |
  2102. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  2103. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3361:9
  2104. 280.78 s > |
  2105. 280.78 s > 3361 | let mut selection = SamplingChannelSelection::default();
  2106. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2107. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2108. 280.78 s >
  2109. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2110. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3444:13
  2111. 280.78 s > |
  2112. 280.78 s > 3444 | selection.default_channel_selection = vec![name.to_owned()];
  2113. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2114. 280.78 s > |
  2115. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec![name.to_owned()], ..Default::default() }` and removing relevant reassignments
  2116. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3443:13
  2117. 280.78 s > |
  2118. 280.78 s > 3443 | let mut selection = SamplingChannelSelection::default();
  2119. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2120. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2121. 280.78 s >
  2122. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2123. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3478:9
  2124. 280.78 s > |
  2125. 280.78 s > 3478 | selection.default_channel_selection = vec!["threshold".into()];
  2126. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2127. 280.78 s > |
  2128. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  2129. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3477:9
  2130. 280.78 s > |
  2131. 280.78 s > 3477 | let mut selection = SamplingChannelSelection::default();
  2132. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2133. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2134. 280.78 s >
  2135. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2136. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3523:9
  2137. 280.78 s > |
  2138. 280.78 s > 3523 | selection.default_channel_selection = vec!["conditional".into()];
  2139. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2140. 280.78 s > |
  2141. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["conditional".into()], ..Default::default() }` and removing relevant reassignments
  2142. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3522:9
  2143. 280.78 s > |
  2144. 280.78 s > 3522 | let mut selection = SamplingChannelSelection::default();
  2145. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2146. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2147. 280.78 s >
  2148. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2149. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3585:9
  2150. 280.78 s > |
  2151. 280.78 s > 3585 | selection.default_channel_selection = vec!["left_chart".into(), "right_chart".into()];
  2152. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2153. 280.78 s > |
  2154. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["left_chart".into(), "right_chart".into()], ..Default::default() }` and removing relevant reassignments
  2155. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3584:9
  2156. 280.78 s > |
  2157. 280.78 s > 3584 | let mut selection = SamplingChannelSelection::default();
  2158. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2159. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2160. 280.78 s >
  2161. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2162. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3653:9
  2163. 280.78 s > |
  2164. 280.78 s > 3653 | selection.default_channel_selection = vec!["h".into(), "z".into()];
  2165. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2166. 280.78 s > |
  2167. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["h".into(), "z".into()], ..Default::default() }` and removing relevant reassignments
  2168. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3652:9
  2169. 280.78 s > |
  2170. 280.78 s > 3652 | let mut selection = SamplingChannelSelection::default();
  2171. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2172. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2173. 280.78 s >
  2174. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2175. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3697:9
  2176. 280.78 s > |
  2177. 280.78 s > 3697 | selection.default_channel_selection = vec!["auto:lmb".into()];
  2178. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2179. 280.78 s > |
  2180. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  2181. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3696:9
  2182. 280.78 s > |
  2183. 280.78 s > 3696 | let mut selection = SamplingChannelSelection::default();
  2184. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2185. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2186. 280.78 s >
  2187. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2188. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3719:9
  2189. 280.78 s > |
  2190. 280.78 s > 3719 | selection.default_channel_selection = vec!["auto:lmb".into()];
  2191. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2192. 280.78 s > |
  2193. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  2194. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3718:9
  2195. 280.78 s > |
  2196. 280.78 s > 3718 | let mut selection = SamplingChannelSelection::default();
  2197. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2198. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2199. 280.78 s >
  2200. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2201. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3771:9
  2202. 280.78 s > |
  2203. 280.78 s > 3771 | selection.default_channel_selection = vec!["named".into()];
  2204. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2205. 280.78 s > |
  2206. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["named".into()], ..Default::default() }` and removing relevant reassignments
  2207. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3770:9
  2208. 280.78 s > |
  2209. 280.78 s > 3770 | let mut selection = SamplingChannelSelection::default();
  2210. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2211. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2212. 280.78 s >
  2213. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2214. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3820:9
  2215. 280.78 s > |
  2216. 280.78 s > 3820 | selection.default_channel_selection = vec!["threshold".into()];
  2217. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2218. 280.78 s > |
  2219. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  2220. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3819:9
  2221. 280.78 s > |
  2222. 280.78 s > 3819 | let mut selection = SamplingChannelSelection::default();
  2223. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2224. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2225. 280.78 s >
  2226. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2227. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3867:9
  2228. 280.78 s > |
  2229. 280.78 s > 3867 | selection.default_channel_selection = vec!["cut_channel".into()];
  2230. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2231. 280.78 s > |
  2232. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_channel".into()], ..Default::default() }` and removing relevant reassignments
  2233. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3866:9
  2234. 280.78 s > |
  2235. 280.78 s > 3866 | let mut selection = SamplingChannelSelection::default();
  2236. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2237. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2238. 280.78 s >
  2239. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2240. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3897:9
  2241. 280.78 s > |
  2242. 280.78 s > 3897 | selection.default_channel_selection = vec!["right_channel".into()];
  2243. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2244. 280.78 s > |
  2245. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["right_channel".into()], ..Default::default() }` and removing relevant reassignments
  2246. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3896:9
  2247. 280.78 s > |
  2248. 280.78 s > 3896 | let mut selection = SamplingChannelSelection::default();
  2249. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2250. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2251. 280.78 s >
  2252. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2253. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3924:9
  2254. 280.78 s > |
  2255. 280.78 s > 3924 | selection.default_channel_selection = vec!["cut_chart".into()];
  2256. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2257. 280.78 s > |
  2258. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_chart".into()], ..Default::default() }` and removing relevant reassignments
  2259. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3923:9
  2260. 280.78 s > |
  2261. 280.78 s > 3923 | let mut selection = SamplingChannelSelection::default();
  2262. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2263. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2264. 280.78 s >
  2265. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2266. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3959:13
  2267. 280.78 s > |
  2268. 280.78 s > 3959 | selection.default_channel_selection = vec![name.to_owned()];
  2269. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2270. 280.78 s > |
  2271. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec![name.to_owned()], ..Default::default() }` and removing relevant reassignments
  2272. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3958:13
  2273. 280.78 s > |
  2274. 280.78 s > 3958 | let mut selection = SamplingChannelSelection::default();
  2275. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2276. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2277. 280.78 s >
  2278. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2279. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3996:9
  2280. 280.78 s > |
  2281. 280.78 s > 3996 | selection.default_channel_selection = vec!["cut_chart".into()];
  2282. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2283. 280.78 s > |
  2284. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["cut_chart".into()], ..Default::default() }` and removing relevant reassignments
  2285. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:3995:9
  2286. 280.78 s > |
  2287. 280.78 s > 3995 | let mut selection = SamplingChannelSelection::default();
  2288. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2289. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2290. 280.78 s >
  2291. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2292. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4073:9
  2293. 280.78 s > |
  2294. 280.78 s > 4073 | selection.default_channel_selection = vec!["left_target".into()];
  2295. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2296. 280.78 s > |
  2297. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["left_target".into()], ..Default::default() }` and removing relevant reassignments
  2298. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4072:9
  2299. 280.78 s > |
  2300. 280.78 s > 4072 | let mut selection = SamplingChannelSelection::default();
  2301. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2302. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2303. 280.78 s >
  2304. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2305. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4117:9
  2306. 280.78 s > |
  2307. 280.78 s > 4117 | selection.default_channel_selection = vec!["threshold".into()];
  2308. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2309. 280.78 s > |
  2310. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["threshold".into()], ..Default::default() }` and removing relevant reassignments
  2311. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4116:9
  2312. 280.78 s > |
  2313. 280.78 s > 4116 | let mut selection = SamplingChannelSelection::default();
  2314. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2315. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2316. 280.78 s >
  2317. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2318. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4141:9
  2319. 280.78 s > |
  2320. 280.78 s > 4141 | selection.default_channel_selection = vec!["joint".into()];
  2321. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2322. 280.78 s > |
  2323. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  2324. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4140:9
  2325. 280.78 s > |
  2326. 280.78 s > 4140 | let mut selection = SamplingChannelSelection::default();
  2327. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2328. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2329. 280.78 s >
  2330. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2331. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4174:9
  2332. 280.78 s > |
  2333. 280.78 s > 4174 | selection.default_channel_selection = vec!["joint".into()];
  2334. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2335. 280.78 s > |
  2336. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  2337. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4173:9
  2338. 280.78 s > |
  2339. 280.78 s > 4173 | let mut selection = SamplingChannelSelection::default();
  2340. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2341. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2342. 280.78 s >
  2343. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2344. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4231:9
  2345. 280.78 s > |
  2346. 280.78 s > 4231 | selection.default_channel_selection = vec!["joint".into()];
  2347. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2348. 280.78 s > |
  2349. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["joint".into()], ..Default::default() }` and removing relevant reassignments
  2350. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4230:9
  2351. 280.78 s > |
  2352. 280.78 s > 4230 | let mut selection = SamplingChannelSelection::default();
  2353. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2354. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2355. 280.78 s >
  2356. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2357. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4335:9
  2358. 280.78 s > |
  2359. 280.78 s > 4335 | selection.default_channel_selection = vec!["auto:lmb".into()];
  2360. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2361. 280.78 s > |
  2362. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  2363. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4334:9
  2364. 280.78 s > |
  2365. 280.78 s > 4334 | let mut selection = SamplingChannelSelection::default();
  2366. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2367. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2368. 280.78 s >
  2369. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2370. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4383:9
  2371. 280.78 s > |
  2372. 280.78 s > 4383 | selection.default_channel_selection = vec!["auto:lmb".into()];
  2373. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2374. 280.78 s > |
  2375. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  2376. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4382:9
  2377. 280.78 s > |
  2378. 280.78 s > 4382 | let mut selection = SamplingChannelSelection::default();
  2379. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2380. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2381. 280.78 s >
  2382. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2383. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4417:9
  2384. 280.78 s > |
  2385. 280.78 s > 4417 | selection.default_channel_selection = vec!["auto:lmb".into()];
  2386. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2387. 280.78 s > |
  2388. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:lmb".into()], ..Default::default() }` and removing relevant reassignments
  2389. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_selection.rs:4416:9
  2390. 280.78 s > |
  2391. 280.78 s > 4416 | let mut selection = SamplingChannelSelection::default();
  2392. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2393. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2394. 280.78 s >
  2395. 280.78 s > error: using `clone` on type `Complex<F<f64>>` which implements the `Copy` trait
  2396. 280.78 s > --> crates/gammalooprs/src/integrands/process/sampling_evaluator.rs:160:32
  2397. 280.78 s > |
  2398. 280.78 s > 160 | value: value.values[0].clone(),
  2399. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^ help: try removing the `clone` call: `value.values[0]`
  2400. 280.78 s > |
  2401. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#clone_on_copy
  2402. 280.78 s >
  2403. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2404. 280.78 s > --> crates/gammalooprs/src/integrands/process/mod.rs:5872:9
  2405. 280.78 s > |
  2406. 280.78 s > 5872 | selection.default_channel_selection = vec!["auto:optimized_lmb".into()];
  2407. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2408. 280.78 s > |
  2409. 280.78 s > note: consider initializing the variable with `settings::runtime::SamplingChannelSelection { default_channel_selection: vec!["auto:optimized_lmb".into()], ..Default::default() }` and removing relevant reassignments
  2410. 280.78 s > --> crates/gammalooprs/src/integrands/process/mod.rs:5871:9
  2411. 280.78 s > |
  2412. 280.78 s > 5871 | let mut selection = SamplingChannelSelection::default();
  2413. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2414. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2415. 280.78 s >
  2416. 280.78 s > error: field assignment outside of initializer for an instance created with Default::default()
  2417. 280.78 s > --> crates/gammalooprs/src/integrands/process/mod.rs:5875:9
  2418. 280.78 s > |
  2419. 280.78 s > 5875 | parameterization_settings.sampling_channels = selection;
  2420. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2421. 280.78 s > |
  2422. 280.78 s > note: consider initializing the variable with `settings::runtime::ParameterizationSettings { sampling_channels: selection, ..Default::default() }` and removing relevant reassignments
  2423. 280.78 s > --> crates/gammalooprs/src/integrands/process/mod.rs:5874:9
  2424. 280.78 s > |
  2425. 280.78 s > 5874 | let mut parameterization_settings = ParameterizationSettings::default();
  2426. 280.78 s > | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  2427. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#field_reassign_with_default
  2428. 280.78 s >
  2429. 280.78 s > error: large size difference between variants
  2430. 280.78 s > --> crates/gammalooprs/src/integrands/mod.rs:54:1
  2431. 280.78 s > |
  2432. 280.78 s > 54 | / pub enum Integrand {
  2433. 280.78 s > 55 | | ProcessIntegrand(Box<ProcessIntegrand>),
  2434. 280.78 s > | | --------------------------------------- the second-largest variant contains at least 8 bytes
  2435. 280.78 s > 56 | | #[cfg(test)]
  2436. 280.78 s > 57 | | TestProbe(TestProbeIntegrand),
  2437. 280.78 s > | | ----------------------------- the largest variant contains at least 888 bytes
  2438. 280.78 s > 58 | | }
  2439. 280.78 s > | |_^ the entire enum is at least 888 bytes
  2440. 280.78 s > |
  2441. 280.78 s > = help: for further information visit https://rust-lang.github.io/rust-clippy/rust-1.97.0/index.html#large_enum_variant
  2442. 280.78 s > = note: `-D clippy::large-enum-variant` implied by `-D warnings`
  2443. 280.78 s > = help: to override `-D warnings` add `#[allow(clippy::large_enum_variant)]`
  2444. 280.78 s > help: consider boxing the large fields or introducing indirection in some other way to reduce the total size of the enum
  2445. 280.78 s > |
  2446. 280.78 s > 57 - TestProbe(TestProbeIntegrand),
  2447. 280.78 s > 57 + TestProbe(Box<TestProbeIntegrand>),
  2448. 280.78 s > |
  2449. 280.78 s >
  2450. 280.78 s > error: could not compile `gammalooprs` (lib test) due to 55 previous errors
  2451. 280.78 s For full logs, run:
  2452. 280.78 s nix log /nix/store/z8sf2mg4fcvfiz9rpa1fig6kk8xplfhj-gammaloop-workspace-clippy-0.1.0.drv
  2453. 280.91 s Build failed.
More Logs Raw Logs

Agent Instructions

Wait for completion, without logs:

curl --netrc -N https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/f991b56ff9e316a33c50dbe0152b84de28ffecfb/7828b947-43cd-46c8-841e-a91de2193ba5/wait

Latest logs, with timestamps (streams while running):

curl --netrc -N https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/f991b56ff9e316a33c50dbe0152b84de28ffecfb/7828b947-43cd-46c8-841e-a91de2193ba5/tail

All logs, with timestamps (available after completion):

curl --netrc https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/f991b56ff9e316a33c50dbe0152b84de28ffecfb/7828b947-43cd-46c8-841e-a91de2193ba5/logs

Raw logs, from the start (no timestamps):

curl --netrc -N https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/f991b56ff9e316a33c50dbe0152b84de28ffecfb/7828b947-43cd-46c8-841e-a91de2193ba5/raw-logs

Content types available for /logs and /tail (use Accept header):

Example:

curl --netrc -H "Accept: text/csv" https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/f991b56ff9e316a33c50dbe0152b84de28ffecfb/7828b947-43cd-46c8-841e-a91de2193ba5/logs

Reproduce locally: https://nix-ci.com/gh:alphal00p:gammaloop/advanced_sampling/f991b56ff9e316a33c50dbe0152b84de28ffecfb/7828b947-43cd-46c8-841e-a91de2193ba5/repro

This page is also available in machine-friendly formats. Request one with the Accept header:

For more instructions, fetch https://nix-ci.com/instructions .